Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK coupling chain. Length: 200 mm or 300 mm. Material: AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band and a spring-loaded grip for improved handling. Allowed band width: 1/4" ÷ 3/4". Maximum band thickness: 0.76 mm. Application: Band-It® Standard and Band-It® Junior - in this case, the use of adapter BD-J00199 is necessary.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal two-piece ball valve with full bore and lever lock type 2006SC/SM3, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP female thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve type 2050 designed to protect installations from backflow of the working medium. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Spring material: steel AISI 304. Disc: steel AISI 316. Sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way fitting with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter mesh designed for water, oil, and gas installations. It is used to capture and remove mechanical impurities from the system. The filter must be installed according to the flow direction indicated on the body. The working pressure depends on the operating temperature. Body material: AISI 316 steel. Sealing: PTFE. Filter element: AISI 316 steel. Connection: BSP thread. Operating temperature: from -20°C to +200°C. Working pressure: up to 13 bar (+200°C), up to 50 bar (+40°C). Filter hole diameter: 1 mm. Hole density: 2 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFLOK® DU socket with BSP internal thread is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the levers of the socket. When closing the levers, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® DU socket is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. The coupling size 1/2" has a thread of 1/2" and a socket of 3/4". Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (1/2" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling socket with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. The characteristic design (does not contain balls and a securing sleeve) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pliers designed for the installation of EAR-CLIP type or similar hose ties. The jaw profile allows for easy and reliable front clamping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7163 intended for gas installations, in pressure class MOP 5-20. Complies with the requirements of the PED directive 2014/68/EU and 2009/142/EC, in accordance with standard EN331 + A1. Maximum constant working pressure across the full temperature range. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP thread. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional key with a flexible steel arm ending in a 7 mm socket for ASFA-L, ASFA-S, and similar worm clamps. The arm length allows work in hard-to-reach places. Comfortable ergonomic handle ensures a secure grip. Handle color: blue.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard handle (lever) for CAMLOCK couplings, type HR. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-closing band in full epoxy coating (increased corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug without valve with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe SAFLOK® DC cap is a variant of the CAMLOCK coupling with protection against accidental disconnection. The protection consists of spring-loaded latches located in the lever of the socket. When closing the lever, the latches automatically lock. Unlocking when opening requires pulling back the latches. The SAFLOK® DC cap is compatible with other CAMLOCK couplings made according to MIL-C-27487 standards. Spare parts are available: levers with latches and pins. Material: AISI 316 steel. Sealing: NBR. Working pressure: 20 bar (3/4" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 5311, L configuration, intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female thread. Operating temperature: from -10°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal butterfly valve, wafer type, centric, designed for industrial installations. Used for cold or hot water, drinking water, seawater and demineralized water, alcohols, lime milk, sodium hydroxide, and other media, considering the chemical resistance of the valve material and sealing. Can be manually opened and closed or operated by a pneumatic actuator. The handle positions the valve in 10 positions: "open," "closed," and intermediate positions. For sizes from DN200, there is a lever with stepless adjustment. Complies with the requirements of the PED Directive 2014/68/EU. Has a PZH certificate and Lloyd’s Register certification. Body material: gray cast iron EN-GJL-250, coated with 80 µm epoxy. Disc material: stainless steel CF8M. Stem material: stainless steel AISI 416. Lever material: aluminum. Disc and stem sealing: EPDM. Connection: PN6 flange for DN40 ÷ DN150 and DN300, PN10/PN16 for DN32 ÷ DN300, ASA150 for DN40 ÷ DN300, JIS 10K for DN40 ÷ DN300. Operating temperature: from -15°C to +110°C (temporarily up to +130°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve type 2281 intended for industrial installations, can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve can be installed in any position, according to the flow direction indicated on the body. Maximum constant working pressure across the full temperature range. Body material: brass. Spring material: AISI 302 steel. Disc: brass. Disc sealing: FKM. Connection: BSP thread. Operating temperature: from -10°C to +90°C. Minimum opening pressure: 0.02 bar for 3/8" to 2.1/2"; 0.1 bar for 3" to 4".