Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple hand lever 75/PK silver 500 g. with a hose Ø 11 mm and fitting hydraulic. Material body: steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality sapphire nozzle for high-pressure devices. Maximum working pressure: 3000 bar. Operating temperature: up to +150°C. Tightening torque: max. 25.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer with a throttle the trigger MWSVE with a thread external used in systems compressed air in order to reducing level noise. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Material springs: steel stainless. Operating temperature: from -10°C to +80°C. pressure working: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "T" with BSPT male thread, type B7, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" with BSPT male thread, type C7, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee with a thread internal BSP intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve clamping PSAF for hoses thermoplastic UHP. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm has greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip, and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose A universal intended for air, cold and hot water, oil, liquids hydraulic, light chemicals, diluted acids, liquids cleaning. strong and flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions weather, abrasion and oil. Due to high strength and low extensibility especially recommended for hose reels drum. The hose is non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue (red for diameter 15.9 mm) blend rubber Chemivic® (NBR/PVC). Working pressure: 21 bar. Operating temperature: from -29°C to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, strong and flexible hose made with polyester - polyurethane, free of plasticizers, exceptionally resistant na abrasion and tearing, is characterized flexibility even in low temperatures and withstands cyclic changing temperatures. hose manufactured is in strict tolerances dimensional batch for batch, co ensures safe, repeatable connection with fitting. resistant na oils, greases and fuels and range chemicals. strength na conditions atmospheric and intensive daily use. found use in many branches industry: installations fuel and lubricating, for liquids cooling in automotive, for air in pneumatics and automation industrial, for conveying products abrasive and viscous, sludge and powders and as A guard cables electric. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: tygothane® - polyurethane-polyester (PU). temperature use: from -73°C to +79°C (momentarily up to +93°C). temperature brittleness: -73°C. Hardness: 82° Shore (A). Density: 1.20 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, aldehydes, alcohols industrial and glycols. basic, classic rubber hose chemical. often used in plants industrial and treatment plants for discharge contaminants water and water process. appropriate also for water sea. Layer inner with antistatic (R ≤ 10 6 Ω/m) rubber EPR (other marking: EPM). Reinforcement with high-strength cord. Layer outer with rubber antistatic (R ≤ 10 6 Ω/m) EPR (EPM) resistant na chemicals, abrasion, ozone and conditions atmospheric. Layer inner and outer antistatic. Inner layer: black rubber EPM (EPR). Reinforcement: synthetic cord. Outer layer: black rubber EPM (EPR). pressure working: 10 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose intended for washing cold and warm water and light chemicals. recommended for use in industry food. compliant with the European requirements for substances food 1935/2004 CE and 2007/19/CE (simulant fluids A, B, C). can use fittings combined TR-THERMO-12-BZ130-08-SS and TR-THERMO-12-BZ140-08-SS. Inner layer: grey, smooth PVC. Reinforcement: double polyester braid. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: od -10°C up to +80°C (for 80 bar for +50°).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness, strong and flexible hose intended for discharge sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4, 0.6 and 0.7, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). After effective two-sided earthing of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.0 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Pressure working: from 180 bar to 460 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, lighter od rubber, hose suction-delivery intended for conveying water, sewage, sludge and dry bulk materials. used for systems irrigation, loading and unloading tankers, in installations industrial, etc. retains high flexibility at sub-zero temperatures ambient. smooth inner and outer wall facilitates maintaining hose in cleanliness and increases flow capacity unloading o 20%. is resistant to conditions atmospheric and abrasion. hose Available also in straight, not bent in coil sections 3 for 6 m. Inner layer: black PVC. Reinforcement: a polyester braid, galvanised steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols with a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 7 bar, depending on the diameter hose. Operating temperature: from -10°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement peroxide hydrogen. resistant to radiation UV, oxygen and ozone. Widely used in industry and equipment AGD. sterilization steam, oxide ethylene or radiation. Meets FDA requirements and BfR. Material: semi-transparent silicone. Hardness: 57° Shore (A). Density: 1.15 g/cm³. Operating temperature: od -50°C up to +200°C (momentarily +220°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. For dimension group 0 there is one bolt hole, for dimension groups 1 ÷ 6 there are two bolt holes. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: self-extinguishing polyamide. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug 90° WEO with fittings for hose for use in hydraulic systems where there is not enough space, to install line in the traditional way. Po connection plug has freedom of movement in the socket, co zapobiega screwing lines in trakcie installation. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for a hose size up to 3/4"), 250 bar (for a hose size 1"). Material: case-hardened steel. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 116 quick-coupling plug with a male thread without a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1500 bar (coupling connected). Burst pressure: 3000 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 1/2" with a thread external, for a spray gun Heavy Duty. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe LS 3 foam generator for pressure devices, intended for touchless washing. A 1 l polyethylene tank is equipped with a brass injector for generating foam. Diameter nozzle: 1.25 mm. Working pressure: 180 bar. max. Flow rate: 20 l/min. Operating temperature: +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality two-way SKH ball valve with a female BSP thread, intended for high-pressure hydraulic and industrial installations. in order to correct selection valve for media other than oil hydraulic and for high temperatures should consult with Tubes International. Working pressure dependent od material sealing valve. Material: steel (body, ball, stem). Seals: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (POM); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling low-pressure HAMMER LUG type 100 for general applications. widely used for conveying air, water, oil and gas. set: part male, female + A nut. color: yellow (part male, female), black (A nut). Material: steel carbon A105. Connection: NPT female. sealing: metal/metal (cone). pressure: 1000 PSI (69 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread trapezoidal external compliant with the DIN EN 12713 standard and with a thread internal. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket-and-plug coupling STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized. sealing: NBR (O-ring), teflon (ring oporowy).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with a thread internal, type R2, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSP male and female thread, type A4/Z, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 30 mm for valves PIV.B. Insulation class: F180. Voltage tolerance: -10% for +15%. Protection degree: IP65 EN60529 with a connector.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of AISI 316 stainless steelL with a thread external. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling dry-break DRY-MATE with a thread internal of AISI 316 stainless steel. Used in the chemical, pharmaceutical industry, agriculture and transfer systems. Nie is intended for media gas. Installed on the hose side (hose part). The socket design is based on a ball valve, which ensures a completely unobstructed flow. The socket is supplied complete with polypropylene caps. Coupling material: body - steel AISI 316, latch CAMLOCK - steel AISI 316. Sealing: valve - PTFE, coupling - Viton (Available EPDM and kalrez). pressure working: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose delivery, flat-folding, for water for hydrants and equipment being on equipment services firefighting. supplied with mounted couplings with aluminum type STORZ (complete line), compliant with conditions technical regulation MSWiA with 27.04.2010 r., has certificate approvals CNBOP-PIB. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). can serve for conveying water, water sea, water industrial, solutions some substances chemical. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: od 12 bar for 15 ba - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting for hose 90° with a thread 11/16″-18 UNF enabling connection fitting for socket type 2HG or 2HL quick coupling Hansen Beverage. pressure working: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic fitting (type P - with a special "tail" for a thermoplastic hose) with a thread external NPTF, sealing on the thread using tape PTFE or sealant in flows (AGN). Intended for crimping in UHP thermoplastic hoses by means of a clamping ferrule appropriate for the hose type. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight ORFS INTERLOCK with UNF female thread, flat sealing, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Hose fitting, NiTO type A with a BSP male thread with a flat seal. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
