Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for transfer milk and substances food, demanding use rubber free of smell and taste. Nie contains plasticizers, phthalates ani substances origin animal. special The design hose "CRUSH PROOF" of spiral with plastic allows return hose pod pressure for primary shape po accidental running over go np. truck forklift. hose is light and easy for handling. hose designed primarily for unloading milk with tankers. Nie recommended for heavy conditions use in use process. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification. Inner layer: white mixture NR/NBR. Reinforcement: braid synthetic, spiral PET. Outer layer: blue rubber synthetic. pressure working: 16 bar. Vacuum: 0.7 bar. Operating temperature: from -30°C to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring substances food, demanding use rubber free of smell and taste. Nie contains phthalates and bisphenol A. Layer inner with NBR/PVC resistant na used standard in industry food agents and processes cleaning. appropriate for milk and its products and fatty substances food. wide used in industry food in standard conditions use. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber NBR/PVC. Reinforcement: braid synthetic, spiral steel. Outer layer: blue rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -15°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very flexible and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant na steam o high temperature. Layer outer resistant na high temperature and conditions atmospheric. Do steam water use special fitting screw-together screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to elongation service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: double braid steel. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. Operating temperature: from -40°C to +210°C (momentarily up to +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant na most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low coefficient friction during flow, protecting deposition medium na walls. facilitates to significantly cleaning and allows na use also in industry cosmetic, pharmaceutical and food. Reinforced with synthetic cord and steel spirals. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose wide used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). installing: should use fitting with a spigot ("a tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. Diameter spigot should be precisely matched for diameter hose in order to ensuring tightness. installing sleeves clamping or clamps shell. confirmation resistance and conditions use requires contact with Tubes International, in particularly for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, spiral steel. Outer layer: black rubber EPDM. pressure working: 16 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforced with synthetic cord and steel spirals. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spirals steel. Outer layer: black rubber NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber CR. pressure working: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring fuels and liquid products industry petrochemical, containing for 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. can be used for tankers, tanks, stations loading, equipment industrial. hose wide used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant na abrasion, oil, ozone and conditions atmospheric. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber SBR/NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance na high temperature and steam saturated. Layer outer resistant na temperature, abrasion, conditions atmospheric and ozone. hose wide used in industry for low-pressure steam saturated – for light applications. For water steam, use special fittings bolted with screws, intended for water steam. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 6 bar. temperature use: from -40°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum, resistant na UV and ozone. compliant with requirements 1935/2004 CE, FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. factor safety is 4:1. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral steel (AISI 316). Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements with FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227 and directives CE 1935/2004. maximum vacuum 736.6 mm Hg (0.98 bar). At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral of steel AISI 316. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for water, juices, beverages and other products food, reinforced has been spiral with hard PVC, through co hose gained also na lightness. additional resistant na impact spiral, ensures good strength na vacuum and kinking hose. transparent wall whereas, facilitates easy control visual flow medium, a no phthalates in material, use hose for transferring milk and its products and alcohols o concentration for 50%. not recommended is for oils and fatty substances food. smooth surface inner reduces losses flow and ensures ease cleaning. outer surface also smooth, facilitates installing ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in cleanliness. as hose reinforced only spiral with hard PVC, nie having braid, pod pressure undergoes certain elongation, co should take into account in use, particularly in temperatures above 40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral with hard PVC. pressure working: from 5 bar to 7 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such jak water, juices, beverages, beer, wine, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-CR). Not recommended for food substances containing fats and oils. is suitable for milk and its products (nie is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Material hose: transparent PVC. Reinforcement: braid polyester. pressure working: from 8 bar to 22 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure line with fitting and restrictors deflection intended for equipment for pressure washing cold and hot water. resistant to detergents, oils, ozone and conditions atmospheric. standard fittings: M22 female x 1.5 (steel AISI 304). Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, micro-perforated synthetic rubber. Operating temperature: od -10°C up to +155°C. Working pressure: 500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, beverages, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-MS), and other products food. Not recommended for food substances containing fats and oils. is suitable for milk and its products (with railway nie is suitable for milk and products milk hose o index SO-PVCSTAR-MS). Reinforcement spiral with wire steel, embedded in wall, PVC, ensures good resistance na vacuum and kinking hose. