Is the Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 suitable for autoclaving and repeated sterilization cycles without losing sealing or mechanical integrity?

Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 . based on the provided description . is suitable for autoclaving and repeated sterilization cycles without losing sealing or mechanical integrity. Rationale: the body material is UV polysulfone (a polymer known for good thermal stability), sealing uses EPDM O-ring, and the spec explicitly states "Suitable for autoclaving." Operating temperature up to +138Â°C and working pressure up to 8.6 bar indicate it tolerates typical autoclave conditions (steam autoclaves ~121â134Â°C). High mechanical strength and chemical resistance further support repeated-use durability. Cautions: ensure autoclave cycle temperatures and pressures do not exceed the stated limits, verify compatibility of EPDM with your specific sterilization fluids/chemistries, and inspect O-rings periodically for wear; prolonged exposure to higher temperatures or aggressive sterilants (e.g., high-concentration oxidizers) may shorten seal life.

Can the Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 be used with aggressive chemicals without degrading seals?

Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 uses EPDM Oâring seals and UVâresistant polysulfone body. It is described as having high chemical resistance and is intended for chemical installations, but EPDM has limited compatibility with many aggressive chemicals (strong acids, ketones, hydrocarbons, chlorinated solvents, amines). Working range: -40Â°C to +138Â°C and up to 8.6 bar; autoclaveâcompatible. Conclusion: It can be used with many aqueous and mild chemical media, but not with highly aggressive solvents or chemicals that attack EPDM or polysulfone. Verify compatibility for your specific chemical (consult a chemical compatibility chart or manufacturer) before use.

Can the Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 withstand continuous UV exposure without becoming brittle or discolored?

Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7 Format Yes. The socket is made of UV-grade polysulfone and is explicitly described as resistant to ultraviolet radiation, which indicates it was designed to withstand continuous UV exposure without rapid degradation. Polysulfone is a high-performance thermoplastic noted for excellent UV stability, high mechanical strength and chemical resistance; the product description also notes suitability for autoclaving and continuous operation across a wide temperature range (-40Â°C to +138Â°C). Together with EPDM sealing, a working pressure up to 8.6 bar, and stated UV resistance, these properties mean the coupling should not become brittle or significantly discolored under normal continuous UV exposure typical for its intended applications (chemical/photo processes, sprayers, pneumatic systems). Caveats: actual long-term appearance and lifespan under UV depend on exposure intensity (e.g., direct sunlight vs. indoor UV lamps), duration, and environmental factors (ozone, chemicals, temperature cycles). For critical or extreme UV environments, validate with vendor-supplied UV-aging data or perform application-specific testing.

Quick-connection socket with GW BSP, UV polysulfone, HFC series DN 12.7

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Quick-connect socket with internal BSP thread, with and without shut-off valve, resistant to ultraviolet radiation, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Very efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] – total length. Material: UV polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-HFV-05-PSU	HFC socket DN12.7 with 3/4" BSP thread, with valve, UV polysulfone	-	8.6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick-connect socket with internal BSP thread, with and without shut-off valve, resistant to ultraviolet radiation, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Very efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] – total length. Material: UV polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.