Can Band-ItÂ® Giant tape, AISI 201 steel be used with alternative clips or only with the separate clips with "noses"?

Band-ItÂ® Giant tape, AISI 201 steel is designed to be used with the separate clips with "noses" supplied for securing the tape end after bending. The standard system relies on forming the roll into bands and fastening with those specific clips; alternative clips are not specified and may not provide the required secure fit, strength or compatibility for heavy-duty applications (hoses >150 mm). For safe, reliable installation-especially under high load-use the recommended clips and the BD-G40299 installation tool.

Does Band-ItÂ® Giant tape, AISI 201 steel require special maintenance after installation with BD-G40299?

No, Band-ItÂ® Giant tape, AISI 201 steel does not require special maintenance after installation with tool BD-G40299 beyond standard good practice. After properly forming the tape into a band (a double loop is recommended) and securing the end with the separate clip/nose, inspect the clamp to ensure correct seating, firm engagement of the clip, and that the band is not twisted or damaged. Routine checks are advisable in heavy-duty applications: periodically inspect for corrosion, deformation, or loosening, especially in aggressive environments or where vibration is present. If corrosion is observed on AISI 201 in a particular environment, consider more frequent inspections or alternative materials. No additional maintenance steps specific to BD-G40299 are required.

Band-It® Giant tape, AISI 201 steel

Q: Is Band-ItÂ® Giant tape, AISI 201 steel suitable for clamping hoses over 150 mm using a double loop and BD-G40299 tool?

Yes. Band-ItÂ® Giant tape, AISI 201 steel Format is suitable for clamping hoses over 150 mm when using a double loop and the BD-G40299 tool. The product description explicitly states the GIANT version is intended for heavy-duty applications for hoses with large diameters (above 150 mm), recommends forming a double loop of tape, and specifies installation using tool BD-G40299. Ensure you also purchase the separate clips with ânosesâ to secure the tape end after bending.

All products, Band clamping system/

Additional information

Material	SS – stainless steel

Band-It® Giant tape, made of AISI 201 steel. The standard is a basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with “noses” must be purchased to secure the end of the tape after bending. The GIANT version is intended for heavy-duty applications (for hoses with large diameters – above 150 mm). Installation using tool BD-G40299. Length: 30.5 m.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-G43099	Non-perforated tape GIANT, width 3/4", AISI 201 - 30.5 m	-	-	In stock	Enquiry
BD-G43199	Non-perforated tape GIANT, width 1", AISI 201 - 30.5 m	-	-	In stock	Enquiry
BD-G43299	Non-perforated tape GIANT, width 1.1/4", AISI 201 - 30.5 m	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Band-It® Giant tape, made of AISI 201 steel. The standard is a basic clamping system using roll tape, formed into bands on hoses of any diameter (a double loop of tape is recommended). Separate clips with “noses” must be purchased to secure the end of the tape after bending. The GIANT version is intended for heavy-duty applications (for hoses with large diameters – above 150 mm). Installation using tool BD-G40299. Length: 30.5 m.