Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe electric valve SOV L belongs to the LINE ON LINE® family, finished with Fox series couplings (hose-to-hose) and can be connected with other products in series or parallel. Despite its small size, SOV L valves are electrically controlled indirectly, which gives them very high operating parameters. Special polyurethane seals embedded on the shaft ensure a long lifespan of the valve. The exhaust air can be silenced by a built-in silencer. Each valve has monostable manual control and an activation indicator – an LED. Operating pressure: 2.5 ÷ 7 bar. DC voltage: 24V. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled. Nominal flow: 380 l/min - Ø6, 700 l/min - Ø8 (at an inlet pressure of 6 bar Δp = 1 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 30 mm O8 for solenoid valves CNOMO 060580. Insulation class: F155. Voltage tolerance: -10% to +10%. Protection degree: IP65 EN60529 with connector. Connector shape: DIN 43650 shape A. Continuous duty cycle: 100% ED.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe CMPC series compact actuator, with an externally threaded piston rod, features a lightweight design and short installation length, allowing for mounting in hard-to-reach places. The special profile of the actuator is connected to the outer covers using screws, ensuring optimal axial stiffness and increasing the variety of mounting options. It is equipped with a magnet embedded in the piston, and grooves in the profile allow for the use of magnetic sensors without additional accessories. Manufactured according to ISO 15552 standard. This standard enables easy and quick selection and replacement of the actuator during machine maintenance work. Piston diameter: Ø 32 ÷ Ø 100. Actuator type: double-acting, double-acting with a through piston rod, and single-acting. Piston rod material: C45 chrome-plated steel or stainless steel. Minimum operating pressure: 0.4 ÷ 0.6 bar, depending on the diameter. Maximum operating pressure: up to 10 bar. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-reduction tee connector with plug-in connections for hoses with metric diameter, series S, type PUTM. Economic solution for connecting flexible pneumatic hoses with calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP type A8 blind plug with internal thread intended for pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPipe end cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type U throttling check valve (plug-in connection at the inlet and threaded connection with an O-ring at the outlet, to the valve) regulates the flow of air passing in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSquare-type proximity sensor SQ for actuators features secure and quick mounting using an eccentric screw, the possibility of installation with a screwdriver and a 2.5 mm hex key, stop edges that stabilize the sensor during installation, increased resistance to weather conditions and moisture (IP 67, IP 68, IP 69K). Sensor housing material: polyamide (PA). Supply voltage: 5 ÷ 30V AC/DC (10 ÷ 30V AC/DC - HALL). Operating temperature: from -30°C to +80°C (from -5°C to +80°C - dynamic installations).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat monostable button VRM-010 RN for VME valve. VME1-000 adapter is required for installation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "T" 2x internal BSP thread, 1x external BSPT thread type A12, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. For tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable "T" plug connector with external thread, type R32, intended for connecting hoses and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMulti-hose in an external cover made of black polyurethane, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Different colors of hoses allow for easy identification of individual power circuits or different media. Number of hoses: 2. Hose material: polyamide PA 12 (nylon). Working pressure: from 7.5 bar to 33 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -20°C to +80°C (for fluids containing water up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control dividing valve (solenoid valve), without control coil, commonly used for actuator control. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDistributor block type A21 with internal threads (four-way). It has threaded connections designed for connecting pneumatic components. Distributor material: technopolymer. Connection material: brass. Working pressure: 13 bar. Operating temperature: +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFork head for mounting on the piston rod of the actuator. For use in cases of loads not aligned with the axis of the actuator's piston rod. The fork head provides greater mounting options. Thread: M4 ÷ M36x2. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpare blade for JG-TS32 scissors.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMonostable mushroom button VRM-050 R for valve VME. Color: red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-shaped tee connector with plug connections for hoses with metric diameter, series S, type PYM. An economical solution for connecting flexible pneumatic hoses with calibrated metric outer diameter. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve with actuator assistance for panel control. Most commonly used for controlling actuator operation. An MW-035100005 adapter is always required during installation. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details22 mm coil UL and CSA for PIV.I valves, shaft O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 EN60529 with connector.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way coupling with internal BSP threads type A14 intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO bracket for mounting with a swivel flange. Included: 4 screws with washers. Material: cast aluminum (flange), galvanized carbon steel (screws and washers).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF NMC series COMPACT "N" for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing plug connector, type R8, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDischarge silencer MWDSE with external thread used in compressed air systems to reduce noise intensity. Material: nickel-plated brass. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsArticulated head for mounting on the piston rod of the actuator. For use in cases of loads not aligned with the axis of the actuator's piston rod. The articulated head provides greater mounting options. Thread: M4 ÷ M36x2. Material: galvanized carbon steel (head), steel (joint).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped "T" fitting with external BSPT threads type A16, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is needed; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control dividing valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled plug connector, adjustable double with external thread, type R50, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWobble flange with double ear for mounting on the rear part of the actuator cover, with a pin. Allows for the movement of the pneumatic actuator during operation. Included: 4 screws with washers, 1 pin, 2 retaining rings. Material: cast aluminum (flange), steel + bronze + PTFE (bushing), galvanized carbon steel (screws and washers), galvanized carbon steel (pin), stainless steel (retaining ring).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal valve type 6560 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products. Material: body - nickel-plated brass, ball: chrome-plated brass. Sealing: ball - Teflon, spindle - NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable 90° angle connector with external thread, type R15, designed for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSTT silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 32 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTrunnion "T" 2x external BSPT thread, 1x internal BSP thread type A17, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is used; for a cylindrical thread, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReplacement seal kit for actuator ISO 15552 version: STD, TYPE A, SERIES 3. Material: NBR. Diameter: 32 ÷ 125.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature valve designed for pneumatic installations, with plug connections for direct mounting on hoses with calibrated outer diameters. Functionally similar to a ball valve (flow closure by rotating the knob 90º), it is, however, a miniature three-way sliding valve (3/2) with venting – it must be installed according to the flow direction indicated on the body. When the power supply is cut off, the system downstream of the valve is vented through openings located at the top of the knob, allowing for repairs and maintenance of the system. Body material: plastic. Slider material: brass. Seals: NBR o-ring. Operating temperature: from 0°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / Details"L" fitting 2x external BSPT thread, 1x internal BSP thread type A18, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug designed for flexible pneumatic hoses in metric dimensions, series S, type PPFM. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way coupling 3x internal BSP thread, 1x external BSPT thread type A20, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is needed; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
