Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA VB plug for TW (tankwagen) transfer couplings. used for parts MK (female), constitutes a cap resistant na pressure. Material: steel AISI 316. Operating temperature: from -20°C to +65°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type S with a 60° sealing cone, spherical, similar to DIN 7608, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Use a UM type nut (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector plug-in with lock nuts SKV for use in hydraulic systems. Material: steel galvanized. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very light, flexible suction-delivery hose intended for conveying chemical substances. made with thermoplastic vulcanizate TPV – material combining advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows na use go for many substances, among others acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant na conditions atmospheric, aging and ozone. low weight and small radius bending hose ensure ease operation, co can be advantage at transfer with tankers and container. Note: all sizes hose have na branding marking approximate pressure working (WP 10 bar).Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: thermoplastic rubber TPV. Reinforcement: braid polyester, spiral steel. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +23°C : od 12 up to 14 bar - depending on diameter hose. temperature use: from -30°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMicro-actuator single-acting operation (of hidden piston rod) intended for mounting in confined spaces. has ring sealing (O-ring), enabling direct installing in body machines. possible oil-free operation. important! during when actuator works with high frequency recommended is, by piston nie reached limit position. Material: brass nickel-plated (body), steel AISI 303 (piston for Ø6 - Ø10), brass (piston for Ø16), steel nickel-plated (A nut), steel spring (spring), brass (bearing sliding). pressure working: 2÷6 bar. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and very flexible hose o exceptionally high service life in use in pumps peristaltic (LFL - „long flex life”). has high resistance fatigue and exceptional resistance na flaking („spallation” - crumbling particles material hose in result pressure rotor pump). one with best hoses TYGON® for pumps peristaltic - service life 1000 h use (at pressure check 0 bar). resistance na flaking particles eliminates need frequent replacement filter and minimizes risk contaminants substances. is suitable for liquids o high viscosity, sticky and liquids sensitive na shearing. wide used in industry food, cosmetic, pharmaceutical and chemical, in production and laboratories. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF, USP Class VI, international ISO 10993, Japanese #370/1959. possible sterilization steam or oxide ethylene. compliant with REACH and California Proposition 65 - nie contains substances hazardous and banned. length full roll hose 7.5 m (od diameter internal 19 mm - 3 m). pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.17 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for screw-together fittings with a cutting ring, series B. Material: nickel-plated brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple (Adapter) reducing with both a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover spiral intended for securing hoses (cables) against abrasion, impacts and crushing. It also serves to hold a group of hoses (cables) in the molds of a bundle. It improves the visibility of the covered hoses. Resistant to acids, oils, solvents and UV radiation. ABRA to two-color version cover PROTECTOR with tzw. an index wear. Z outside is black, a od the agent yellow. ABRA helps identify space, which require more detailed observation - when only black layer wears through revealing yellow color, will to signal, that spiral can already soon require replacement na new. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal, thick cover with fiber glass. excellent properties insulation thermal and electrical. as cover hoses and cables can be used independently or np. pod cover PYROJACKET or SILICAFLEX, to significantly increase effect insulating. available in two thicknesses wall: 3.2 mm - TSB and 1.6 mm - TSBL. Material: fiber glass. Operating temperature: up to +538°C (momentarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-pressure SG40 water gun for industrial applications. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. The outlet part is terminated with a female 1/4" BSP thread. Housing material: high-strength plastic. Working pressure: up to 350 bar. pressure The permissible: 400 bar. Flow rate: 30 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal gun for air, water and also non-explosive liquids. Intended mainly for blowing out contamination, also in hard-to-reach places. It is characterized by a strong blowing force, with the possibility of adjusting the flow rate. Lightweight construction, ergonomic gun shape and low trigger press force ensure great working comfort. As standard, the gun is equipped with a socket with a 1/4" BSP or 1/4" NPT thread. this model Available is in version with nozzle 90 mm bent, replaceable. wide range additional accessories allows na adjustment for specific requirements applications. Material: POM (body), brass (valve) Sealing: NBR. pressure working: 16 bar. pressure bursting: 64 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA long bottom plate for bolting, for mounting a DIN 3015 standard clamp type 100/101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon, galvanized or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P32 X to basic stationary device for workshops and small plants, with simplified system hydraulic, intended is for performing single lines (production unit). greater od P20 head allows crimping hoses hydraulic for diameter 2". Powered is motor electric occurring in two variants supply: single-phase 230 V o power 1.5 kW and three-phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp adjustable is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 87 mm should order 17 sets jaws standard od FP-32-10 for FP-32-78. The machine P32 X can equip additional in base or Hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial nozzle for water with adjustable nozzle outlet. ring with rubber EPDM secures against damage mechanical. Available in version short. Material: brass. housing: high-strength plastic (acetal). nozzle: 7 mm or 10 mm. Connection: A fitting for hose 3/4" or 1". Working pressure: 16 bar. Flow rate: 75 l/min (6 bar) or 150 l/min (6 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled connector with a BSP female thread type AI 13290 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 18 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple straight DIN 71412 A serving for introduction substances lubricating between cooperating surfaces in order to reduction resistances friction and processes wear. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee socket systemu STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in Tee "T" of couplings push-in for hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee with a thread external NPT, type 101HM, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA KKG gasket for a PERROT lever coupling socket. Material: SBR. