Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap intended for socket lever coupling FERRARI, type F.6B, used among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic filling gun type 227 made of aluminum with a flow rate of 60 l/min, intended for diesel fuel. As standard it is equipped with a 1" BSP female swivel connection that prevents hose twisting. It has an automatic fuel shut-off system. It is compatible with all dispensers at fuel stations. It is not intended for AdBlue® or unleaded gasoline. Outlet diameter: 24 mm. Material: rubber-coated aluminum. Color: black. Flow rate: 60 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. especially recommended and Widely used in hospitals and ambulances. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium - blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHand, light device for bending pipes o diameter od 8 for 22 mm. set contains roll bending and sheet-metal, strength case. Dla increasing precision bending roll equipped in scale value angles. greater roll applied are on smaller thanks to this set is lighter. device adapted for mounting in vice. weight: 14 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling for mounting bulkhead with fitting for hose, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. The ergonomic shape and large release button provide convenient handling and ease of use. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick-coupling socket with a female thread and with a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be fitted with a ring to prevent accidental disconnection. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (coupling connected). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling DN11.8 with a thread external facilitating fast connection spray gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Material balls: steel AISI 316. Sealing: Viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with fitting for hose. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable with each other (different plug diameter), which allows avoiding mistakes in connection. Recognizing the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug has no notch. pressure working: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve for a diagnostic quick coupling, with an NPT female thread, used for pressure measurement in power hydraulic systems. Manufactured according to ISO 15171-1 and SAE J1502, interchangeable with couplings from other manufacturers. The hardened steel quick coupling plugs are, as standard, permanently installed in the hydraulic system, while the quick coupling sockets are connected by a hose to the pressure gauge. Connecting the socket to the plug should be done only when the system is not operating, with no pressure or very low pressure of a few bar. The socket and plug are equipped with valves that ensure leak-free connection and disconnection and tightness. Their flat surfaces minimize residual oil leakage and air inclusion into the system (leakage approx. 0.1 ml on disconnection, air inclusion approx. 0.02 ml on connection). For proper operation it is essential to keep the valve surfaces clean. Working pressure: 400 bar. Burst pressure: 1300 bar. Vacuum: up to 0.9 bar. Hydraulic oil flow at Δp = 3 bar: 4.2. Material: galvanized steel. Sealing: NBR. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK C with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar - in depending od size coupling. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling socket with fitting rolled for hose with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: SBR. Working pressure: up to 10 bar (up to 8 bar – for size 216 mm).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting for hose with a BSPT male thread. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type CNP terminated with a tapered BSPT male thread made of galvanized steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands, clamps or special sheet-metal ferrules of the CNFL type. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for cleaning hoses and pipes intended for equipment ULTRACLEAN. removes fine particles contaminants bulk with surface internal hoses and pipes. cleaning consists in on perforating plug using compressed air. Available the scope diameters 2 ÷ 95 mm. possibility sale in packaging collective (amount pcs in packaging collective dependent is od diameter outer plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose intended for discharge air, vapours oil and fuels, dust, dusts, very fine sawdust, chips and light bulk materials. Dla all types industry, in particular often used for dedusting and discharge vapours and fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, in version AS with polyether resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU – version with polyester - polyurethane, o very sound resistance to abrasion; P2 PU AS – version antistatic (R ≤10 8 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made with polyether - polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyether – polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection lower FM 631, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection bottom: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal gauge mounted to regulators of the types SYNTESI, BIT, SKILLAIR and NEW DEAL. The measuring range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range. The scale is expressed in bars and PSI. Size: 1/8" or 1/4". Operating temperature: up to +50°C. Measuring range: 0 ÷ 4 or 0 ÷ 12 bar. Material housing: plastic. Material dial: aluminum. Filling: none (dry gauge).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket, type A3, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini Grease nipple Intended for direct connection for tools pneumatic, such as keys pneumatic, grinders etc. in order to lubrication tools mist oil. thanks to short way od lubricator for tools, ensured is fixed supply oil. level filling is always visible. such solution protects element internal against corrosion and reduces wear cooperating element. mist oil formed is through flowing stream air. dosing oil is already set factory and is ok. 50 mm 3 on 1m 3 flow. one dose is enough on ok. 10 hours at flow capacity 109 l/min. oil (index: EW-583) should order separately. maximum Working pressure: 8 bar (recommended 6.2 bar). Operating temperature: od -5°C up to +60°C. Material: NBR (sealing), aluminum (housing), acetal (reservoir).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple made of stainless steel, type 62000, with BSPT male thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp intended for securing hoses on standard (smooth) fittings with a safety flange. Material: AISI 316 steel. Working pressure: 25 bar (with an appropriately selected hose and EN 14420-3 fitting).