Is the WEICON Pressure Dispenser for Technical Liquids WSD 400 safe to use with automotive fluids at working pressures between 5 and 10 bar?

Yes. The WEICON Pressure Dispenser for Technical Liquids WSD 400 is designed as a reusable pressure vessel for technical fluids and is equipped with a universal filling valve labeled "automotive," which indicates compatibility with automotive service applications. Its specified working pressure range of 5â10 bar covers the pressures you mention, and its strength rating of 80 bar provides a substantial safety margin against overpressure. With a 400 ml capacity and the automotive-style filling valve, it is suitable for dispensing typical automotive fluids at the stated working pressures, provided you follow the manufacturerâs instructions, use only compatible fluids, and ensure the dispenser and fittings are in good condition before use.

Can the WEICON Pressure Dispenser for Technical Liquids WSD 400 be used to fill different automotive fluids without compatibility issues?

The WEICON Pressure Dispenser for Technical Liquids WSD 400 can be used to fill various automotive fluids thanks to its reusable pressure vessel and universal âautomotiveâ filling valve. However, compatibility depends on the specific fluids: the dispenserâs materials and seals must resist the chemical properties of each fluid (e.g., brake fluid, engine oil, coolant, transmission fluid). The listed specs (400 ml capacity, 5â10 bar working pressure, 80 bar strength) indicate it handles typical filling pressures safely, but to avoid seal or material degradation and contamination between fluids, confirm chemical compatibility with the manufacturer and thoroughly clean or use dedicated units for fluids with differing chemistry.

Can the WEICON Pressure Dispenser for Technical Liquids WSD 400 reliably maintain accuracy when used at varying pressures between 5 and 10 bar?

Yes. The WEICON Pressure Dispenser for Technical Liquids WSD 400 can reliably maintain accuracy when used at varying pressures between 5 and 10 bar, provided it is used within its specified operating parameters and maintained properly. Key points supporting reliability: - Designed working pressure: The unitâs working pressure range is explicitly specified as 5 Ã· 10 bar, meaning it is engineered to perform consistently across that span. - Safety margin and durability: With a strength rating of 80 bar, the dispenser has a substantial safety margin above the working range, reducing risk of deformation or performance drift under normal use. - Purpose-built hardware: As a reusable pressure vessel with a universal âautomotiveâ filling valve, it is intended for repeated pressurized filling and dispensing of technical fluids, which supports consistent metering and operation at the rated pressures. - Practical conditions: Reliable accuracy assumes correct filling, no leaks, intact seals and valve, appropriate fluid viscosity for the application, and regular maintenance. Deviation from these conditions (damaged seals, improper fluid, wear) can affect dispensing accuracy. Conclusion: When operated and maintained according to specifications and used with suitable fluids, the WEICON Pressure Dispenser for Technical Liquids WSD 400 will reliably maintain accurate performance across the 5â10 bar working range.

WEICON dispenser pressure liquids technical WSD 400

All products, Others/

Additional information

Container pressure repeated use for filling fluids technical, equipped in A universal valve filling (“automotive”). capacity: 400 ml. Working pressure: 5 ÷ 10 bar. strength: 80 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
WE-WSD-400	Dozownik pressure fluids technicznych WSD 400 (400 ml)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Container pressure repeated use for filling fluids technical, equipped in A universal valve filling (“automotive”). capacity: 400 ml. Working pressure: 5 ÷ 10 bar. strength: 80 bar.