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal filter designed for water supply, sanitary, heating, irrigation, industrial installations, etc. The filter must be installed according to the flow direction indicated on the body. Working pressure depends on the operating temperature. Filtration degree: 500 µm (from 1/2" to 2"), 600 µm (from 2.1/2" to 4"). Body material: brass. Sealing: NBR. Filter element: stainless steel AISI 304. Connections: GW BSP. Operating temperature: from -10°C to +90°C. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-handed bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The left-handed OML clamp is intended for mounting CLIP type hoses (hoses of this type are made from impregnated fabric, and the left-wound spiral is made from sheet metal and steel wire) e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple grip without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 430 steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Junior tape is a clamping system that uses pre-formed tape sections shaped into double-loop bands with an integrated fastener. The smooth surface of the tape and its proper installation on a non-corrugated hose create a leak-proof attachment at the end of the clamp. Installation is done using the BD-C00189 tool with the pre-forming adapter BD-J00199. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnvelope gasket for the female part (socket) of the CAMLOCK connector. Material: PTFE/NBR. Operating temperature: from -40°C to +93°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with external thread. NiTO CLICK quick couplings are water quick couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an o-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4170 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: NBR. Connection: G thread BSP. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal butterfly valve, wafer type, centric, designed for industrial installations. Used for cold or hot water, drinking water, and other media, considering the chemical resistance of the valve material and sealing. It can be manually opened and closed or operated by a pneumatic actuator. The handle positions the valve in 10 positions: "open," "closed," and intermediate positions. For sizes from DN200, there is a lever with stepless adjustment. Complies with the PED Directive 2014/68/EU. Has PZH certification and Lloyd’s Register certification. Body material: gray cast iron EN-GJL-250. Disc material: nickel-coated spheroidal cast iron EN-GJS-400-15. Stem material: stainless steel AISI 416. Lever material: aluminum. Disc and stem sealing: EPDM. Connection: flange PN6 for DN40 ÷ DN150 and DN300, PN10/PN16 for DN32 ÷ DN300, ASA150 for DN40 ÷ DN300, JIS 10K for DN40 ÷ DN300. Operating temperature: from -15°C to +110°C (temporarily up to +130°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLeft-handed bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The left-handed OML clamp is intended for mounting CLIP type hoses (hoses of this type are made from impregnated fabric, and the left-wound spiral is made from sheet metal and steel wire) e.g., KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple grip without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with external thread, for NiTO I gun. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4354 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP parallel/GSP tapered. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsButterfly valve, between-flange, centric, WAFER type, intended for industrial gas installations, in pressure class MOP5. It can be opened and closed manually or by a pneumatic actuator. The handle positions the valve in 9 positions: "open," "closed," and intermediate positions. It meets the requirements of the PED directive 2014/68/EU. It has NF ROBGAZ certification for compliance with standards EN 13774 and EN 549. Body material: ductile iron EN-GJS-500-7, coated with epoxy 250 ÷ 300 µm. Disc material: stainless steel CF8M (up to DN100), ductile iron EN-GJS-500-7 (from DN125). Stem material: stainless steel AISI 420. Lever material: aluminum. Disc and stem sealing: NBR. Connection: flange PN10/PN16 for DN32 ÷ DN200, ASA150 for DN40 ÷ DN200. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve type 2280 intended for industrial installations, can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve can be installed in any position, according to the flow direction indicated on the body. Maximum constant working pressure across the full temperature range. Body material: brass. Spring material: AISI 302 steel. Disc: POM. Disc sealing: NBR. Connection: BSP thread. Operating temperature: from -10°C to +90°C. Minimum opening pressure: 0.02 bar for 3/8" to 2.1/2"; 0.1 bar for 3" to 4".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene. Levers: AISI 304 steel. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable hand pliers designed for the installation of CAW-type or similar hose ties (with 1 or 2 "ears"). The jaw profile allows for easy and reliable front and side clamping.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble loop band with built-in Band-It® Ultra-Lok® fastener made of AISI 201 steel designed for the most demanding applications. The double loop increases the strength of the clamp. The smooth surface of the band and its proper installation on a non-corrugated hose create a tight fitting of the end, preventing leaks into the clamp. Installation using electric tools BD-UL9010 or BD-UL4000B. For mounting 1/2" clamps to the mounting device, a BD-M09387 adjustment washer should be used. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with internal thread. Supplied with an adapter for thread conversion. NiTO CLICK quick couplings are water quick couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
