Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector socket with hose end, type F.7, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / Details90° NON SKIVE end with internal metric thread, with sealing on a 24° cone, o-ring (DKOS 90), heavy series, designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight INTERLOCK end with internal metric thread, 24° cone with O-ring, heavy series, for hose type 4SH, R13, and R15. Material: carbon steel, galvanization.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type B with external BSPT thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle body of the BANJO connector with a type D5 socket connection, intended for hoses made of soft plastics. The connection is made by inserting the hose onto the fitting and tightening it by screwing on the nut. The angle body of the BANJO connector allows for positioning the connector in the desired orientation. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCND connector corrugated intended for rubber hoses and industrial plastic hoses made of galvanized steel. Designed for assembly using straps or clamps. For multiple assembly and disassembly. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass angle connector type AI 13260 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal industrial pressure gauge 63 mm with rear connection FM 632, manufactured according to standard EN 837-1 in a stainless steel housing with glycerin filling. The gauge is resistant to shocks, vibrations, humidity, with increased resistance to sudden pressure spikes, intended for simple measurements of low-viscosity liquids, vapors, and gases that do not corrode copper alloys and do not crystallize. The glycerin filling of the gauge helps reduce pointer fluctuations and minimizes wear on moving parts of the mechanism during pressure pulsations and vibrations. Additionally, it prevents condensation and the formation of a corrosive atmosphere inside the pressure gauge, which could damage internal components. The measurement range should be selected according to the working pressure, ensuring that constant or slowly changing pressure does not exceed 75% of the range; pulsating pressure does not exceed 60% of the range, and pressure impulses do not exceed the maximum range. Dial diameter: 63 mm. Material: housing - AISI 304 steel, window - plexiglass, connection - brass, mechanism - brass and copper alloys, filling - glycerin. Accuracy class: 1.6. Ambient temperature: from -40°C to +65°C. Medium temperature: maximum +60°C. Rear connection: GZ 1/4" BSP (G 1/4 B, EN ISO 228-1, B indicates thread tolerance).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pressure gauge mounted to reducers of types SYNTESI, BIT, SKILLAIR, and NEW DEAL with a square dial. The measurement range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range. Scale expressed in bars and PSI. Size: 1/8". Operating temperature: up to +50°C. Dial diameter: 40x40 mm. Measurement range: 0 ÷ 4 or 0 ÷ 12 bar. Housing material: plastic. Dial material: aluminum. Filling: none (dry gauge).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel coupling type 62300 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 101 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. A clamp with a smooth surface for hoses and hoses is also available, marked with the letter H at the end of the index. For size group 0, there is one hexagon head screw, and for size groups 1 to 6, there are two hexagon head screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. The selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: green polypropylene. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp according to DIN 20039 B, with hooks ("claws") and separate pressure pads ("tongues"), made of high-quality ductile cast iron galvanized (with yellow passivation free from hexavalent chromium). Designed for securing hoses, with a connection to the hose part featuring a locking mechanism. Indices marked with the letters "FL" are intended for flat hoses. Material: galvanized ductile cast iron. With proper installation, appropriately selected hose, and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp designed for securing hoses on standard ends (smooth) with a securing flange. Material: clamps - aluminum, screws and nuts - galvanized carbon steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp equipped with a rubber seal for hose installation with a safety cord of the STOPFLEX® system. The clamp does not come with a cord, which must be ordered separately.