Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with a MAN L pressure gauge, terminated with push-in connections on both sides (hose - hose). The pressure gauge, built into a metal housing, ensures an accurate reading despite its small size. It can be turned in any direction by hand. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling with male thread and protective spring, for hoses made of soft plastics. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling reducing for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on 90° angled coupling with female thread, type C5/F, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter consists ofcy additional equipment valves shut-off type FPE and FPEA. Working pressure: 350 bar. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSP female thread, type A6, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA box distribution air for system SPEEDFIT. W a set is found two plugs 1/2″. Material: aluminum. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible rubber nozzle for compressed air, intended for fast removing with surfaces all contamination. adjustment flow through bend nozzle. perfectly works in situations, in which we have for dealing with delicate surface, exposed na damage through direct contact. depending on connections we distinguish nozzle ending in fitting for hose o diameter 6 mm and 9 mm or a plug EUROSTANDARD 7.2. diameter hole nozzle: 2 mm. flow nominal: 200 l/min at a pressure of 6 bar. pressure Maximum: 10 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunction, light, exceptionally pliable and flexible hose resistant to oil and gasoline. intended for air, water, oils, fuels, greases, chemicals (np. light acids and bases), pesticides, fertilisers itp. smooth Layer outer resistant to conditions atmospheric, aging, ozone, radiation UV, non-staining. popular and Widely used in industry, construction, agriculture, workshops automotive. Inner layer: black blend NBR/PU/PVC. Reinforcement: a polyester braid. Outer layer: black blend NBR/PVC. Working pressure: 25 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size socket bulkhead quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. The characteristic design (it does not contain balls and a locking sleeve) allows easier, secure one-hand connection and disconnection. An audible click signals a successful connection. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 3/4" with a hose end and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils). For the valve, an EPDM O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble straight BANJO fitting type DRS, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for grease nipples type DIN 71412 A, DIN7 1412 B and DIN 71412 C with a female metric thread. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic fitting (type P - with a special "tail" for a thermoplastic hose) with a thread internal metric, O-ring sealing on a 24° cone (DKOS), series heavy. Intended for crimping in UHP thermoplastic hoses by means of a clamping ferrule appropriate for the hose type. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 45° INTERLOCK SAE 6000, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting plug-in SKV with a nut lock with tail type INTERLOCK intended for hoses hydraulic type 4SH, R13, R15 (in rozmiarach 3/4" ÷ 1.1/2"). sealing: NBR. Material: steel galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug hexagonal with a thread external NPT, BSP, BSPT, UNF and UN, for connector threaded intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. plug with a thread UNF and UN fitted is in a gasket O-ring. Material: steel AISI 316. gasket: O-ring FKM 90.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple for welding-on with a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal cover in the molds rolls or shorter sheets designed for protection hoses, cables other element against splashes metals, intense radiating heat, flames and splashes welding. high content pure silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. Nie emits fumes ani fumes. available in three versions, in rolls o wide 915 mm and 1525 mm: SILICAFLEX BLANKET 18 – o wall thickness 0.76 mm, SILICAFLEX BLANKET 32 – o wall thickness 1.25 mm, SILICAFLEX BLANKET 36 – o wall thickness 1.27 mm. Available is also special version SILICAFLEX BLANKET coated aluminum coating reflective (FQSFB36-36AL). aluminum SILICAFLEX BLANKET except for features standard cover SILICAFLEX and reflecting intensely radiating heat, has also better strength na tearing and na abrasion, a also better resistance na water and oils. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing identification white (gases) for socket quick coupling Hansen Beverage. Material: plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AKBO HEAVY DUTY water gun of AISI 316 steel, with a rubber handle and an insulated trigger tongue. It is not intended for steam. Body material: AISI 316 steel. Trigger tongue and pusher material: stainless steel. Linings of ethylene-propylene rubber (EPDM). sealing: Viton. Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon or steel AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn MB cover, without a chain, for TW transfer couplings. Used for the VK (male) part, it constitutes a pressure-resistant cap. Material: brass. