Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, reinforced high-pressure hose with four layers of steel wire, used in water cutting and cleaning devices. Applications of the hose include cleaning chemical and energy installations, cleaning and cutting concrete structures, road surfaces, and cleaning steel surfaces. The hose is pressure tested and supplied with the appropriate certificate. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black oil and abrasion-resistant synthetic rubber. Material of fittings and sleeves: carbon steel, galvanized. Working pressure: up to 1100 bar. Operating temperature: from -10°C to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 6000 flange connection with a compact design and internal BSP thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-braided hydraulic hose for high, constant pressure for all diameters. Hose with increased flexibility (bending radius 50% better than standard norm). Hose lifespan confirmed by a test of 500,000 impulse cycles. Outer layer flame-resistant (MSHA). Used in hydraulic power systems of large construction machinery and all types of hydraulic-driven equipment. Standards: ISO 18752 CLASS 350 CC. Inner layer: black synthetic rubber. Reinforcement: four layers of spiral steel wire. Outer layer: black synthetic rubber. Working pressure: 350 bar. Operating temperature: from -40°C to +120°C (hydraulic oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight partition fitting ORFS with external UNF thread (O-ring seal in the groove of the flat face), type SV. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTop plate for mounting heavy DIN 3015 clamp complete type 201. Material: carbon steel, galvanized or AISI 316L steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAE 3000 flange connection with a compact design and internal BSP thread for use in hydraulic systems. Supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with increased flexibility (bending radius 50% better than standard). Enhanced hose lifespan compared to standard confirmed by a test of 1,000,000 impulse cycles. Outer layer is flame-resistant (MSHA). Standards: EN 856 R15, SAE 100 R15, ISO 3862-1 R15. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 and DN 38). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 420 bar. Operating temperature: from -40°C to +121°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInspection gauge designed for monitoring hydraulic oil level, mounted on the side wall of the tank. Diameter D [mm] - size of the inspection opening. Material: aluminum (body), polycarbonate (inspection opening), guarnital (fiber washer). Maximum operating pressure: 5 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight reducing ORFS fitting with external UNF thread (O-ring seal in the groove of the flat face), type GR. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS adapter with external metric thread DIN 2353, 24° socket for tubing (seal cone 24°). Available as: L (light series), S (heavy series). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSensor mounted at the upper part of the tank. It is equipped with a float that rises to the surface of the oil. It signals the maximum or minimum liquid level in the tank (extreme positions of the float). Installation is possible using a thread or holes located in the flange. Recommended installation of the sensor at a distance of at least 50 mm from the tank walls and away from magnetic fields. Material: aluminum (mounting flange), stainless steel (tube guide), rubber (gasket). Protection degree: IP 65. Operating temperature: from -10°C to +90°C. Maximum load: 48V AC / DC - 0.5 A.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut with metric thread intended for mounting heavy clamp DIN 3015 type 201 on ABINP rail. Material: zinc-aluminum alloy or AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Used for low-pressure installations. Characterized by high flexibility and light weight. Standards: EN 854 3TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 55 bar to 145 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C. For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. Available on request in micro-perforated version (for gases and air). Inner layer: polyester. Reinforcement: polyester braid. Outer layer: polyurethane. Working pressure: from 80 bar to 200 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way switching valve, normally closed, used in hydraulic systems to control the direction of the working fluid flow. Control is performed using a manual lever. Material: cast iron (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 standard clamp type 100 (without top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. For size group 0, there is one hexagon socket screw, and for size groups 1 to 6, there are two hexagon socket screws. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: green polypropylene. Screw material: galvanized steel. Base material: carbon steel. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight adjustable pressure gauge connector ORFS with internal BSP thread (sealed with a metal washer), type FAV-B. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with a conductive inner layer (R<1.2x105 Ω/m) designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of CNG-powered vehicles. The outer layer is characterized by enhanced resistance to changing weather conditions and abrasion. Meets NFPA 52, ANSI/CSA NGV 4.2-2014, CSA 12.52-2014 requirements. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Working pressure: 345 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 853 1SN, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInspection window designed for monitoring hydraulic oil level, mounted on the side wall of the tank. The spherical shape of the inspection opening allows for side observation. Diameter D [mm] - size of the inspection opening. Material: aluminum (body), polyamide (inspection opening), guarnital (fiber washer). Operating temperature: from 0°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-way switching valve, normally open, used in hydraulic systems to control the direction of the working fluid flow. Control is implemented via a manual lever. Material: body - cast iron, stem - hardened steel. Sealing: NBR. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMagnetic drain plug mounted in the lower part of the tank. It has a magnetic pin that attracts and retains ferromagnetic particles floating in hydraulic oil. This protects the moving parts of pumps, distributors, valves, etc. from damage, increasing their lifespan. Material: aluminum (body), neodymium (magnetic pin up to 1"), alnico (magnetic pin 1.1/4"), aluminum (washer).
