Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE SB (HYDRAFLON) hose features an inner layer made of high-quality seamless PTFE, ensuring minimal porosity, maximum flexibility, and resistance to vibrations. The braid is made from heat-treated AISI 304 stainless steel wire with a tensile strength of 1700 MPa. It is used for the transmission of chemicals, food substances, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam, etc. - as well as for classic high-pressure hydraulic oil installations. The HYPERLINE SB hose is a version of the SMOOTHBORE hose with a medium wall thickness and an internal diameter adapted to standard hydraulic fittings; installation is done using standard straight clamp jaws. In cases where static electricity hazards are identified (risk of charge generation and accumulation), HYPERLINE SB hoses in the antistatic AS version should be used. The antistatic Teflon in the AS version is black (contains appropriately dispersed graphite in PTFE) and has a resistance R <10^8 Ω (according to ISO 8031 annex A). This ensures the dissipation and dispersion of electric charges. At operating temperatures above +130°C, the maximum working pressure should be reduced by 0.75% for each 1°C increase in temperature. The value "Wall thickness [mm]" provided in the Technical Data refers to the PTFE layer. Hose material: smooth PTFE (Teflon). Reinforcement: single braid of AISI 304 steel. Working pressure: from 80 bar to 350 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for cleaning and washing installations and machines in the food industry with steam and hot water. The inner layer meets FDA 21 CFR 177.2600 and BfR XXI category 2 requirements. The outer layer is resistant to vegetable and animal fats. High-quality hose, commonly used for cleaning and washing with hot water or steam in the food industry (e.g., dairies, meat industry). Note: the hose should not be used simultaneously for water and steam. For steam, use special screw-on fittings designed for steam. To extend the lifespan, the hose should be emptied of steam after use to avoid condensation buildup. Standard roll length: 60 m (or 120 m - contact Tubes International). Inner layer: white butyl rubber. Reinforcement: synthetic cord. Outer layer: blue NBR/PVC rubber. Working pressure: 6 bar (10 bar - for water). Safety factor: 10:1 (3:1 - for water). Operating temperature: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for hot water pressure washing equipment. Inner layer resistant to detergents, outer layer resistant to abrasion, oils, ozone, and weather conditions. Standards: ISO 1307. Inner layer: black synthetic rubber. Reinforcement: single steel braid or double steel braid. Outer layer: black or blue synthetic rubber (micro-perforated). Working pressure: 250 bar or 400 bar, depending on the type of hose. Operating temperature: from -40°C to +120°C or from -40°C to +150°C, depending on the type of hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector plug with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with a weldable connection for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: AISI 316 steel. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug PERROT with a flared end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar (up to 8 bar for size 216 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong screw clamp with a hinged closure for heavy loads features a durable construction and two full pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made from high-quality steel band with a width ranging from 18 mm to 26 mm. The rolled edges of the band prevent damage to the surface of the hose on which the clamp operates. The clamp has markings on the band indicating the minimum and maximum diameter as well as the material from which it is made. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be utilized. Material: all components made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHeat shrink end caps are designed to protect the hose after prior cleaning. They eliminate the possibility of re-contaminating the hose, which is problematic and occurs with traditional methods (ill-fitting plastic plugs or caps inserted or screwed into the ends can leave particles generated by shearing the material with the thread). Heat shrink end caps leave no contaminants behind. As long as they are on the ends of the previously cleaned hose, we are guaranteed that it remains clean. Removing such a cap involves pulling the black strip (located along the cap) towards the end of the hose. The caps are for single use only and cannot be reused.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVODE valves are used in hydraulic systems as a controlling and blocking element for double-acting actuators. They allow for smooth descent of the actuator under load. The opening pressure value is set using screws (adjustment with an Allen key, locked with a counter nut). The set value must be 30% higher than the pressure value resulting from the load of the receiver. The standard opening pressure of check valves is 0.5 bar. The valves are equipped with mounting holes. Material: galvanized steel (body), galvanized steel (valve). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with internal BSP thread, intended for high-pressure hydraulic and industrial installations. For proper selection of the valve for media other than hydraulic oil and for high operating temperatures, consultation with Tubes International is required. Material: stainless steel AISI 316Ti (body, ball, stem). Seals: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (POM); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. It features a compact design with a relatively high flow rate. Version with a regulating stem. Each valve is factory tested. The valve has a special design allowing for panel mounting without the need to disassemble the needle, thus preserving the Manufacturer's warranty. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing sealing: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with both ends fitted with plug couplings (hose - hose), silenced discharge using an integrated silencer. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FPM valve limits the maximum pressure in the system. It allows free flow of hydraulic fluid between the P connections. When the pressure exceeds the set value, the T path opens and excess oil drains into the tank. The maximum pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). Special attention should be paid not to set the pressure value higher than 250 bar (max. working pressure for the valve body). Material: aluminum (body), galvanized steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFPR type check valve designed for high-pressure hydraulic and industrial installations. It closes the flow of medium in one direction and opens free flow of medium in the opposite direction. Standard opening pressure: 0.5 bar (also available in 2.5, 5, and 10 bar). Permissible flow direction A → A1. Material: AISI 316 steel (body), AISI 316 steel (stem). Sealing: FKM. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and CAMLOCK A (plug) connection. The trapezoidal threads standardly equipped in IBC connectors are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLoading connection socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: AISI 316 steel. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4" type TWO): hypalon. Thread sealing (seal type GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing fitting with external BSPT thread and internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connection with external BSPT thread type B5 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket connector with external thread type C1/Z designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality 90° angled connection with external parallel thread (BSP or M5), made entirely of AISI 316L stainless steel, series 60115. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with external cylindrical thread, series F type R 1 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel plating through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Material: nickel-plated brass. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external thread, type R1, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction adapter made of stainless steel type 62040 with external BSPT thread and internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 22 mm for valves of series 70 with sizes 1/8" and 1/4", plunger O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 DIN 40050 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally closed (NC) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection class: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery simple, manual device for bending hydraulic pipes with external diameters ranging from 6 to 18 mm, intended for small workshops. Includes bending rollers and a durable metal case. The device is designed for mounting in a vice (vice not included). Weight: 10 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hexagonal adapter made of nickel-plated brass is used to connect individual elements at the input/output (modules) of the Syntesi® system type SY1 or SY2 (both with each other and with the pneumatic installation), which can be easily disassembled using two screws. Adapter material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction socket of lever connector FERRARI with hose end, type F.10, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, sewage treatment, wastewater disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DN11.8 with internal thread facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Sealing: viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight flange end INTERLOCK SAE 6000, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external thread type A19, intended for connecting pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight NON SKIVE end with internal BSP thread, featuring a 60° cone seal with an O-ring (DKOR), designed for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N... Installation: without cutting the hose rubber. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, hexagonal nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered BSPT thread made of AISI 304 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning plug for hoses and pipes intended for ULTRACLEAN devices. Used where a layer of scale, rust, and other contaminants accumulates on the inner surface of hoses and pipes. Cleaning involves propelling the plug using compressed air. Available diameter range 6 ÷ 110 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle body of BANJO coupling with internal BSP thread type D12. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety hose to prevent the effects of accidental hose disconnection. AC and BC versions have copper sleeves and are intended for use in mining. Cable material: galvanized steel or stainless steel.
