What are the chemical and temperature limits for a TRI-CLAMP coupling gasket EPDM, FKM, GylonÂ® and PTFE, series 3C type EM?

Uszczelka zÅÄcza TRI-CLAMP z EPDM, FKM, GylonÂ® i PTFE, seria 3C typ EM . Chemical and Temperature Limits: - EPDM: Good resistance to hot water, steam, many polar solvents and alkaline solutions; poor resistance to hydrocarbons, oils and most organic solvents. Temperature range approximately â40Â°C to +120Â°C (short-term up to ~150Â°C). Not suitable for contact with aromatics, ketones, gasoline. - FKM (Viton): Excellent resistance to oils, fuels, lubricants, many chemicals including acids and hydrocarbons; poor swelling in polar solvents. Temperature range approximately â20Â°C to +200Â°C (continuous up to ~180Â°C, short-term higher). Resistant to aromatics, chlorinated hydrocarbons, and many aggressive media. - GylonÂ® (expanded PTFE composite): Very broad chemical compatibility.resistant to almost all chemicals except molten alkali metals and elemental fluorine at high temperatures. Temperature range approximately â200Â°C to +260Â°C (application limits depend on filler and pressure; continuous use typically up to ~200â260Â°C). Excellent for aggressive acids, solvents and oxidizers. - PTFE: Outstanding chemical inertness.compatible with nearly all chemicals except molten alkali metals and fluorine at high temps. Temperature range approximately â200Â°C to +260Â°C (short-term up to ~300Â°C). Low friction and excellent for corrosive media. Notes: Exact chemical compatibility and usable temperature limits depend on process conditions (pressure, concentration, exposure time, dynamic vs. static sealing) and any fillers or formulations. For critical applications, consult manufacturerâs detailed chemical resistance charts and confirm with material supplier or testing.

What cleaning and sterilization methods are compatible with the TRI-CLAMP coupling gasket EPDM, FKM, GylonÂ® and PTFE, series 3C type EM?

Uszczelka zÅÄcza TRI-CLAMP z EPDM, FKM, GylonÂ® i PTFE, seria 3C typ EM - compatible cleaning and sterilization methods: - EPDM: compatible with hot water, steam (CIP/SIP), alkaline and oxidative cleaners; not resistant to most hydrocarbons and ketones. Avoid strong acids and solvents. - FKM (Viton): resistant to hot water, steam at moderate temperatures, many organic solvents and oils; compatible with common sanitizers; limited resistance to strong bases and some amines. - GylonÂ® (expanded PTFE/filler): excellent chemical resistance; compatible with aggressive acids, bases, solvents, steam and common sterilization methods including autoclave; avoid creep under sustained load at high temp. - PTFE: excellent chemical and thermal resistance; compatible with steam, autoclave, aggressive chemicals and common sterilants; inert to most cleaners. General note: validate compatibility with specific cleaning agents, temperatures and exposure times for each material and application; follow manufacturerâs temperature limits to prevent degradation.

Does the Uszczelka zÅÄcza TRI-CLAMP z EPDM, FKM, GylonÂ® i PTFE, seria 3C typ EM meet FDA and EU food-contact regulations?