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp, manufactured in accordance with (up to hose diameter 38 mm) or close to (from hose diameter 50 mm) DIN 20039 A, with separate inserts – pressure "tongues". Intended for mounting fittings and couplings with a hose part ("tail") without a lock (safety flange), made of high-quality galvanized ductile cast iron (with yellow passivation free of hexavalent chromium). Indices from LU-SL-400 to LU-SL-988 are additionally reinforced and intended for large diameters. Material: galvanized ductile cast iron. With correct installation and an appropriately selected hose and fitting, working pressure up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover spiral PROTECTOR intended for securing hoses (cables) against abrasion, impacts and crushing. It also serves to hold a group of hoses (cables) in the molds of a bundle. It improves the visibility of the covered hoses. Resistant to acids, oils, solvents and UV radiation. Dla diameters external od 75 mm for 140 mm sections have hole facilitating connection in greater length (nie applies to coils). easy in installations both against, jak and po mounting hose. Available in color black, yellow and red. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal cover hoses, cables and lin in the molds sleeve. resistant na flame, abrasion, oils and most industrial chemicals. Used in steelworks, metal and glass smelters, foundries - splashes of molten metal and glass for not adhere to the cover. Also used to cover steam and hot oil installations - protects against burns and energy losses. very good resistance na moisture makes, that can be used also na outside. on request Available in other colors. On request, a VCO version with flame-retardant hook-and-loop (velcro) is available in the diameter range from 22 mm to 140 mm, in lengths up to 30 meters. The hook-and-loop mounting means that the cover can be easily installed without disconnecting lines, cables or pipes. Material: fiber glass coated silicone in color rust. Operating temperature: from -54°C to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel ring sealing type BX intended for connecting and sealing specially machined flanges with groove. has hole enabling equalisation pressure. ring this type It can be used only and only for flanges and grooves API BX. used in connections for high pressures and temperatures. detailed information on about dimensions ring found in switching on. Material: steel carbon. Working pressure: up to 1500 bar. Operating temperature: od -40°C up to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal A gun intended for removing with surfaces all contamination: liquids, fine chips, filings itp. light construction and ergonomic shape ensure easy and convenient use. Do liquids and media aggressive recommended A gun with nozzle of AISI 316 stainless steel. mechanism the lever enables precision dosing flowing medium. Available model with adjustment flow. compliant of the standard OSHA 1910.95 (b) and the directive 2003/10/EC. Material the body: acetal. Material nozzle: steel galvanized or steel AISI 316. diameter nozzle: 8 mm. Sealing: NBR. pressure working: 16 bar. Operating temperature: from -10°C to +80°C. flow: 380 l/m (at a pressure of 8 bar). level sound: 85 dB (at a pressure of 8 bar). force blowing: 3.92 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial Water gun resistant to heavy conditions use with adjustable nozzle outlet, regulation flow and a lock trigger. housing: EPDM rubber. Working pressure: up to 25 bar. Flow rate: 25 l/min - narrow stream, 42 l/min - wide stream (5 bar). Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P16 AP o pneumatic drive pump hydraulic Intended for workshops repair, points service, etc. adapted is for use with interchangeable sets jaws (ordered separately). has An electric (battery) indicator of reaching the crimping diameter. Np. for range diameters crimp od 10 for 45 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, where largest diameter crimp obtained on jaws main, which range is 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady line made with hose SUPER HYDRO WASH 1SC or with hose SUPER HYDRO WASH 2SC with restrictors deflection intended for equipment for cleaning hot or cold water under pressure. resistant to conditions atmospheric, agents cleaning, oils. length line: 10 m. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: 230 bar (1SC) or 400 bar (2SC), depending on type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight PUSH-IN for hose terminated a BSPT male thread or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with a BSPT male thread type AI 13480 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipe of steel improved drawn on cold. given pressure working is pressure theoretical acc. to DIN 2413-93. Material: E235+N according with EN 10305-4. St (HPC1). 37.4 NBK acc. to DIN 1630 (HPZ1). coating tubes galvanized free od Cr VI. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA polyamide and aluminum pipe is used in compressed-air installations. Recommended for the SPEEDFIT system. Material: polyamide, aluminum. color: blue, black. Standard pipe length (one section): 3 m (shipped in sections of 1 m, 2 m or longer after agreeing on transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO bolt with washers, type D7, for type R13, R14, D12, D17, D5, D6 fittings. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rail intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 301 using a nut ADES or ADESD. Shipped in 2 m lengths. Material: steel carbon or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA MWSE silencer with a male thread, used in compressed-air systems to reduce the noise level. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 28 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSheet-metal ferrule type H used for crimping hoses onto fittings that do not have a lock joining the sleeve with the fitting. It can also be used on NiTO fittings and on quick-coupling fittings. Sheet-metal ferrules can be used to crimp low-pressure hoses (up to approx. 30 bar depending on the diameter), made of various materials, provided that the hose material is soft enough for this type of crimping. Above all, rubber hoses with textile reinforcement and PVC hoses. It is also possible to crimp hoses with a steel braid (e.g. PZ type hose). The internal diameter of the ferrule should be selected to match the external diameter of the hose, while ensuring that the hole diameter at the front of the ferrule matches the fitting used. Diameter D2 - internal diameter. Diameter D3 - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule IL4 for rubber hydraulic hoses with spiral reinforcement type 4SH, R13 and R15. Use only with an INTERLOCK hydraulic fitting from the same supplier. Assembly - external and internal skiving. Diameter D1 - outer diameter. Diameter D2 - inner diameter. Diameter D3 - lock diameter. Material: carbon steel, galvanized.
