Is the NiTO 1" water quick connector socket with hose end and shut-off valve, brass safe for use with gasoline or oils?

No . the NiTO 1" water quick connector socket with hose end and shut-off valve, brass is not safe for use with gasoline or oils. The sealing material is NBR (nitrile rubber), which the product specification explicitly states is "not suitable for gasoline and oils." Use is limited to water applications and compatible fluids within the stated operating temperature (up to +80Â°C) and working pressure (up to 25 bar). If you require compatibility with gasoline or oils, look for connectors with fuel-resistant seals such as FKM/Viton or other approved materials.

Can the NiTO 1" water quick connector socket with hose end and shut-off valve, brass be used with potable (drinking) water?

Yes. the NiTO 1" water quick connector socket with hose end and shut-off valve, brass can be used with potable (drinking) water, with some reasonable caveats. Why: - The body material is chrome-plated brass, which is commonly used for potable water fittings. - Sealing materials listed are NBR (nitrile) and EPDM for the valve O-ring. EPDM is widely accepted for drinking water applications; NBR is often acceptable for water but may have limitations depending on local regulations and water treatment chemicals. - Working pressure (up to 25 bar) and operating temperature (up to +80Â°C) are compatible with typical potable water systems. Caveats: - Manufacturerâs documentation or local plumbing codes may require explicit potable-water certification (e.g., NSF/ANSI 61, WRAS or equivalent). The provided description does not state such certifications. - NBR is noted as not suitable for gasoline and oils. that does not preclude potable water use, but if your water contains aggressive disinfectants or high chlorine levels, EPDM is generally more resistant. - For guaranteed compliance and safety, verify with the supplier/manufacturer for potable-water approval or certified seals for drinking-water use in your jurisdiction. Summary: Likely suitable for potable water based on materials, but confirm required drinking-water certifications with the manufacturer or local authority before installation.

NiTO 1″ water quick connector socket with hose end and shut-off valve, brass

Q: Can the NiTO 1" water quick connector socket with hose end and shut-off valve, brass be used with hot water up to +80Â°C?

Yes. The NiTO 1" water quick connector socket with hose end and shut-off valve, brass is rated for operating temperatures up to +80Â°C and a working pressure up to 25 bar, so it can be used with hot water up to +80Â°C. Note that sealing is NBR (not suitable for gasoline and oils); the valve O-ring uses EPDM.

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

High-quality quick-connect water socket NiTO 1″ with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry
NT-7353SA3	1" quick coupling socket with valve, with 1" hose fitting, chrome-plated brass	25	25

High-quality quick-connect water socket NiTO 1″ with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.