Is the Thermoplastic hose with aramid and synthetic braid 15R CNG suitable for refueling all CNG vehicle tanks and compatible with standard CNG dispensers?

Thermoplastic hose with aramid and synthetic braid 15R CNG Format is designed specifically for refueling CNG vehicle tanks and meets ISO 15500-17, which governs high-pressure hoses for natural gas. Key compatibility and suitability points: - Pressure rating: 350 bar working pressure . sufficient for standard CNG dispensing systems and vehicle tank filling pressures. - Construction: conductive polyamide inner layer plus one or two aramid braids and an additional synthetic braid provide the strength and safety needed for high-pressure fueling. - Temperature range: â40Â°C to +70Â°C . covers typical ambient conditions for vehicle refueling. - Safety features: red microâperforated polyurethane outer layer and conductive inner layer support static dissipation and visual identification; double version with venting hose available for applications requiring venting. - Standards compliance: ISO 15500-17 indicates it conforms to international requirements for CNG refueling hoses, improving likelihood of compatibility with standard dispensers and vehicle inlets. Limitations/considerations: - Physical fittings/end connectors and coupling types must match dispenser and vehicle tank connections; compatibility depends on the specific coupling standard used at the dispenser and vehicle inlet. - Installation, periodic inspection and approved crimping/assembly by qualified personnel are required to ensure safe operation. Conclusion: In general Thermoplastic hose with aramid and synthetic braid 15R CNG Format is suitable for refueling CNG vehicle tanks and is compatible with standard CNG dispensers when fitted with the correct, matching couplings and installed per applicable standards and procedures.

Can the Thermoplastic hose with aramid and synthetic braid 15R CNG be used safely for high-pressure CNG filling in extreme temperatures (-40Â°C to +70Â°C)?

Yes. Thermoplastic hose with aramid and synthetic braid 15R CNG Format is specifically designed for highâpressure CNG filling and meets ISO 15500â17. Its construction (conductive polyamide inner layer, one or two aramid braids plus synthetic braid, and a microâperforated polyurethane outer layer) and rated working pressure of 350 bar make it suitable for vehicle tank filling. The specified operating temperature range (â40 Â°C to +70 Â°C) confirms safe use in extreme cold and hot conditions within those limits. Ensure correct installation, regular inspection, and adherence to applicable safety and maintenance procedures and local regulations.

Does the Thermoplastic hose with aramid and synthetic braid 15R CNG include a venting hose option for safe double-hose fueling?

Yes. The Thermoplastic hose with aramid and synthetic braid 15R CNG Format is available in a double version that includes a venting hose for safe double-hose fueling. The product description explicitly states it is available in a double version with a venting hose, meeting ISO 15500-17 and designed for CNG refuelling (working pressure 350 bar, temperature range â40Â°C to +70Â°C).

Thermoplastic hose with aramid and synthetic braid 15R CNG

All products, Thermoplastic hoses/

Additional information

Material	PA – polyamide
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for natural gas (CNG – Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TO-15RCNG-06	Thermoplastic hose 15RCNG 1/4" (red)	6	350	In stock	Enquiry
TO-15RCNG-10	Thermoplastic hose 15RCNG 3/8" (red)	10	350	In stock	Enquiry
TO-15RCNG-13	Thermoplastic hose 15RCNG 1/2" (red)	12	350	In stock	Enquiry
TO-15RCNG-19	Thermoplastic hose 15RCNG 3/4" (red)	20	350	In stock	Enquiry
TO-15RCNG-25	Thermoplastic hose 15RCNG 1" (red)	25	350	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for natural gas (CNG – Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.