Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer GAR series GA with a female BSP thread, set manually, stays constant value pressure at the outlet, independently od fluctuations pressure against valve. W the set found A handle assembly and pressure gauge. Do connecting individual element of each other, serve sets connecting GA (shape L, T, U). Size: 200, 300, 400, 600. Supply pressure: up to 10 bar. Operating temperature: od -20°C up to +70°C. Connection: 1/8" BSP female ÷ 1". Flow rate: 1400 l/min - size 200, 2100 l/min - size 300, 5000 l/min - 400, 6800 l/min - 600 (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee angled "Y", adjustable with a thread external, type R25, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtremely Light, flexible hose delivery for water intended for internal protection fire-protection buildings. Layer inner with high quality rubber synthetic. layer external constitutes strong, dense a polyester braid with stiffening thin and densely arranged spiral plastic PET. hose is used in cabinets hydrants internal with section 20 m for 30 m hose wound on A reel (reel) with mounted on the end hose nozzle. compliant with the standard EN 694 for hoses firefighting ( type B class 5 ). W the scope protection fire-protection (Poland) has certificate conformity CNBOP-PIB. can be also used in industry - for water sea, water industrial and some light diluted chemicals and for air, dusts and light particles solid. Not is intended for use in heavy conditions external. Assembly with clamps or ferrules clamping on ends with smooth, free of sharp barbs spigots, in order to avoiding cutting layer internal. Inner layer: smooth synthetic rubber. Reinforcement: a polyester braid with stiffening spiral (cord) PET. Working pressure: from 7 bar to 12 bar - depending on the diameter hose. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in design machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP - outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hose intended for CO2 systems in industrial and marine firefighting installations. Resistant to very low temperatures. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -60°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft hose delivery, for greater diameters and small wall thickness almost flat at rest, intended for pneumatic conveying dry substances bulk. Layer inner with black, smooth, antistatic (R 6 Ω), resistant to abrasion rubber (70±5 mm 3 acc. to ISO 4649, formerly DIN 53516). Reinforcement cord synthetic. Layer outer with antistatic (R 6 Ω) rubber resistant to abrasion, conditions atmospheric and ozone. hose used primarily for handling cement, sand, gravel, silica and other dry materials abrasive with tankers railway, road and silos. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic. Outer layer: black rubber NR/SBR. Working pressure: from 5 bar to 6 bar - depending on the diameter hose. Operating temperature: od -40°C up to +70°C. indexes marked on the end letters XE have layer inner with rubber antistatic o high resistance to abrasion (abrasion resistance 50 mm 3 acc. to ISO4649) and with a cable copper.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug water quick coupling NiTO CLICK 3/4" with a thread external. NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK E with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with manual control, front lever, most often used for controlling the operation of actuators. It can be mounted in-line, on a wall, directly on actuators or on a connection block. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ adapter with a female BSP thread intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Available in a forged version with a working pressure of up to 16 bar and in a cast version, characterized by a significantly lower strength, with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (coupling forged), 6 bar (coupling cast). Gasket: white NBR rubber (forged couplings), black NBR rubber (cast couplings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple bulkhead hydraulic (high-pressure) without a nut, type A107, with BSP male thread (60° cone sealing). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandy nozzle straight for compressed air with a lever, intended for removing with surfaces all contamination: liquids, fine chips, filings itp. construction the lever reduces fatigue and discomfort operator, even during longer use. equipped in standard nozzle o diameter hole 2 mm. depending on connections we distinguish nozzle ending in fitting for hose o diameter 6 mm and 9 mm or a plug EUROSTANDARD 7.2. Material: aluminum. diameter hole nozzle: 2 mm. pressure Maximum: 8 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with a male thread allowing UHP quick couplings and hoses to be joined together, as well as connected to UHP connection blocks. Material: carbon steel, black-galvanized. Working pressure: 700 bar (at a safety factor of 4), 1000 bar (at a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp RUBBER P-CLIP compliant with the standard DIN 3016 recommended for safe and damping vibrations mounting pipes, hoses, bundles cables, corrugated pipes electrical-installation (cover on cables) etc., for which exists possibility abrasion and damage. A clamp this type found wide use, m.in.: machine