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). gasket type TWF, Material the gasket: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press TUBOMATIC H25 with manual drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO connector with a BSP male thread type AI 13550 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose latest generation specially designed according to high requirements industry processing beer. intended is for conveying high quality beer raw, beer pasteurised and beer organic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, aging and conditions atmospheric. tested and approved for conveying beer through Technical University WEIHENSTEPHAN in Munich – not causes changes taste beer. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73, 3-A n. 18-03-Class II. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber CR. Working pressure: 10 bar. Operating temperature: -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnion with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. sealing flat between internal element. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer dynamic MWSPL with a thread external used in systems compressed air in order to reducing level noise. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 30 dB. Material: black resin acetal, insulation acoustic. Operating temperature: from -10°C to +60°C. pressure working: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "L" with BSPT male thread, type B8, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "L" with BSPT male thread, type C8, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible hose intended for compressed air. Due to such features as: lightness, flexibility in low temperatures, resistance to elongation is especially recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. temperatures use: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, extremely pliable and flexible hose intended for discharge dust, dust, contaminants air, fumes, vapours etc. thanks to unique the structure with longitudinal and transverse reinforcement fibres synthetic and of spiral steel is characterized very small radius bends, resistance on kinking and exceptional resistance on stretching. durable and reliable, commonly used in systems vacuum cleaners industrial and domestic, in works construction for purification and drying and as hose cover. Not contains cadmium in accordance with BGR 132. discharge charges electric through earthing spiral steel. left-handed spiral reinforcing allows screwing on appropriate ends for vacuum cleaners with a left-hand thread (ends PVC for hose SUPERELASTIC or other appropriate). possible is also Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Hose material: two layer soft PVC reinforced fiber. Reinforcement: steel spiral coated PVC. Operating temperature: od 0°C up to +85°C (working pressure depends on temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 1SN, ISO 1436-1SN/R1AT, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled hose cover reinforced vulcanized a braid synthetic. Material layer external: black rubber SBR. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose for air, gases, water and other media. used in systems in which available danger accumulation charges electric and in zones hazard explosion. compliant with the directive ATEX (2014/34/UE). resistance surface R 6 Ω. resistant to hydrolysis, microorganisms, abrasion and radiation UV. The calibrated outer diameter allows use with push-in connectors. recommended for applications in industry electronic, painting powder, zones hazard explosion, mining, conveyors and sorters parts. pressure working given at factor safety 2:1 relative to maximum pressure not causing damage hose. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on the diameter hose). Operating temperature: od -30°C up to +80°C. Vacuum: for 0.95 bar (at vacuum should increase radius bends o 20%).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery, intended for conveying aggressive substances chemical, solvents and concentrated chemicals, characterized by high strength thermal and mechanical and highest cleanliness layer internal. Layer inner with white polymer perfluoroalkoxy MFA (polymer fluorine o properties close for PTFE), mirror smooth (prevents deposition medium na walls and is easy in maintaining cleanliness), free of smell and taste, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic, spiral with wire steel. outer Layer with rubber EPDM, antistatic (R 6 Ω ), resistant na abrasion, ozone and conditions atmospheric. hose is characterized excellent resistance chemical and cleanliness MFA, impermeability, resistance na temperature, oxidation and stresses mechanical. wide used in industry chemical of regard na total resistance na operation greater substances chemical. appropriate for conveying concentrated acids and alkalis (acid sulfuric, hydrochloric, phosphoric, nitric, lye sodium, potassium itp.). resistant na rigorous conditions cleaning method Cleaning-in-Place (CIP). Na special order version M according to EN 12115 with built-in two cables copper ensuring discharge charges electrical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω). industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550 (e-and); ISO 10993. Nie contains plasticizers, phthalates ani substances origin animal. assembly: should use fitting with a spigot ("tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with MFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white polymer MFA. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: 16 bar. temperature use: from -50°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInsert filter "F" and "FR" for series NEW DEAL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NiTO of AISI 316 stainless steelL with fitting for hose. Available in two systems: 1/2″ and 3/4″. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK FW for welding (butt welding) made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