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel sealing ring with an octagonal cross-section type R designed for connecting and sealing specially machined flanges with a groove. The octagonal cross-section ring provides greater sealing integrity than an oval cross-section ring. Used in connections for high pressures and temperatures. Detailed information on the dimensions of the ring is attached. Material: carbon steel. Working pressure: up to 700 bar. Operating temperature: from -40°C to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, featuring an external connection thread M12x1.25. Other nozzles can be installed instead of the standard nozzle – see EWO gun accessories. Depending on the connection, the gun is available with a EUROSTANDARD 7.2 plug or a hose end with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (forging). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMULTICLEAN gun with flow rate adjustment and trigger with safety. Solid brass construction. Particularly recommended for CNC machines for coolant and for washing parts. Standard nozzle in the gun Ø 2 mm. Working pressure: up to 40 bar. Operating temperature: from +5°C to +90°C. Weight: approx. 1050 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum gun with a 360° rotating nozzle Ø 3 mm, with flow rate adjustment. Utilizes vacuum to draw low-viscosity fluid from the tank. Tank: plastic with a capacity of 0.7 l. Nozzle diameter: 3 mm. Maximum pressure: 10 bar. Operating pressure: 2 to 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 APZ press with pneumatic drive for hydraulic pump intended for repair workshops, service points, etc. The hydraulic pump drive is connected via a hose, 4 meters long. The press is adapted for use with interchangeable jaw sets (ordered separately). It features an electric (battery-operated) indicator for achieving the clamping diameter. For a clamping diameter range, e.g., from 10 to 45 mm, 8 sets of standard jaws should be ordered from FP-16-10 to FP-16-31, where the largest clamping diameter is achieved with the main jaws, which have a range of 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProduced from high-quality ether-based raw material, maintaining flexibility over a long period, a spiral hose suitable for operation in harsh industrial conditions. It has shape memory, ensuring that after many years of use, the coil diameter remains unchanged. Excellent for applications requiring hoses resistant to abrasion, brittleness, and adverse weather conditions. Equipped with swivel couplings to eliminate longitudinal stresses in the hoses during use. Finished on both ends with straight sections of 100 mm and 500 mm, and ends reinforced with a quick coupling and a 26KA plug, with a reinforcing spring. The working length is 80-90% of the total length of the hose. Hose material: light blue polyurethane PUR. Working pressure: up to 12 bar (depending on hose diameter). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP button with VRM-065 R lock for VME valve. Color: red. VME1-000 Adapter required for installation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° push-in connector for hose with external BSPT or metric thread. For use in lubrication technology. Recommended material for connected hoses is polyamide. Body material: nickel-plated brass. Sealing material: o-ring (HNBR). Operating temperature: from -30°C to +150°C. Maximum working pressure: 150 bar (for liquids), 30 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal insulation made from specially cleaned fiberglass braid through heating and saturation with a special acrylic substance. It does not have loose, falling fibers, lays well, and is relatively abrasion-resistant. It can be expanded and contracted by 25% to fit the desired diameter. Material: fiberglass. Operating temperature: up to +538°C (temporarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRoll for bending metric hydraulic pipes with external diameters of 6, 8, 10, 12, 14, 15, 16, 18, 20, 22, 25, 28, 30, 32, 35, 38, and 42 mm intended for devices: CM42, CMS42, C42, MINI CENTER, and CENTER JUNIOR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless precision metric tube made of cold-rolled austenitic stainless steel. The specified working pressure is the theoretical pressure according to EN 13480-3. Compliant with standards: EN 10216-5 TC1, ASTM A213-AW, ASTM A269, PED 97/23/EC, NACE MR0175/ISO 15156. Material: EN 1.4435, ASTM TP 316L. Dimensions and tolerances according to EN 10305-01. Standard tube length (one section): 6 m (shipping in sections of 1 m, 2 m, or longer upon agreement of transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped "T" fitting with internal BSP thread type A11 designed for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINE SPIRAL+ is an antistatic version of the PROTECTOR cover with added components that reduce flammability and ignition potential, especially in mining applications and machinery used in mines. It has MSHA IC-271 approval issued by the Mine Safety and Health Administration as a flame-resistant product, permitted for use in mines. Flammability class according to UL 94 V-0 (flammability safety standard for plastic materials). Material: brown-gray polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type clamp sleeve used for securing hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick-connect ends. Low-pressure hoses (up to approx. 