Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule NON SKIVE for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13 and R15. Use only with suitable fittings hydraulic NON SKIVE from the same supplier. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType L ferrule intended for crimping a hydraulic-type fitting (fittings as for high-pressure hoses, type Z) onto industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. The ferrule length L should not exceed the length of the fitting tail Lk. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose with rubber silicone vulcanized platinum. used in industry pharmaceutical, cosmetic and biotechnology, equipment medical, culture cells, sterile lines filling, for water for injection (WFI), in chemistry and analyzers blood, in chromatography liquid. can be used in pumps peristaltic – moderate service life. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. meets requirements hygienic American FDA 21 CFR 177.2600, NSF-51, 3-A and USP Class VI and ISO 10993 for contact with blood, fluids body and tissues for 30 dni. possible sterilization steam (30 min, 1 bar, 121°C), oxide ethylene or radiation (for 2.5 Mrad). Length of a full hose roll 15 m. hose Available in sizes inch and metric. pressure working determined relative to pressure bursting at factor safety 1:5. Material: silicone (platinium). Maximum operating temperature: +204°C. temperature brittleness: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for machining finishing ends pipes po cutting (removal burrs with outer and internal edge). intended for pipes made both of carbon steel as and steel stainless. Maximum Diameter tubes: 42 mm. Voltage: 230 V. Moc: 0.18 kW. speed: 50 obr/min. weight: 30 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality thin-walled hose type BARRIER for flow freon in single braid polyester for use in automotive and industrial systems air-conditioning and refrigerant working based on freon R134a, R1234yf, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to abrasion and conditions atmospheric. standards: SAE J2064 type C Class I. Inner layer: black rubber CR divided layer nylon (PA). Reinforcement: a polyester braid. Outer layer: black rubber CIIR, micro-perforated. Working pressure: 35 bar. Operating temperature: od -35°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows na use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: from 12 bar to 16 bar - depending on diameter hose. temperature use: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for automotive systems brake. made in accordance with the standard DIN 74310, is characterized high resistance on abrasion. Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: high-strength a synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 400.000 pulse cycles. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 95°. Available in natural and blue. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on the diameter hose). Operating temperature: od -40°C up to +75°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +160°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid of steel AISI 304. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids na base water. used we all types industry. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: smooth PTFE (teflon). hardness Shore (D): 58. temperature use: from -200°C to +260°C. pressure working: od 2.3 bar for 10.8 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant na high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black or red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for high-pressure washing cold and hot water. resistant to abrasion, ozone and detergents. Not is suitable for cleaning steam. standards: EN 1829-2:2008, EN 853 1SN or EN 853 2SN - compliance dimensional. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber. Working pressure: from 210 bar to 400 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA to hose suction-delivery intended for conveying juices, drinks, milk, water, wine, beer, alcohols with a concentration up to 50% and other products food. not recommended for greasy substances such as oils. except for intended use food, can be used between other in industry, construction czy agriculture, for light chemicals, dirty water, sludge, sewage and other liquids not containing fats, oils and hydrocarbons. is suitable also for air, a embedded in wall hose steel spiral allows use go for vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk. at this kinds substances, should take into account abrasion resistance and any problem electricity static. smooth surface inner reduces losses flow and ensures ease cleaning. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 7 bar - depending on the diameter hose. vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the diameter hose. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug lever coupling ANFOR with "tail" for hose for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong screw clamp with a hinged closure for heavy loads, featuring a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band from 18 mm to 26 mm wide. The rolled edges of the band prevent damage to the hose surface on which the clamp works. The clamp is marked on the band with the minimum and maximum diameter and the material it is made of. Thanks to the hexagon screw head, commonly used tools such as open-end, socket and adjustable wrenches can be used. Material: all components made of AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOPFLEX® to system securing, which protects devices against damage and workers against injury in case tearing hose with fastening fittings. torn out with fittings hose will be held using cable. clamp, equipped in rubber a gasket, ensures stable fixing, independently od changing pressure working. securing intended is for lines hydraulic and selects je for individual types ends (metric, inch, flange, etc.). additional should purchase appropriate clamp STOPFLEX® (index OP-SFO-...) for given diameter hose. System has been tested on line working under maximum pressure working hoses, specified in accordance with following standards: EN 853, EN 854, EN 855, EN 856, SAE J517. correct action guaranteed is under a condition not exceeding pressure working the given in standards.