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows na easy control visual flow. at the absence direct contact with food (in industry, construction, agriculture) can be used for light chemicals, water, sludge and sewage, other liquids (without fat, oils and carbon). as hose without braid is characterized certain elongation pod pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Dla hoses o index SO-PVCSTAR-MS: industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral steel galvanized. pressure working: od 6 bar for 11.5 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, flexible and almost smooth inside hose intended for extraction and transferring dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. thanks to made with polyether–polyurethane has good resistance na abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope transferring bulk and liquid materials food, in this fatty or oily. Nie recommended for milk and its products. Reinforcement spiral with hard PVC ensures good resistance na crushing. version antistatic hose has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective grounding cable ensures sufficient for many applications level discharge charges electrostatic. used in particularly in industry agricultural–food, plastics, materials construction itp. hose WIND STAR PU is compliant with the European requirements 10/2011/EU (simulants A, B, C, D2 and E), and American FDA 21 CFR 177.2600 „d”, „e”, „f” (dry, liquid-water, fatty). information additional regarding applications food and pharmaceutical – see section „hoses for products food”. Material hose: transparent polyether- polyurethane. Reinforcement: spiral with hard PVC. Operating temperature: from -40°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, six-layer hose intended for washing cold and warm water and light chemicals. Layer inner o elevated resistance to temperature. layer intermediate and outer resistant to detergents, agents disinfecting. Layer outer in quality food, o elevated resistance to greases, fats, oils. hose highly resistant to kinking. recommended for use in industry food. compliant with the European requirements for substances food EU No.10/2011 (simulant fluids A, B, C). recommended the fitting TR-THERMO-12-BZ140-08-SS. Inner layer: smooth PVC. Reinforcement: double polyester braid. Outer layer: smooth PVC. Working pressure: 50 bar. Operating temperature: od -15°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber CR. pressure working: 20 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose for highest pressures in applications washing high-pressure cold and hot water. is characterized resistance on detergents, oils, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, micro-perforated synthetic rubber. Working pressure: 500 bar. Operating temperature: od -10°C up to +155°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong and flexible, multi-braid line, used mainly for high-pressure cleaning and cutting water, hydroforming, hydraulics, injection chemicals and lubrication under high pressure. line is tested pressure and supplied of appropriate certificate. meets standard EN 1829-2. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (sleeve). Working pressure: 2500 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong and flexible, multi-braid line, used mainly for high-pressure cleaning and cutting water, hydroforming, hydraulics, injection chemicals and lubrication under high pressure. line is tested pressure and supplied of appropriate certificate. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (sleeve). Working pressure: 2800 bar. Operating temperature: od -30°C up to +70°C (+60° for hose SS-NW-05-6H).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, light and flexible, two-braid line, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, exchangers heat, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyoxymethylene. Outer layer: polyamide. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1200 bar, depending on the diameter. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, light and flexible, two-braid line, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, exchangers heat, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyoxymethylene. Outer layer: polyamide. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1000 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP male thread, flat sealing - requires the use of an additional flat gasket (AGR-F). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with BSP male thread, 60° sealing cone (AGR). Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOL), angled 90°, series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber NBR. pressure working: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with metric female thread with a nut, sealing an O-ring on a 24° cone (DKOS), series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BEL), angled 45° series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BEL), angled 90° series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BEL), series light. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BES), angled 45° series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard hydraulic fitting (type Z – with an ordinary hydraulic "tail" for the hose), with tube metric, cutting-ring sealing (BES), angled 90° series heavy. Intended for crimping onto hydraulic and industrial hoses using a ferrule suitable for the hose type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA weld-on spigot, type WRS, for an EN 1092-1 PN16 flange, for mounting with an RS shell clamp or for crimping with a TI-LR, TI-LDR ferrule. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap intended for socket coupling lever FERRARI, type F.6B, used among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for flanges SAE. Material: polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA flat IBC gasket for a flange PN made acc. to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (the selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: a gasket DN 10 PN40 is suitable for class PN10, PN16 and PN25. Material: KLINGER SIL 4430. pressure working: up to 100 bar. Operating temperature: from -200°C to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA flat IBC gasket for a flange PN made acc. to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (the selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: a gasket DN 10 PN40 is suitable for class PN10, PN16 and PN25. Material: PTFE. pressure working: up to 300 bar. Operating temperature: from -200°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling plug with fitting for hose, type F.8, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.
