Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality thin-walled BARRIER hose for refrigerant flow in a single polyester braid for use in automotive and industrial air conditioning and refrigeration systems operating on R134a, R1234yf, R404a Suva MP52, and R22 mineral and synthetic oils PAG, POE, and PVE. The outer layer is resistant to abrasion and weather conditions. Standards: SAE J2064 type C class I. Inner layer: black CR rubber separated by a nylon (PA) layer. Reinforcement: polyester braid. Outer layer: black CIIR rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -35°C to +125°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality BARRIER type refrigerant hose (thick-walled) designed for automotive and industrial cooling and air conditioning systems operating on R134a, R12, R404a Suva MP52, and R22 refrigerants with mineral and synthetic oils PAG, POE, and PVE. The outer layer is resistant to oil, abrasion, and weather conditions. Standards: SAE J2064 type C class II. Inner layer: black CR rubber, nylon (PA) layer. Reinforcement: two polyester braids. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on hose diameter. Operating temperature: from -30°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality large-diameter refrigerant hose designed for automotive (especially trucks and buses) and industrial refrigeration and air conditioning systems operating on R 134a and R404a refrigerants, as well as mineral and synthetic oils PAG and POE. The outer layer is resistant to oil, abrasion, high temperatures, and weather conditions. Standards: SAE J2064 type B (dimensions SAE 100R5). Installation: use special screwed or clamped fittings. Inner layer: black IIR rubber. Reinforcement: steel braid. Outer layer: black CSM rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -40°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for industrial cooling systems (an alternative to copper tubes) and automotive air conditioning (only for filling and testing functions). Specifically for refrigerants (R22, R134a, R404a, R407c, R410a, R507) and compressor oils of the POE and PAG types. The hose in sizes from 1/12" to 1/4" can also be used for CO2 (R-744) transmission - using CO2 as a refrigerant requires pressures approximately 10 times higher than conventional refrigerants. Inner layer: polyamide (PA), for diameters from 1/12" to 1/4" a PA and TPE (thermoplastic elastomer) blend. Reinforcement: polyester braid. Outer layer: micro-perforated, abrasion-resistant polyurethane. Working pressure: from 45 bar to 120 bar, depending on hose diameter. Operating temperature: from -45°C to +130°C (for water and air up to +70°C).