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe RFL L type U throttle check valve (push-in connection at the valve inlet and outlet) regulates the airflow in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality two-way ball valve type BKH with a thread internal BSP, intended for high-pressure installations hydraulic and industrial. For the correct selection of a valve for media other than hydraulic oil and for high operating temperatures, please consult Tubes International. Working pressure dependent od material sealing valve. Material: steel (body, ball, stem). Seals: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (PA); from -40°C to +150°C (PVDF); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. used mainly in heavy conditions, for sampling samples, cutting flow and for stations for testing. standard with stem type V (work valve close - open). each valve is factory tested. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: NPT female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VMP limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in Connection pressure-gauge (1/4" BSP female) and holes assembly. Material body: steel galvanized. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 300 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve gate type 2029 with seal metal-metal and stem non-rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Body material: AISI 316 steel. Material gate: steel AISI 316. Material a knob: aluminum. sealing stem: PTFE. Connection: BSP female. Operating temperature: od -20°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA type FPR check valve intended for closing the flow of hydraulic fluid in one direction and opening free flow of fluid in the opposite direction. standard pressure opening: 0.5 bar (also available 3, 6 and 10 bar). Permissible flow direction: A → A1. Material: steel galvanized (body), hardened steel (stem). Sealing: metal-metal. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread internal trapezoidal (nut swivel or fixed) compliant with the DIN EN 12713 standard and fitting for hose. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling reloading TW type VK with a thread internal BSP. Intended for mounting on hose ends or pipe installations having a male BSP thread. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). Intended for liquids, bulk materials and gases (except liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing thread (type the gasket GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with BSPT male thread, type B1, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on coupling with BSPT male thread, type C1, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection angled 90° with a male BSP threadT, made entirely of steel AISI 316L, series 60110. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow swivel, screw with a thread external cylindrical, series F type R 31 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled adjustable with a thread external, type R31, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic filling gun type 227X made of stainless steel with a flow rate of 40 l/min, intended for AdBlue and water. As standard it is equipped with a 1" BSP female swivel connection that prevents hose twisting. It has an automatic medium shut-off system. It is compatible with all dispensers at fuel stations. It is not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: rubber-coated stainless steel. Color: blue. Flow rate: 40 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever valve gate enabling fast opening and shut-off flow. The design gate with double articulated dial ensures good sealing. used in agriculture, equipment vehicles sewage and in industry. meets requirements the directive PED 2014/68/UE. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material gate: brass. Material lever: steel carbon. sealing stem: fiber. sealing body: NBR. Connection: BSP female. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliable and flexible, easy in handling hose suction-delivery intended for conveying greasy and non-greasy substances food, requiring the use of rubber free of odour and taste. Contains no plasticisers, phthalates or substances of animal origin. Layer inner with NBR resistant to used standard in industry food agents and processes cleaning. Layer outer resistant to momentary contact with fats animal and vegetable. especially recommended for applications demanding small radius bends at sound strength on pressure and vacuum. Widely used in industry dairy and for handling milk in ordinary conditions use. not recommended for applications transfer in heavy conditions use and at pressure pulsating. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German institute ensuring quality and certification). Inner layer: white NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe PVS screw-together socket of a hydraulic quick coupling, intended for installations at very high pressures with large mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. It can be connected / disconnected when residual pressure is present in the system. Caps should be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of AISI 316 stainless steelL with a thread internal BSP. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with a thread internal BSP o free flow intended for cold and hot water. A double-sided socket gasket without a valve seals both the plug and the threaded connection with the installation, which ensures a long service life. Material: brass (balls, spring - steel stainless). Working pressure: 16 bar. Sealing: EPDM (with approval KTW, DVGW W270 for water drinking). Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with a thread external NPT. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable with each other (different plug diameter), which allows avoiding mistakes in connection. Recognizing the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug has no notch. pressure working: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket lever coupling ANFOR with "tail" for hose for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.
