Can Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING be used for filling oxygen or hydrogen cylinders?

No. Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING is explicitly not to be used for explosive gases such as oxygen or hydrogen. Although its odorless inner polyester layer meets FDA 21 CFR, Directive 2011/10/EU and CGA G-7.1-2004 for breathing air, the product description specifically forbids use with explosive gases. Use the hose only for filling non-explosive gas cylinders and install with fittings type Z, observing the stated operating temperature range (â40Â°C to +80Â°C).

Is Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING approved for use with flammable gases other than breathing air?

Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING is intended for filling gas cylinders and its inner layer is compliant with breathing air standards (FDA 21 CFR, Directive 2011/10/EU, CGA G-7.1-2004). However, the description expressly states: "Not to be used for explosive gases, e.g., oxygen, hydrogen." Therefore it is not approved for use with flammable or explosive gases other than breathing air. Use only for breathing air cylinder filling with specified fittings (type Z) and within the listed temperature range.

Can Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING be used for compressed medical breathing air applications?

Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING is suitable for many compressed breathing air cylinder filling applications but with important limitations and precautions. Why it can be used: - The hose is specifically intended for filling gas cylinders and has an odorless inner layer compliant with FDA 21 CFR, Directive 2011/10/EU and CGA Gâ7.1â2004. standards relevant to breathing air quality. - Construction (polyester inner layer, aramid braid reinforcement, microperforated polyurethane outer) and operating temperature range (â40Â°C to +80Â°C) support typical cylinder filling conditions. - Manufacturer specifies use of fittings type Z, which must be followed to ensure proper sealing and safety. Important restrictions and cautions: - Not approved for explosive gases such as oxygen or hydrogen. Do not use for oxygen-enriched systems or where high oxygen concentrations are present. - Compliance statements cover breathing air quality but do not substitute for system-level certification. Ensure the entire filling system (compressor, filters, regulators, fittings, cleaning procedures) meets relevant medical/respiratory breathing-air standards and local regulations. - Verify working pressure ratings, periodic inspection and maintenance schedules, and compatibility with any specific contaminants, lubricants, or sterilization methods used in your medical environment. - Use only specified fittings (type Z) and follow manufacturer installation and testing procedures. Conclusion: Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING may be used for compressed medical breathing air cylinder filling when installed and maintained per manufacturer instructions and system standards, provided oxygen or other explosive gases are not involved and full system compliance is verified.

Thermoplastic hose with aramid braid 120 AIR CYLINDER FILLING

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Hose intended for filling gas cylinders. Odorless inner layer compliant with FDA 21 CFR requirements, Directive 2011/10/EU, and CGA G-7.1-2004 (for breathing air). Not to be used for explosive gases, e.g., oxygen, hydrogen. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TO-120ACF-05	Thermoplastic hose 120ACF 3/16"	5	420	In stock	0 zł		Enquiry
TO-120ACF-06	Thermoplastic hose 120ACF 1/4"	6	420	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose intended for filling gas cylinders. Odorless inner layer compliant with FDA 21 CFR requirements, Directive 2011/10/EU, and CGA G-7.1-2004 (for breathing air). Not to be used for explosive gases, e.g., oxygen, hydrogen. Installation: use fittings type Z. Inner layer: polyester. Reinforcement: aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +80°C.