Is the Seal set for ISO 15552 actuator fi 160 - 200, NBR compatible with ISO 15552 actuators from different manufacturers?

Short answer: Generally yes, but with important caveats. The Seal set for ISO 15552 actuator fi 160 - 200, NBR is designed to the ISO 15552 standard and nominal diameters Ã160 and Ã200, so it is intended to be interchangeable across actuators that conform strictly to that standard. However, compatibility in practice depends on several factors: - Conformance level: Both the actuator and the seal set must adhere to the ISO 15552 dimensional and tolerance specifications. Minor deviations by some manufacturers can prevent a perfect fit. - Variant differences: Some manufacturers supply proprietary features (additional grooves, different groove depths, backup rings, or integrated wipers) that are not covered by a generic seal set. - Material suitability: The Seal set for ISO 15552 actuator fi 160 - 200, NBR is made of NBR (nitrile). NBR is compatible with many common pneumatic fluids and applications but may not be suitable for aggressive chemicals, high temperatures, or food-grade requirements.so material compatibility must be checked against the actuatorâs operating environment. - Wear and assembly: Proper installation and correct groove condition are necessary. If the actuatorâs seal grooves are worn or damaged, the new seals may not seal properly even if dimensions match. Recommendation: Verify the actuatorâs conformance to ISO 15552 dimensions for the specific diameter (Ã160 or Ã200), confirm there are no proprietary groove features, and check that NBR is acceptable for your application conditions before assuming interchangeability.

Can the Seal set for ISO 15552 actuator fi 160 - 200, NBR withstand temperatures and chemicals specified for my application?

Seal set for ISO 15552 actuator fi 160 - 200, NBR: NBR (nitrile rubber) offers good resistance to mineral oils, hydraulic fluids, greases and fuels, and performs well in temperatures roughly from -30Â°C to +100Â°C (short peaks up to ~120Â°C may be tolerated but reduce lifetime). It is less resistant to aromatic hydrocarbons, ketones, strong acids/alkalis, chlorinated solvents and hot water/steam. If your application involves only oils, greases and operating temperatures within the stated range, this seal set is suitable. If it encounters aggressive chemicals listed above, continuous temperatures above ~100Â°C, steam, or oxygen-rich environments, NBR is not recommended-consider FKM/EPDM or specific chemical-resistant compounds. Provide exact chemicals and temperature profile for a definitive compatibility recommendation.

Are installation tools or lubricants recommended for the Seal set for ISO 15552 actuator fi 160 - 200, NBR?

No specific installation tools or lubricants are mentioned in the product description for the Seal set for ISO 15552 actuator fi 160 - 200, NBR. However, general best practices for installing NBR (nitrile) seals in ISO 15552 actuators are recommended: - Use clean, lint-free tools and a debris-free workspace to avoid contaminating or damaging the seals. - Employ soft, non-marring installation tools (plastic or brass drifts, seal drivers) to avoid cutting or nicking the NBR material. - Lightly lubricate seals with a compatible lubricant to ease assembly and prevent rolling or twisting during installation. For NBR, use a phosphate-ester-free, hydraulic- or pneumatic-compatible silicone or mineral-oil-based assembly grease compatible with NBR; avoid solvents and petroleum-based products that can degrade the material. - Apply lubricant sparingly and evenly; excess lubricant can attract contaminants or affect seal performance. - Inspect grooves and mating surfaces for burrs or damage and ensure proper alignment during installation to prevent extrusion or premature wear. - Follow actuator manufacturer torque and assembly guidelines where available. If you require exact tool recommendations or a specific lubricant compatibility list, consult the actuator manufacturerâs installation instructions or contact the seal supplier for certified guidance.