Is the BANJO adapter with metric male thread, carbon steel, type R-G-L compatible with standard 24Â° cone sealing hydraulic ports?

Yes. The BANJO adapter with metric male thread, carbon steel, type R-G-L (24Â° cone sealing) is compatible with standard 24Â° cone sealing hydraulic ports. Because the adapter features an external metric male thread combined with a 24Â° cone sealing face, it is designed to mate directly with ports and fittings that use the ISO 8434-1 / DIN 3863-style 24Â° cone sealing geometry. Ensure that thread size and pitch match the port specification and that required sealing elements (e.g., O-ring if specified by the port standard) are used. Also verify material and galvanization meet system pressure, fluid, and corrosion-resistance requirements.

Does the BANJO adapter with metric male thread, carbon steel, type R-G-L require additional sealing washers for 24Â° cone connections?

No. The BANJO adapter with metric male thread, carbon steel, type R-G-L does not require additional sealing washers for 24Â° cone connections. It uses the integrated 24Â° cone sealing face on the external metric thread to achieve metal-to-metal sealing when properly torqued; no separate washer is needed. Ensure correct torque and that mating surfaces are clean and undamaged for reliable leak-free joints.

Can the BANJO adapter with metric male thread, carbon steel, type R-G-L be used in high-pressure hydraulic systems with 24Â° cone sealing?

Yes. the BANJO adapter with metric male thread, carbon steel, type R-G-L (24Â° cone sealing) can be used in high-pressure hydraulic systems, provided the following conditions are met: 1. Pressure rating: Verify the adapterâs rated maximum working pressure from the manufacturer or product datasheet. Carbon steel banjo fittings with 24Â° cone sealing are commonly used in high-pressure hydraulics, but actual suitability depends on the specific pressure class (e.g., 250 bar, 400 bar, etc.). 2. Thread and sealing compatibility: Ensure the metric male thread and 24Â° cone sealing geometry match the mating component (port or hose fitting). Proper cone seating and correct torque are essential to achieve leak-free operation. 3. Material and surface protection: Carbon steel (galvanized) offers good strength for high pressure, but confirm corrosion resistance is adequate for the application environment. Galvanization provides some protection, but for aggressive fluids or environments stainless steel may be preferred. 4. Fluid compatibility and temperature: Confirm the adapterâs compatibility with the hydraulic fluid and operating temperature range; extreme temperatures or aggressive fluids can affect seals and material performance. 5. Installation and safety: Use correct sealing elements (e.g., O-rings, backup rings if required), follow recommended tightening torques, and comply with system safety factors. Inspect for damage and perform pressure testing after installation. If the adapterâs documented pressure rating, thread/cone match, fluid and temperature compatibility, and installation practices all align with your system requirements, then the BANJO adapter with metric male thread, carbon steel, type R-G-L (24Â° cone sealing) is suitable for use in high-pressure hydraulic systems. Otherwise, choose a fitting with verified ratings for your specific application.

BANJO adapter with a metric male thread, carbon steel, type R-G-L

All products, Low-pressure fittings and adapters/

Additional information

Material	CS – steel (cast iron)

BANJO adapter type R-G-L with a metric male thread, 24° cone seal. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EC-106952	Adapter BANJO R-G-L 10 mm, M12x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106954	Adapter BANJO R-G-L 12 mm, M14x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106956	Adapter BANJO R-G-L 14 mm, M14x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106958	Adapter BANJO R-G-L 14 mm, M16x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106960	Adapter BANJO R-G-L 16 mm, M18x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106961	Adapter BANJO R-G-L 18 mm, M18x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106962	Adapter BANJO R-G-L 18 mm, M22x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106963	Adapter BANJO R-G-L 22 mm, M26x1.5 male, 24° cone	-	30	In stock	Enquiry
EC-106964	Adapter BANJO R-G-L 22 mm, M22x1.5 male, 24° cone	-	30	In stock	Enquiry