Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug-in partition fitting, type R10, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut for socket couplings designed for joining hoses made of soft plastics. The connection occurs by fitting the hose onto the end and tightening it by screwing the nut. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety ring to prevent unintentional disconnection for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum) with outer diameters from 12 mm to 28 mm. Material: plastic. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBistable 3-position switch VRM-313 N with short lever for VME valve. VME1-000 adapter required for installation. Color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch 2x internal BSP thread 1x external BSPT thread type A24, intended for connecting pneumatic elements (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-type through plug connector, type R22, designed for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Available in colors: natural, black, blue, red, yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 19 bar to 28 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -40°C to +80°C (for water-based media +70°C). Standard: SAE J 844 (diameters from 1/8" to 5/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version finished with plug-in couplings on both sides (hose - hose). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGA connection set, used for connecting individual components of the compressed air preparation installation series G. The set includes a coupling and 2 screws. Available in shapes: "L", "T", and "U". Supply pressure: up to 10 bar. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP type A9 elbow with internal thread intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini double-acting cylinder ISO 6432 STD, type 110, without magnet, without cushioning. It is designed to operate with filtered oil-lubricated or non-oil-lubricated air and does not require additional maintenance. The cylinder is made with a stainless steel sleeve. The dimensions of the outer covers for certain diameters have been reduced, allowing for installation in confined and restricted spaces. The lifespan of cylinders with NBR seals is 15 million cycles, with polyurethane seals 30 million cycles. The presented values should not be considered binding or guaranteed, but only as a reference due to the variability of many factors, including radial and axial loads, speed, temperature, or air losses (limit values). Piston diameter: Ø 8, 10, 12, 16, 20, and 25 mm. Stroke length: from 5 to 500 mm. Operating pressure: from 0.8 to 10 bar (Ø 8, 10, 12 mm); from 0.6 to 10 bar (Ø 16, 20, 25 mm). Sealing: polyurethane, NBR, FKM/FPM. Operating temperature: from -10°C to +150°C depending on the seal used.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Particularly recommended for industrial or automotive installations of hot fluids (fuels, oils, refrigerants) or air, excluding water. Available only in black. Hose material: modified polyamide PPA. Working pressure: from 10 bar to 44 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -40°C to +150°C (for water-based media +70°C). Standard: DIN 73378, ISO 7628.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe LAM L pressure indicator in the version with couplings on both ends (hose - hose) is used to signal (green or orange signal) the aeration of the system; when the system is vented, the signaling sight glass is "empty." Operating pressure: 2 ÷ 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow push-fit connector for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDispenser cover CVL intended for the SKILLAR system series 100-200-300-400 and series BIT.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° adjustable angled plug connector with external thread, type R34, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPipe and hose cutting scissors with a diameter of 4 ÷ 32 mm. Replacement blades are available for sale under the index JG-TS32EK.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBistable 2-position switch VRM-300 N with short lever for VME valve. VME1-000 adapter is required for installation. Color: black.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-shaped tee 2x internal BSP thread, 1x external BSPT thread type A13, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyethylene and aluminum pneumatic hose for use in pneumatic control systems. Very good chemical resistance of the outer layer allows operation in chemically aggressive environments. The reinforcement in the form of an aluminum coating increases the hose's durability, enabling the installation of long sections without additional supports. An additional advantage is its so-called shape memory, allowing installation in hard-to-reach places. It can operate buried without the need for additional coverings. Due to its unique construction, the hose is about 5 times lighter than standard pneumatic hoses. Inner layer: polyethylene. Reinforcement: aluminum. Outer layer: black polyethylene. Working pressure: from 20 bar to 28.8 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with both ends terminated with plug couplings (hose - hose), discharge routed through the plug coupling. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter tank and filter-reducer for the BIT system 1/8" and 1/4". Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector, type R4, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external and internal BSP thread type A5/Z, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature angular pressure reducing valve type RMC (threaded connection with an O-ring at the inlet and a plug connection at the outlet) ensures the parallelism of the pipe relative to other installation components due to its geometry. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSVL silencer with throttling and external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 25 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing tee for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible double hose used in pneumatic systems, hydraulic systems, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Maintains flexibility at low temperatures. Shore hardness (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on hose diameter). Operating temperature: from -40°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAssembly kit for the BIT system (2 plates + 2 screws). Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector with plug connections for hoses with metric diameter, series S, type PULM. An economical solution for connecting flexible pneumatic hoses with a calibrated external diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with external and internal BSP thread type A25, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). By pushing the fitting into the coupling, we obtain the possibility of connecting to the installation with an internal thread. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFLAMEX PS safety spiral.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInline "Y" plug connector, type R23, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFP filter element, BIT system 1/8" and 1/4". Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric plug 30 mm standard for PIV valve, for panel mounting. Cable diameter: PG11. Color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type A15 elbow with external thread intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are used. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight coupling, type R21, designed for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWall mounting bracket for the SPEEDFIT system used in compressed air installations. 90° angled coupling mounted to the wall. One side finished with a fitting for a tube (SPEDDFIT system), the other side has an internal BSP thread. Material: brass. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSCQ silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable through the installation of the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 35 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: up to 12 bar.