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° SAE 6000 flange connection with a compact design and external BSP thread for use in hydraulic systems. Supplied with mounting screws and an o-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonoblock sliding valve distributor YFM55 controlled by a manual lever with centering springs. Designed for hydraulic systems of cranes, lifts, construction machines, agricultural equipment, etc. Standardly equipped with a type C safety valve (set to 140 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 315 bar. Maximum return pressure: 25 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 1SC, EN 45545-2. Inner layer: black synthetic rubber. Reinforcement: single steel braid. Outer layer: black, flame-retardant synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with conductive fibers in the braid (R<3x104 Ω/m) designed for solvents, paints, isocyanates, polyols, water-based fluids. Standards: ISO 8031, SAE 100R7, EN855-R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid with conductive fibers. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert of DIN 3015 type 201 clamp made according to DIN 3015 standard. It typically features a profiled (grooved) surface for the pipe opening. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped ORFS tee fitting with external UNF thread (O-ring seal in the groove of the flat face). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAir vent plug with a check valve and O-ring mounted at the top of the tank. Opens during pressure increase in the tank (oil turbulence). Prevents contamination from entering the system during hydraulic oil suction. Check valve opening pressure: 0.15 ÷ 0.3 bar. Material: aluminum (body), steel (cover), guarnital (fiber washer). Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 3015 double clamp type 301 (with top plate) designed for quick, easy, durable, and aesthetic mounting of pipes, hoses, and hoses in various industrial sectors, in ground and marine installations. Manufactured according to DIN 3015 standard. The clamp is mounted to the structure using welding of the clamp base (there is an option for bolting or mounting on a rail). The clamp typically features a profiled (grooved) surface for the pipe opening. In addition to standard metal components, extended plates, rails, and screws for mounting clamp sets can be ordered. Selection of components should be consulted with TUBES INTERNATIONAL®. Clamp material: self-extinguishing polyamide. Clamp material: rubber. Screw material: galvanized steel. Plate material: galvanized steel. Base material: carbon steel. Operating temperature: from -40° to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight ORFS fitting with external metric thread (rectangular cross-section elastomer seal), type EVGE-ME. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonoblock sliding valve distributor YFM35 controlled by a manual lever with centering springs. Designed for hydraulic systems of cranes, lifts, construction machinery, agricultural equipment, etc. Standardly equipped with a type C safety valve (set to 140 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 315 bar. Maximum return pressure: 25 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with increased flexibility (bending radius 50% better than standard). Enhanced hose lifespan compared to standard confirmed by a test of 1,000,000 impulse cycles. Outer layer flame-resistant (MSHA). Standards: EN 856 R13, SAE 100 R13, ISO 3862-1 R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 38). Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 350 bar to 380 bar depending on hose diameter. Operating temperature: from -40°C to +121°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Also available in a microperforated version (for gases and air), marked with the letters "MP" at the end of the index. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 70 bar to 375 bar - depending on the diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsORFS fitting with internal BSP thread (seal on the thread - with Teflon tape or anaerobic sealant), type GAI-B. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonoblock sliding valve YFM80 controlled by manual levers with centering springs. Designed for hydraulic systems of cranes, lifts, construction machinery, agricultural machinery, etc. Standardly equipped with a safety valve (factory set to 180 bar) and type 1 sliders. Material: cast iron (body), hardened steel (sliders). Sealing: NBR. Maximum working pressure: 250 bar. Maximum return pressure: 50 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, fuels, water-based fluids. For use near transformers and medium and high voltage electrical installations. Non-conductive - leakage during testing according to standards less than 50 µA for a voltage of 246 kV/m for 5 minutes. Standards: ANSI 92.2, SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: orange polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 301 made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClosing flange SAE 3000 for use in hydraulic systems, supplied with mounting screws and an O-ring seal (NBR). Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed hydraulic end, type S, with internal BSP thread and nut, sealing cone 60° (DKR). Designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material: carbon steel, galvanized.