30 bar depending on diameter) made from various materials can be used with clamp sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with steel braiding (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLDR, LD, LR type sleeves are designed for clamping hygienic stainless steel ends (with a corrugated tail) type NH-xxK-xxx and ends with a tail for hose under a shell clamp RS, e.g., TW-KRS-xxx, NH-xxR-xxx in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L may be slightly (a few mm) greater than the length of the tail of the end Lk. LR sleeves - only for ends under the shell clamp, LD - only for ends with a corrugated tail, LDR - sleeves for both types of ends. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft, and flexible hose for laboratory and food applications. Ideal for analytical devices, condensers, incubators, desiccators, as gas and drainage lines. Suitable for food and biopharmaceutical products. Also commonly used for cooling computer processors. The glassy smooth, pore-free inner surface prevents the deposition and adherence of contaminants inside the hose and facilitates cleaning. Complete repeatability of hose parameters across all batches. Can be used with peristaltic pumps, but lifespan is limited. The hose is free from phthalates and BPA (Bisphenol A). Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. Sterilization possible by steam, ethylene oxide, or radiation. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full roll length of the hose is 15 m. Available VACUUM version with thicker walls for vacuum applications. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality BARRIER type refrigerant hose (thick-walled) designed for automotive and industrial cooling and air conditioning systems operating on R134a, R12, R404a Suva MP52, and R22 refrigerants with mineral and synthetic oils PAG, POE, and PVE. The outer layer is resistant to oil, abrasion, and weather conditions. Standards: SAE J2064 type C class II. Inner layer: black CR rubber, nylon (PA) layer. Reinforcement: two polyester braids. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on hose diameter. Operating temperature: from -30°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose designed for washing with cold and hot water as well as light chemicals. The outer layer is resistant to animal and vegetable fats. Recommended for use in the food industry. Compliant with European regulations for food substances 1935/2004 EC and 2007/19/EC (simulated fluids A, B, C). Use crimped fittings for THERMOCLEAN hoses. Inner layer: white, smooth PVC. Reinforcement: polyester cord. Outer layer: blue, smooth PVC. Working pressure: from 26 bar to 30 bar (depending on hose diameter). Operating temperature: from -15°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction-discharge hose made of PVC intended for water and sewage. Smooth inner wall, slightly corrugated on the outside. Good resistance to external impacts and harsher operating conditions. Flexible at low temperatures. Used in irrigation systems, tankers, and vacuum trucks, for sewer cleaning and septic tank emptying. Hose material: green PVC. Reinforcement: hard PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the hose diameter and temperature. Operating temperature: from -25°C to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTeflon hose with steel braid and external clear polyurethane coating intended for brake systems, hydraulic systems, and suspensions. Resistant to high temperatures and aggressive chemical substances, brake fluid DOT3 and DOT4 (the outer surface is also resistant to the mentioned substances). The hose can also be used in brake systems equipped with ABS - reduces pulsation effect. Manufactured according to SAE J1401 standard. Inner layer: PTFE. Reinforcement: single steel braid. Outer layer: high abrasion-resistant polyurethane. Working pressure: 210 bar. Operating temperature: from -40°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium thickness flexible hose with reinforcing spiral, designed for suction and transport of bulk abrasive materials, granules, chips, shavings, etc. Used in various industrial sectors, particularly often employed for the removal of solid particles in the plastics, wood, construction materials, and metal industries. Flexible and elastic, even at low temperatures. Smooth inside, low compressibility. Dense and thick steel spiral coated with white PVC ensures high pressure parameters, is corrosion-resistant, and has good adhesion to the hose material. Hose with good abrasion resistance, also resistant to oils and gasoline. Installation on couplings with bridge clamps (right-handed). Other diameters may