Uszczelka zÅÄcza TRI-CLAMP z EPDM, FKM, GylonÂ® i PTFE, seria 3C typ EM: zgodnoÅÄ z przepisami FDA i EU dotyczÄcych kontaktu z Å¼ywnoÅciÄ zaleÅ¼y od uÅ¼ytego materiaÅu i konkretnej formuÅy. - EPDM: standardowe EPDM zwykle nie jest ogÃ³lnie dopuszczone do kontaktu z Å¼ywnoÅciÄ przez FDA ani zgodne z rozporzÄdzeniami EU bez potwierdzenia certyfikatu producenta gwarantujÄcego zgodnoÅÄ z 21 CFR czÄÅÄ 177 (dla gumowych elastomerÃ³w) oraz z odpowiednimi przepisami UE (np. rozporzÄdzenie (EU) 10/2011 lub ogÃ³lne rozporzÄdzenia dotyczÄce materiaÅÃ³w majÄcych kontakt z Å¼ywnoÅciÄ). NaleÅ¼y uzyskaÄ deklaracjÄ zgodnoÅci od dostawcy. - FKM (fluoroelastomer): nie wszystkie formulacje FKM speÅniajÄ wymagania dla kontaktu z Å¼ywnoÅciÄ; niektÃ³re specjalne formulacje sÄ certyfikowane jako zgodne z FDA i przepisami UE. Wymagane sÄ dokumenty producenta potwierdzajÄce zgodnoÅÄ. - GylonÂ® (pÅytki PTFE z dodatkami, marka Garlock): niektÃ³re warianty GylonÂ® sÄ dostÄpne w wersjach zatwierdzonych do kontaktu z Å¼ywnoÅciÄ i posiadajÄ deklaracje zgodnoÅci z FDA oraz przepisami UE; jednak konieczne jest sprawdzenie konkretnego rodzaju GylonÂ® i uzyskanie deklaracji producenta. - PTFE: czysty PTFE czÄsto jest uznawany za zgodny z FDA dla zastosowaÅ z Å¼ywnoÅciÄ (wg 21 CFR dla PTFE jako tworzywa), ale dla zgodnoÅci z przepisami UE rÃ³wnieÅ¼ potrzebna jest odpowiednia deklaracja producenta/dokumentacja. Wniosek: Sama nazwa Uszczelka zÅÄcza TRI-CLAMP z EPDM, FKM, GylonÂ® i PTFE, seria 3C typ EM nie gwarantuje automatycznej zgodnoÅci z FDA i przepisami UE. NaleÅ¼y Å¼ÄdaÄ od dostawcy lub producenta deklaracji zgodnoÅci (Declaration of Conformity) dla konkretnego materiaÅu i partii, zawierajÄcej odniesienia do odpowiednich przepisÃ³w FDA (21 CFR) i aktÃ³w UE (np. rozporzÄdzenie (EU) 10/2011 lub ogÃ³lne rozporzÄdzenia dotyczÄce materiaÅÃ³w kontaktujÄcych z Å¼ywnoÅciÄ), oraz wyniki migracji i testÃ³w, jeÅli wymagane.

Uszczelka złącza TRI-CLAMP z EPDM, FKM, Gylon® i PTFE, seria 3C typ EM

All products, Low-pressure fittings and adapters/

Additional information

TRI-CLAMP coupling gasket series 3C type EM. Material: EPDM, FKM, Gylon® and PTFE.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3C002EP1	TRI-CLAMP gasket (series 3C) 34 mm, EPDM	-	-	In stock	Enquiry
EM-3C002EP2	TRI-CLAMP gasket (series 3C) 50.4 mm, EPDM	-	-	In stock	Enquiry
EM-3C002EP4	TRI-CLAMP gasket (series 3C) 25 mm, EPDM	-	-	In stock	Enquiry
EM-3C002FP1	TRI-CLAMP gasket (series 3C) 34 mm, FKM	-	-	In stock	Enquiry
EM-3C002FP2	TRI-CLAMP gasket (series 3C) 50.4 mm, FKM	-	-	In stock	Enquiry
EM-3C002FP4	TRI-CLAMP gasket (series 3C) 25 mm, FKM	-	-	In stock	Enquiry
EM-3C002GY2	TRI-CLAMP gasket (series 3C) 50.4 mm, Gylon	-	-	In stock	Enquiry
EM-3C002GY4	TRI-CLAMP gasket (series 3C) 25 mm, Gylon	-	-	In stock	Enquiry
EM-3C002PT1	TRI-CLAMP gasket (series 3C) 34 mm, PTFE	-	-	In stock	Enquiry
EM-3C002PT2	TRI-CLAMP gasket (series 3C) 50.4 mm, PTFE	-	-	In stock	Enquiry
EM-3C002PT4	TRI-CLAMP gasket (series 3C) 25 mm, PTFE	-	-	In stock	Enquiry