Is the T end with metric male thread, polyamide compatible with all hoses and suitable for vacuum use up to 10 bar?

No . the "T" end with metric male thread, polyamide Format is not guaranteed compatible with all hoses and not suitable for vacuum use up to 10 bar based on the provided description. The Straight reducing connector for hose, type NA is specified for use in control systems, transport of gases and liquids and in vacuum systems, with a working pressure up to 10 bar and made of acetal copolymer (POM). That means the listed product is POM and rated to 10 bar; a different item described as polyamide would be a different material with potentially different specifications. Compatibility with hoses depends on matching thread size, hose inner diameter, sealing method and material compatibility; vacuum suitability depends on the connector design (sealing, thread type) and whether the stated vacuum rating applies. Therefore you should verify the exact product variant, material (polyamide vs POM), thread dimensions and manufacturer vacuum rating before assuming universal hose compatibility or vacuum performance to 10 bar.

Can the "T" end with metric male thread, polyamide withstand chemical exposure from common industrial gases and liquids?

No - the "T" end with metric male thread, polyamide Format is not suitable for broad chemical exposure. The connector described (Straight reducing connector for hose, type NA) is made of acetal copolymer (POM), rated to 10 bar and intended for control, gas/liquid transport and vacuum systems. Polyamide (PA) and POM have different chemical resistance profiles; polyamide can be vulnerable to strong acids, bases, some solvents and hydrocarbons, and POM can also be attacked by certain solvents (ketones, chlorinated hydrocarbons) and oxidizers. Therefore you must check compatibility for each specific industrial gas or liquid and operating conditions (concentration, temperature, pressure). For aggressive media choose materials explicitly rated for chemical exposure (e.g., stainless steel, PTFE) or consult the manufacturerâs chemical compatibility data before use.

Does the "T" end with metric male thread, polyamide require specific installation tools or torque settings?

Format; The "T" end with metric male thread, polyamide does not explicitly require special installation tools according to the provided description of the Straight reducing connector for hose, type NA. The connector is intended for control systems, gas/liquid transport and vacuum systems, made of acetal copolymer (POM) and rated up to 10 bar. For the metric male threaded polyamide end, common practice is to use standard wrenches or spanners sized to the thread flats, avoid over-tightening, and, if recommended by system design, use appropriate thread sealant (PTFE tape or liquid sealant) compatible with the media and plastic material. Because the body is a polymer, apply moderate torque onlyâhand-tight plus a small additional turn with a wrench is typicalâand follow manufacturer torque values when available to prevent cracking or thread deformation. If no torque specification is provided, err on the side of lower torque and check for leaks under pressure.

“T” end with metric male thread, polyamide

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Straight reducing connector for hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NA-7518904003	Straight reducing connector DN 2.5, hose 4 mm / 3 mm	4	10	In stock	Enquiry
NA-7518906004	Straight reducing connector DN 2.7, hose 6 mm / 4 mm	6	10	In stock	Enquiry
NA-7518908004	Straight reducing connector DN 2.7, hose 8 mm / 4 mm	8	10	In stock	Enquiry
NA-7518908006	Straight reducing connector DN 4, hose 8 mm / 6 mm	8	10	In stock	Enquiry
NA-7518910006	Straight reducing connector DN 4, hose 10 mm / 6 mm	10	10	In stock	Enquiry
NA-7518910008	Straight reducing connector DN 5,6, hose 10 mm / 8 mm	10	10	In stock	Enquiry
NA-7518912008	Straight reducing connector DN 5,6, hose 12 mm / 8 mm	12	10	In stock	Enquiry
NA-7518912010	Straight reducing connector DN 7, hose 12 mm / 10 mm	12	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight reducing connector for hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).