Can the TRI-CLAMP end fitting with hose stub, PP/PVDF, series 3C type EM, be used with silicone and TYGONÂ® hoses at 6 bar pressure?

Yes . the KoÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM can be used with silicone and TYGONÂ® hoses at up to 6 bar, provided the following conditions are met: - Hose compatibility: the specific silicone or TYGONÂ® hose must be rated for 6 bar working pressure at the operating temperature and chemical environment. Verify the hose manufacturerâs pressure/temperature charts. - Proper hose fit: the hose inner diameter must match the stub diameter to ensure a secure, leak-free fit. Use appropriate clamps or crimps designed for the hose material. - Gasket choice: the fitting is supplied without a gasket; select a gasket material (EPDM, FKM, GylonÂ®, or PTFE) that is compatible with the conveyed media and operating temperature/pressure. - Installation: ensure correct assembly to the TRI-CLAMP standard (DIN 32676 / ISO 2852 / BS 4825) and tighten clamps to recommended torque to maintain seal integrity at 6 bar. - Media and temperature: confirm chemical compatibility of PP or PVDF with the process media at the operating temperature; elevated temperatures can reduce hose and fitting pressure ratings. If all the above are satisfied, the fitting may be used with silicone and TYGONÂ® hoses at 6 bar.

Is the koÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM suitable for food-grade applications?

KoÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM - based on the provided description - is suitable for many food-grade applications: jest przeznaczona do zastosowaÅ laboratoryjnych, medycznych, farmaceutycznych, chemicznych i spoÅ¼ywczych, speÅnia standardy TRI-CLAMP (DIN 32676, ISO 2852, BS 4825) stosowane w przemyÅle spoÅ¼ywczym oraz jest wykonana z materiaÅÃ³w (PP, PVDF) powszechnie akceptowanych w kontakcie z Å¼ywnoÅciÄ. NaleÅ¼y jednak pamiÄtaÄ, Å¼e dostarczana jest bez uszczelki - wybÃ³r uszczelki (EPDM, FKM, GylonÂ®, PTFE) musi byÄ dobrany pod kÄtem konkretnego medium, temperatury i wymagaÅ higienicznych oraz zgodnoÅci z przepisami dotyczÄcymi kontaktu z Å¼ywnoÅciÄ. Working pressure 6 bar takÅ¼e powinien byÄ weryfikowany wzglÄdem warunkÃ³w procesu.

Does the KoÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM come with a gasket included?

Does the KoÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM come with a gasket included? No. The KoÅcÃ³wka TRI-CLAMP z krÃ³Äcem do wÄÅ¼a, z tworzywa PP, PVDF, seria 3C typ EM is supplied without a gasket; gaskets must be ordered separately and are available in EPDM, FKM, GylonÂ® and PTFE depending on the medium.

Końcówka TRI-CLAMP z króćcem do węża, z tworzywa PP, PVDF, seria 3C typ EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Straight TRI-CLAMP end fitting with hose stub, series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end fitting is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made of EPDM, FKM, Gylon®, and PTFE. The stub is designed for soft rubber and plastic hoses (e.g., TYGON^® hoses, silicone hoses). Material: polypropylene, PVDF. Working pressure: 6 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3C100TT250643PV	TRI-CLAMP end (series 3C) 25 mm, hose 6 mm (3T), PVDF	6	6	In stock	Enquiry
EM-3C100TT250645PP	TRI-CLAMP end (series 3C) 25 mm, hose 8 mm (3T), polypropylene	8	6	In stock	Enquiry
EM-3C100TT250647PV	TRI-CLAMP end (series 3C) 25 mm, hose 9 mm (3T), PVDF	8	6	In stock	Enquiry
EM-3C100TT250648PP	TRI-CLAMP end (series 3C) 25 mm, hose 10 mm (3T), polypropylene	10	6	In stock	Enquiry
EM-3C100TT342048PV	TRI-CLAMP end (series 3C) 34 mm, hose 10 mm (3T), PVDF	10	6	In stock	Enquiry
EM-3C100TT502644PP	TRI-CLAMP end (series 3C) 50.5 mm, hose 7 mm (3T), polypropylene	6	6	In stock	Enquiry
EM-3C100TT502648PV	TRI-CLAMP end (series 3C) 50.5 mm, hose 10 mm (3T), PVDF	10	6	In stock	Enquiry
EM-3C100TT502661PP	TRI-CLAMP end (series 3C) 50.5 mm, hose 25 mm (3T), polypropylene	25	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight TRI-CLAMP end fitting with hose stub, series 3C type EM, finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end fitting is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made of EPDM, FKM, Gylon®, and PTFE. The stub is designed for soft rubber and plastic hoses (e.g., TYGON^® hoses, silicone hoses). Material: polypropylene, PVDF. Working pressure: 6 bar.