Steam hose end with GW, steel/galvanized cast iron GF BOSS
BSP and NPT internal threaded fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special GFB adapter with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert that works with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Material: galvanized steel/cast iron. Working pressure: 18 bar (+210°C) – saturated steam. Operating temperature: up to +230°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| DX-GF-04-04-NPT | GF end with GW NPT 1/4", hose 1/4" | 6 | 18 | |
| DX-GF-06-06 | GF end with GW BSP 3/8", hose 3/8" | 10 | 18 | |
| DX-GF-06-06-NPT | GF end with GW NPT 3/8", hose 3/8" | 10 | 18 | |
| DX-GF-08-08 | GF end with GW BSP 1/2", hose 1/2" | 12 | 18 | |
| DX-GF-08-08-NPT | GF end with GW NPT 1/2", hose 1/2" | 12 | 18 | |
| DX-GF-12-12 | GF end with GW BSP 3/4", hose 3/4" | 20 | 18 | |
| DX-GF-12-12-NPT | GF end with GW NPT 3/4", hose 3/4" | 20 | 18 | |
| DX-GF-16-16 | GF end with GW BSP 1", hose 1" | 25 | 18 | |
| DX-GF-16-16-NPT | GF end with GW NPT 1", hose 1" | 25 | 18 | |
| DX-GF-20-20 | GF end with GW BSP 1.1/4", hose 1.1/4" | 32 | 18 | |
| DX-GF-20-20-NPT | GF end with GW NPT 1.1/4", hose 1.1/4" | 32 | 18 | |
| DX-GF-24-24 | GF end with GW BSP 1.1/2", hose 1.1/2" | 38 | 18 | |
| DX-GF-24-24-NPT | GF end with GW NPT 1.1/2", hose 1.1/2" | 38 | 18 | |
| DX-GF-32-32 | GF end with GW BSP 2", hose 2" | 50 | 18 | |
| DX-GF-32-32-NPT | GF end with GW NPT 2", hose 2" | 50 | 18 | |
| DX-GF-40-40 | GF end with GW BSP 2.1/2", hose 2.1/2" | 65 | 18 | |
| DX-GF-40-40-NPT | GF end with GW NPT 2.1/2", hose 2.1/2" | 65 | 18 | |
| DX-GF-48-48 | GF end with GW BSP 3", hose 3" | 75 | 18 | |
| DX-GF-48-48-NPT | GF end with GW NPT 3", hose 3" | 75 | 18 | |
| DX-GF-64-64 | GF end with GW BSP 4", hose 4" | 100 | 18 | |
| DX-GF-64-64-NPT | GF end with GW NPT 4", hose 4" | 100 | 18 | |
| DX-GF-96-96-NPT | GF end with GW NPT 6", hose 6" | 150 | 18 |
BSP and NPT internal threaded fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special GFB adapter with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert that works with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Material: galvanized steel/cast iron. Working pressure: 18 bar (+210°C) – saturated steam. Operating temperature: up to +230°C.
Additional information
| Material | CS – steel (cast iron) |
|---|---|
| Standard length [m] | 60 |
Additional information
| Material | CS – steel (cast iron) |
|---|---|
| Standard length [m] | 60 |
