Can the Flexible NBR Rubber Fuel & Oil Hose with Galvanized Steel Braid, High Pressure DIN 73379 be used with gear oil and heating oil in small vehicles and industrial equipment?

Yes. Flexible NBR Rubber Fuel & Oil Hose with Galvanized Steel Braid, High Pressure DIN 73379, for Gasoline, Diesel, Oils, Water, Air & Coolants is suitable for gear oil and heating oil in small vehicles and industrial equipment. Its smooth NBR inner layer is compatible with petroleum-based oils, and the galvanized steel braid provides the required working pressures (6â25 bar depending on diameter). Operating temperature range (-35Â°C to +90Â°C, temporarily up to 110Â°C) also covers typical service conditions. Ensure selected hose diameter and pressure rating match your system and verify chemical compatibility for any additives or atypical fluids.

Flexible NBR Rubber Fuel & Oil Hose with Galvanized Steel Braid, High Pressure DIN 73379, for Gasoline, Diesel, Oils, Water, Air & Coolants

All products, Oil and petroleum hoses/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-35
Vacuum resistance	no
Standard length [m]	100, 15, 25, 50
Reinforcement	steel wire mesh

Flexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as gear oil, heating oil, and diesel. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth, black NBR rubber. The external reinforcing braid made of galvanized steel ensures high pressure resistance. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 6 bar to 25 bar – depending on the hose diameter. Operating temperature: from -35°C to +90°C (temporarily 110°C).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
CB-AH1-03X07	Hose AH1 3 x 7 mm, steel braid	3	25
CB-AH1-04X08	Hose AH1 4 x 8 mm, steel braid	4	25
CB-AH1-05X10	Hose AH1 5 x 10 mm, steel braid	5	25
CB-AH1-06X12	Hose AH1 6 x 12 mm, steel braid	6	25
CB-AH1-07X13	Hose AH1 7 x 13 mm, steel braid	6	25
CB-AH1-08X14	Hose AH1 8 x 14 mm, steel braid	8	25
CB-AH1-09X16	AH1 hose 9 x 16 mm, steel braid	8	20
CB-AH1-10X16	AH1 hose 10 x 16 mm, steel braid	10	20
CB-AH1-12X20	Hose AH1 12 x 20 mm, steel braid	12	20
CB-AH1-13X19	Hose AH1 13 x 19 mm, steel braid	12	20
CB-AH1-14X22	Hose AH1 14 x 22 mm, steel braid	14	15
CB-AH1-15X24	Hose AH1 15 x 24 mm, steel braid	16	15
CB-AH1-18X26	Hose AH1 18 x 26 mm, steel braid	18	15
CB-AH1-20X29	Hose AH1 20 x 29 mm, steel braid	20	10
CB-AH1-24X33	Hose AH1 24 x 33 mm, steel braid	25	10
CB-AH1-25X35	Hose AH1 25 x 35 mm, steel braid	25	8
CB-AH1-30X40	Hose AH1 30 x 40 mm, steel braid	30	6

Flexible, soft rubber hose with an external braid made of galvanized steel, intended for gasoline and petroleum-based oils such as gear oil, heating oil, and diesel. Installed in fuel and oil systems of small vehicles and industrial equipment. Can also be used for water, cooling fluids, non-oxidizing detergents, and air. Based on the requirements of standard DIN 73379. Inner layer made of smooth, black NBR rubber. The external reinforcing braid made of galvanized steel ensures high pressure resistance. Hose material: black NBR rubber. Reinforcement: external wire braid made of galvanized steel. Working pressure: from 6 bar to 25 bar – depending on the hose diameter. Operating temperature: from -35°C to +90°C (temporarily 110°C).

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-35
Vacuum resistance	no
Standard length [m]	100, 15, 25, 50
Reinforcement	steel wire mesh