Is the DN11.8 water quick connector with hose end, with flange, stainless steel compatible with standard 1/2" hose fittings and water guns?

Yes . the DN11.8 water quick connector with hose end, with flange, stainless steel is compatible with standard 1/2" hose fittings and water guns in typical cleaning setups. The product is designed as a hose-end quick coupling to facilitate rapid connection of a water gun or other washing accessories to a hose. Its construction in AISI 303/304L stainless steel and rating to 200 bar working pressure and up to +100Â°C indicate itâs built to withstand pressures and temperatures commonly seen with pressure washers and garden/industrial water guns. One caveat: compatibility depends on the actual thread/type standard of the mating fitting (BSP, NPT, garden hose thread, etc.) and the internal diameter of the hose. "DN11.8" corresponds closely to a nominal 1/2" size, but confirm thread standard and hose ID match your water gun or hose fittings before purchase to ensure a proper seal and safe operation.

Does the DN11.8 water quick connector with hose end, with flange, stainless steel withstand prolonged use at 200 bar and +100Â°C?

Based on the provided description, the DN11.8 water quick connector with hose end, with flange, stainless steel is specified for a working pressure of 200 bar and an operating temperature up to +100Â°C. Constructed from AISI 303/304L stainless steel, it is designed to handle those nominal conditions. However, prolonged use at the upper limits (continuous 200 bar and sustained +100Â°C) can accelerate wear, increase risk of seal degradation and fatigue, and may reduce service life compared with intermittent use. For guaranteed long-term performance under continuous high-pressure/high-temperature duty, verify compatibility of internal seals, inspect for corrosion/creep effects, and consult the manufacturerâs detailed specifications, maintenance intervals, and any pressure-temperature derating charts.

Can the DN11.8 water quick connector with hose end, with flange, stainless steel be used with hot water above 60Â°C?

Yes. the DN11.8 water quick connector with hose end, with flange, stainless steel can be used with hot water above 60Â°C. The product specification states an operating temperature up to +100Â°C, so temperatures between 60Â°C and 100Â°C fall within its rated range. Made from AISI 303/304L stainless steel and rated for 200 bar working pressure, it is suitable for high-temperature water applications up to that limit. Important considerations: - Ensure the connected hose and any other accessories (seals, O-rings, gaskets) are rated for the same temperature range; workmanship and materials outside the connector may limit overall system temperature tolerance. - Maintain the 200 bar working pressure limit; higher pressures at elevated temperatures can affect safety margins. - For continuous exposure near the upper limit (+100Â°C), verify chemical compatibility and seal aging to avoid premature wear.

Plug water quick coupling DN11.8 with fitting for hose, with a flange, steel stainless

All products, Quick couplings for water/

Additional information

Material	SS – stainless steel

Plug quick coupling DN11.8 with fitting for hose, with a flange, facilitating fast connection spray gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-ADAPH-16-C21	Quick coupling plug DN11.8, Fitting for hose 5/8", flange 21 mm, stainless steel	16	200	In stock	0 zł		Enquiry
AK-ADAPH-19-C24	Quick coupling plug DN11.8, Fitting for hose 3/4", flange 24 mm, stainless steel	20	200	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug quick coupling DN11.8 with fitting for hose, with a flange, facilitating fast connection spray gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.