agricultural and construction, design engines combustion, industry railway, equipment electric, equipment AGD etc. made is with one section bent tape steel and rubber flange. holes on obu ends tape are reinforced steel plates, co ensures strength on clamping at large loads mechanical. tape made of carbon steel galvanized (W1), profile with rubber EPDM resistant to water, abrasion, changes temperatures and aging. A clamp not contains screws, washer and a nut. Material: steel carbon, galvanized (tape), EPDM rubber (flange). Band width: 20 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality A gun for steam meeting requirements safety use with steam water. equipped in coupling swivel for hose. Available with wide range equipment – different kinds lances and nozzles. used for rinsing and cleaning steam equipment, equipment, floors, defrosting equipment external. incoming for gun a hose steam is in center gun redirected for valve shut-off against leakage through lance and nozzle. ergonomically designed A trigger reduces force opening valve. release trigger causes Automatic shut-off inflow steam, securing against jej undesirable outflow and possible accidents. special insulation thermal gun (perforated A guard with sheet stainless na bridges with resistant thermally plastic) eliminates risk burns. A handle gun can be easily remounted na the other side, for operation through the operator left-hand (nie enters in composition gun and should order separately!). standard A gun equipped is in coupling swivel, co prevents tightening hose during use. A gun is often used together with of specialized valve for steam – available na request. selection configuration gun in contact with Tubes International. Material: steel stainless (main element, resistant thermally plastic. sealing: PTFE with fiber glass. pressure working: 10 bar. temperature use: up to +180°C (momentarily up to +210°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC 37° with BSPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA STORZ reducing coupling intended for transfer installations for liquid and bulk substances. Used in firefighting, irrigation systems, the chemical and food industry, agriculture, etc.. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, thanks to which they can be easily connected together. Parts with the same lug spacing can be connected. Available in a forged version with a working pressure of up to 16 bar and in a cast version, characterized by a significantly lower strength, with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (coupling forged), 6 bar (coupling cast). Gasket: white NBR rubber (forged couplings), black NBR rubber (cast couplings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical tee 90° KTSB 90 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve clamping AF-THU for hoses PTFE type HYPERLINE SB, FX, V. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, resistant to kinking hose suction - delivery designed for conveying hot, dry air of compressor for installation bowl tankers. ideal in cases when required is small radius bends. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: a synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for pneumatic conveying dry substances abrasive. special The design hose o exceptional resistance to abrasion. Layer inner smooth, with black antistatic rubber natural with embedded in it balls with corundum (Al 2 O 3 - oxide aluminum), material ceramic o high hardness. built-in cable copper, which po earthing (connection with earthed fitting) discharges charges electrical. Layer outer corrugated with black, antistatic (R 6 Ω) rubber SBR / NR resistant to abrasion and aging. hose intended for conveying dry strong abrasive substances: e.g. dry cement, carbon, coke, solid fuels with raw materials secondary, minerals, powders ceramic, shot steel, fragments glass, fibre glass. used in smelters, coking plants, power plants, cement plants, mines, smelters glass, factories materials abrasive and materials insulating. advantage is large service life hose in these use, traditional hose with rubber resistant to abrasion can work e.g. only several dni, a hose ALUSPHERE in these same conditions even several months. assembly: hose intended for mounting system GHIBLI - aluminum half-flanges PN10 applied externally on hose. Inner layer: balls ceramic embedded in black rubber NR. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber SBR/NR. Working pressure: from 8 bar to 10 bar - depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil hydraulic systems, gases, air, fuels, water-based fluids. standards: SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: one or two synthetic braids. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 210 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug water quick coupling NiTO CLICK 1/2" with double fitting for hose, enabling Mounting hoses o two diameter. NiTO CLICK quick couplings are water quick couplings made to the profile of very popular plastic garden quick couplings and compatible with them. Sealing by means of an O-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. Intended for water, water with cleaning agents, for use in industry, services, horticulture, agriculture, etc.. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK A with a thread internal BSP made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal directional valve with control by mechanical, a rod resilient of assist, most often used for controlling the operation of actuators. It can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. pressure working: up to 10 bar. Operating temperature: -10°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet FR+L to connection filter-regulator and lubricator. Filter - reducer consists of standard filter air and valve reducing built-in in one housing. task filter is separation heavier fraction contaminants air using force centrifugal, whereas valve reducing, thanks to diaphragm shaped ensuring maximum sensitivity and precision setting. has additional the connection with the front and with the back enabling connection pressure gauge or fittings for pressure reduced. Grease nipple to most widely used solution ensuring correct lubrication equipment actuating in installations pneumatic. On jej rear and front surface is found also the connection auxiliary for connection pressure gauge, sensor pressure or for additional draw air. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1, up to 13 bar for SY2, up to 10 bar for trigger RA. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Filtration grade: 5 µm, 20 µm, 50 µm. capacity bowl oil: 60 cmcm³ - SY1, 130 cm³ - SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: hand /semi-automatic (RMSA), automatic (RA). Flow rate: 1400 l/min - SY1, 4000 l/min - SY2, (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® 90° fitting for an inch tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible working pressure is determined on the basis of the outer diameter and the wall thickness of the tube (details in the attachment). Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in angled, adjustable triple with a thread external, type R52, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter with a male thread and a female thread allowing UHP quick couplings and hoses to be joined together, as well as connected to UHP connection blocks. Material: carbon steel, black-galvanized. Working pressure: 700 bar (at a safety factor of 4), 1000 bar (at a safety factor of 2.8).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter type A205 with BSP female thread (thread sealing) and with NPT male thread (thread sealing). Material: AISI 316L.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle standard with central a hole (Available diameter hole 1.5 mm and 2 mm), is characterized concentrated a stream air o high force blowing. level noise 90 dB at pressure above 4 bar. connection: M12x1.25 male. Material: aluminum. pressure Maximum: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter with reducer (filter-regulator) FR, series SKILLAIR®, without plates end, is a device consisting of a filter and a reducing valve. It reduces and purifies the air supplied by the compressor. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size and kinds trigger. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1600 l/min - series 100, 3000 l/min - series 200, 5600 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hoses thermoplastic and hydraulic intended for gases high-pressure with a thread internal G-3/4" (3/4" - BSP), Connection acc. to PN-81/M-69229 (DIN477-1 nr 9). purpose: oxygen, carbogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShears PZP12 or PZG28 for cutting hoses and pipes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LET-LOK® straight fitting with a BSPT male thread for a metric tube intended mainly for the chemical, petrochemical and pharmaceutical industry, power generation, nuclear power plants and process engineering. The permissible working pressure is determined on the basis of the outer diameter and the wall thickness of the tube (details in the attachment). Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDirectional valve plug-in, type R42, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve clamping for hose brake PTFE type OBHR. Material: steel stainless.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve clamping AF-TH for hoses PTFE type HYPERLINE SB, FX, V. Diameter D1 - Diameter outer. Diameter D2 - Diameter lock. Diameter D3 - Diameter inner. Material: steel AISI 304 or 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA standard gasket for the female part (socket) of a CAMLOCK coupling. Material: black neoprene (also available in white - index suffix "-NF"). Operating temperature: from -50°C to +107°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and pliable hose rubber, for extraction and transport sand, gravel, cement and other abrasive materials. Also used in systems for cleaning and removing abrasive material after abrasive blast treatment. Layer inner smooth, with abrasion-resistant rubber o wall thickness 3 mm. Layer outer corrugated, resistant to abrasion and conditions atmospheric. thanks to reinforcement spiral steel resistant to kinking and vacuum. designed both for extraction as and use pressure. It has a copper anti-electrostatic wire for discharging electric charges. Inner layer: black or brown rubber natural. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber NR/SBR. Working pressure: from 2 bar to 3 bar - depending on the diameter hose. Vacuum: for 0.9 bar. Operating temperature: od -30°C up to +70°C.