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose for cleaning for industry food. high resistance to abrasion and kinking. excellent resistance to oils and fats. Do use in industry food, dairy, etc. Layer inner compliant with FDA 177:2600. Inner layer: black blend rubber NBR. Reinforcement: a synthetic braid. Outer layer: blue rubber Carbryn® secured coating Microban. Working pressure: 20 bar. Operating temperature: od -30°C up to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. Confirmed hose service life of 300.000 pulse cycles. standards: exceeds EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 40 bar to 225 bar depending on the diameter hose. Operating temperature: od -40°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose intended for pressureless (or pod very low pressure) conveying air, water and liquids in use general-industrial, light chemicals (np. diluted acids and bases) and as A guard pipes, lines, cables itp. It can be used (at temperatures up to +40°C) for substances food such as juices, drinks, beer, wine, alcohols with a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose CRISTALLO EXTRA complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: from -20°C to +60°C, working pressure depends on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose with soft polyvinyl chloride (PVC) reinforced spiral with hard PVC (right-handed). intended for discharge dusts, smoke, fibres, extraction contaminants air etc. used also for discharge condensate in installations air conditioning and as A guard lines and cables. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. The hose wall thickness is measured between the spiral. Hose material: grey, soft PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -15°C up to +60°C (podworking pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose o calibrated diameter outer, intended specially for installations pneumatic automotive systems brake. Not contains plasticisers, not stiffens and is resistant to radiation UV. Available only in black. standard: ISO 7628 : 2010 (category 1). Hose material: thermoplastic elastomer (TPE) based on polyester. Working pressure: 10 bar. Operating temperature: od -40°C for + 100°C (for media based on water +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hydrophobic hose delivery made in accordance with technology improvement platinum. free of odour and taste. smooth surface prevents adhesion contaminants. sterilization steam in temperature +135°C, alternatively argon, cobalt. compliant with requirements FDA, USP kl.VI, European Pharmacopoeia 3.1.9 and directives EC 1935/2004 and EC 2023/2006 (GMP). Safety factor 3:1. Inner layer: semi-transparent silicone. Reinforcement: a polyester braid. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols with a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used both for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons), as and for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Available in version antistatic LUISIANA AS - has additional copper cable built-in in Material hose parallel for spiral, PVC, co po connection ends cable for installations and earthing ensures discharge charges electrostatic. version ta Available is on special order, example index version antistatic: e.g. ME-LUISIANA-AS-050. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent yellowish PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size plug quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 1" with a thread external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling plug with a thread external BSP, type F.15, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong two-screw clamp with a double band and a hinged closure for heavy loads. Two screws and solid pins ensure an accurate and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band 20 mm and 24 mm wide. The rolled edges of the bridges prevent damage to the hose surface. The clamp is marked on the band with the minimum and maximum diameter and the material. Screws are tightened with an Allen key. All components are made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-coupling socket cap DNP PVS series. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type BKH L/S with external a thread metric, DIN 2353, intended for high-pressure installations hydraulic. Available as: L (light series), S (heavy series). Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM): from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line or panel mounting. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Valves with pneumatic actuator are available. Available in two pressure versions: with a maximum working pressure of 206 bar and 413 bar respectively. Material the body: steel AISI 316 (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. For the low-pressure version (206 bar), a brass design is available. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (Available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperature / material seal - see chart): up to 206 bar (modified PTFE). Temp. use (dependent od material seal - see chart): from -34°C to +210°C (modified PTFE). connection: BSPT female. notes! The ball valves are designed to work in a completely open or completely closed position. The valves have a factory-adjusted gland seal for a pressure of 70 bar. Due to varied working conditions, periodic adjustment of the seal by means of the stem seal screw may be required (after removing the lever). Initial adjustment before starting the installation is recommended by tightening the seal screw by 1/8 to 1/4 turn.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation. valve secures pressure gauge against overload and stroke pressure during opening and allows its replacement. occurs in two versions: straight – in-line (FPE) and angled 90° (FPEA). has thread under knob, enabling assembly panel. Material: brass nickel-plated (body), steel carbon (needle), steel galvanized (connection - A nut), plastic (knob). sealing: NBR. Connection: 1/4" BSP female (pressure-gauge), 1/4" BSPT male. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA connection set for the system SKILLAIR, series 100, 200, 300 or 400.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling HAMMER LUG type 602 general use (for conveying air, gas, oil). has replaceable a gasket edge (NBR), which reduces vibration flowing medium and constitutes protection for seal (metal/metal) against corrosion. set: part male, female + A nut. color: orange (part male, female), black (A nut). Material: steel chromium-molybdenum 4130. Connection: for welding-in (wall XXH). sealing: metal/metal (cone) + additional gasket edge (NBR). pressure: 6000 PSI (414 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread external compliant with the DIN EN 12713 standard and with a thread external BSP. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling type 1000 intended for connections rigid or flexible lines, everywhere tam, where occurs movement swivel or oscillations between individual parts installation. Material: steel nickel-plated. sealing: PTFE. Operating temperature: up to +200°C. Connection: BSP female, BSP male. rotation: free, swing. Working pressure: from 20 bar to 50 bar (depending on the coupling size).
