Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mushroom valve type 2028 with metal-metal sealing and rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: stainless steel CF8M. Disc material: stainless steel CF8M. Handle material: aluminum. Stem sealing: PTFE. Connection: BSP female thread. Operating temperature: from -20°C to +200°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe needle control valve with BSP internal thread is used to regulate the amount of fluid flowing through the system by changing the cross-section of the flow opening, up to its complete closure. They are intended for air installations, and can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). Needle valves have a brass cone (needle) whose displacement allows for smooth regulation from the fully open position to closed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Needle material: brass. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe needle control valve with BSP external thread is used to regulate the flow of the medium in the installation by changing the cross-section of the flow opening, up to its complete closure. They are intended for air installations, and can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). Needle valves have a brass cone (needle), whose displacement allows for smooth regulation from the fully open position to closed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Needle material: brass. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP internal thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum working pressure is constant across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two external threaded outlets equipped with fittings for 6 mm or 9 mm hoses. Mounting position - any. Body material: brass. Operating temperature: from -10°C to +90°C. Working pressure: 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EWO air distributor allows for the installation of two or three shut-off valves, which can be closed individually as needed. It has two shut-off valves and two outlets with external threads. Mounting position - any. Body material: brass. Operating temperature: from -10°C to +90°C. Working pressure: 40 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angular shut-off valve with external BSP thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The shut-off valve is closed by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP external thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angled drain valve with external BSP thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both the system components and the compressed air receivers. Mounting position - any. Body material: brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight drain valve with metal-metal sealing and BSP external thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both system components and compressed air receivers. Mounting position - any. Body material: nickel-plated brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
