Can SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series be used for steam service at 240Â°C and 690 bar?

Yes . SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series can be used for steam service at 240Â°C and up to 690 bar only if all of the following conditions are met: 1. The socket/seal material used for the coupling is rated for steam at +240Â°C (operating temperature depends on the type of socket seal). Use a seal material specified for highâtemperature steam. 2. The specific coupling size selected is certified for the required working pressure (working pressure is up to 690 bar depending on size) and retains the stated safety factor (2:1) under steam conditions. 3. The assembly and installation follow manufacturer guidelines for steam service (compatibility with steam, thermal expansion, proper tightening, and maintenance). 4. The application complies with MILâCâ51234/other applicable standards and any additional system requirements (e.g., pressure transients, cyclic thermal loading, corrosion considerations). If any of these are not satisfied (seal not rated for 240Â°C steam, size not rated to the required pressure, or manufacturer advises against steam), do not use for this service.

SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series

Q: Can SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series be used for steam up to 240Â°C?

Yes. SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series can be used for steam up to 240Â°C provided the socket seal selected is rated for that temperature. The coupling is made of AISI 316 and the listed operating temperature range is â56Â°C to +240Â°C âdepending on the type of socket seal.â Ensure you choose a steam-compatible seal material and verify the specific size/pressure rating for your application (working pressure up to 690 bar, safety factor 2:1) and any steam-specific compatibility requirements.

Q: Is SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series suitable for hydraulic oil at -56Â°C?

Yes. SNAP-TITE quick connect plug with GW BSP, NPSF without valve, AISI 316 steel, H series is suitable for hydraulic oil at â56Â°C, provided the socket seal material specified for that temperature is used. The productâs operating temperature range is â56Â°C to +240Â°C depending on the type of socket seal, the application includes hydraulic power (hydraulic oil), and the body material (AISI 316) and working pressure ratings (up to 690 bar, SF 2:1) meet typical hydraulic requirements. Ensure the selected seal compound is rated for continuous service at â56Â°C to maintain leak-tightness and mechanical performance.

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel

Quick coupling plug SNAP-TITE with internal BSP and NPSF thread, manufactured in the USA, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 690 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Operating temperature: from -56°C to +240°C – depending on the type of socket seal. Flow has been provided for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SN-SPHN12-12F	H plug 3/4", G 3/4" NPSF, AISI 316, without valve	-	483	In stock	Enquiry
SN-SPHN12-12RP	Plug H 3/4", G 3/4" BSP, AISI 316, without valve	-	483	In stock	Enquiry
SN-SPHN16-16RP	H fitting 1", GW 1" BSP, AISI 316, without valve	-	276	In stock	Enquiry
SN-SPHN24-24RP	H plug 1.1/2", G 1.1/2" BSP, AISI 316, without valve	-	207	In stock	Enquiry
SN-SPHN32-32RP	H 2" plug, 2" BSP female thread, AISI 316, without valve	-	69	In stock	Enquiry
SN-SPHN4-4RP	Plug H 1/4", G 1/4" BSP, AISI 316, without valve	-	690	In stock	Enquiry
SN-SPHN6-6RP	Plug H 3/8", G 3/8" BSP, AISI 316, without valve	-	552	In stock	Enquiry
SN-SPHN8-8RP	Plug H 1/2", G 1/2" BSP, AISI 316, without valve	-	552	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling plug SNAP-TITE with internal BSP and NPSF thread, manufactured in the USA, without valve. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Depending on the application, the appropriate material for the coupling and sealing must be selected. Standard: MIL-C-51234. Working pressure: up to 690 bar (depending on the size of the quick coupling), safety factor 2:1. Material: AISI 316 steel. Operating temperature: from -56°C to +240°C – depending on the type of socket seal. Flow has been provided for a pressure drop of 3 bar.