be available on special order. Versions: P3 PU – standard version, made of polyester-polyurethane, highly abrasion-resistant; P3 PU AS – antistatic version (R ≤108 Ω), compliant with TRBS 2153 and for suction also with TRGS 727, made of polyether-polyurethane, with good abrasion resistance, resistant to microbes and hydrolysis; P3 PU EL – electrically conductive version (R ≤104 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for suction also with TRGS 727, can be used in explosion hazard zones after risk assessment, made of black polyether-polyurethane, with good abrasion resistance, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on hose diameter). Reinforcement: spiral made of steel wire coated with white PVC. Operating temperature: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and lightweight polyamide hose, intended for pneumatic, oil, fuel, and hydraulic installations, resistant to chemicals and lubricants. It has a calibrated outer diameter, allowing for the use of plug couplings, which significantly shortens and facilitates its installation. Compliant with DIN 73378 standard. Available in colors: yellow, orange, red, blue, green, natural, and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -55°C to +100°C (for water-based media +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible welding hose for oxygen made according to ISO 3821 standards. It is characterized by resistance to kinks and weather conditions. Not recommended for gases produced from fuels, oils, and LPG gas. Inner layer: black SBR/NR rubber. Reinforcement: synthetic braid. Outer layer: blue smooth SBR/NR rubber. Working pressure: 20 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, lightweight, highly flexible suction and discharge hose designed for general industrial applications for water and light chemicals, other liquids (excluding fats, oils, and hydrocarbons). It can also be used for air, vacuum transfer of dust and powders – abrasion resistance and potential static electricity issues should be considered. It can be used (at temperatures up to +40°C) for liquid and semi-liquid food products such as juices, beverages, beer, wine, alcohols up to 50% concentration, milk, and dairy products. It is not recommended for oils and fatty food substances. The reinforcement with a steel wire spiral embedded in a soft PVC wall provides good resistance to vacuum and hose collapse. The transparent wall allows for easy visual monitoring of flow. As a hose reinforced only with a steel spiral (without a braid), it exhibits some elongation under pressure, which should be taken into account in applications, especially at elevated temperatures. The METALFLEX PVC hose complies with European regulations 1935/2004/EC, 10/2011/EU (simulants A, B, C, and D1), 2023/2006/EC (GMP), and FDA CFR 21 175.300 and 175.1210. It is suitable for temporary contact with food during the transfer of food substances - under the conditions specified in the manufacturer's declaration of conformity (available from Tubes International). Hose material: transparent, soft PVC. Reinforcement: galvanized steel spiral. Working pressure for a temperature of 20°C: from 1 bar to 9 bar - depending on the hose diameter. As the operating temperature increases, the working pressure value of the hose decreases. Operating temperature: from -10°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe version of the HYPERLINE hose without a braid (Tube Only) is externally spiral corrugated (right-handed) and internally smooth. The hose combines the advantages of a flexible corrugated hose and a smooth-walled hose with undisturbed flow. The standard version is made of natural, semi-transparent PTFE, allowing for visual flow monitoring. The antistatic AS version made of carbon-filled Teflon (black) ensures the dissipation and dispersion of electric charges for substances and conditions at risk of static electricity. The hose material meets FDA requirements (21 CFR 177.1550 for the standard hose, 21 CFR 178.3297 for the antistatic version). It is flame-retardant (UL94 V-0) and has a high oxygen index (LOI). It can be used for the transfer of chemicals, foodstuffs, fuels, oils, paints, solvents, adhesives, dyes, and detergents under very low pressure conditions. Ends can be fitted with crimped stainless steel tube sleeves. The relationship between working pressure and temperature for the HYPERLINE FX Teflon hose without a braid applies only up to a temperature of 150°C. Above this temperature, there is a decrease in working pressure and vacuum. If the hose is to be used above these temperatures, this must be taken into account, and appropriate tests should be conducted under operating conditions. Available versions: standard and antistatic. Hose material: PTFE (Teflon). Operating temperature: from -70°C to +150°C (up to +260°C - working pressure of the hose dependent on temperature).
