Is the Straight connector with GW BSP, PVDF, 3F series compatible with common laboratory tubing and fittings for pressures up to 10 bar?

Yes. The Straight connector with GW BSP, PVDF, 3F series is compatible with common laboratory tubing and fittings for pressures up to 10 bar. The product is an internal threaded BSP (G) coupling from the 3F series (type EM), designed for broad laboratory and industrial use (medicine, pharmaceutical, chemical, food). Made of PVDF (with polypropylene variants noted), it is intended for fluid handling applications and rated for a working pressure of 10 bar, matching typical lab tubing and BSP-threaded fittings used at those pressures. Ensure tubing inner diameter and BSP thread size match the connector specifications and verify chemical compatibility with PVDF for your fluid and temperature conditions before use.

Can the Straight connector with GW BSP, PVDF, 3F series withstand chemical sterilization methods used in pharmaceutical labs?

Straight connector with GW BSP, PVDF, 3F series is suitable for many laboratory and pharmaceutical applications due to its PVDF construction and 10 bar working pressure. PVDF offers excellent chemical resistance and tolerates common sterilization methods used in pharma labs, including steam autoclaving (check temperature limits), chemical sterilants (e.g., peracetic acid, hydrogen peroxide) and many solvents. However, compatibility depends on sterilization temperature, exposure time and specific agents; repeated high-temperature autoclaving or aggressive oxidizers may affect seals or any polypropylene components in the coupling. Verify with manufacturer data for exact temperature limits, compatibility charts and whether seals/gaskets are of a sterilization-grade material before use in validated chemical sterilization processes.

Does the Straight connector with GW BSP, PVDF, 3F series meet food-industry hygiene and safety standards?

Based on the provided description, the Straight connector with GW BSP, PVDF, 3F series is designed for use across laboratories, medicine, pharmaceutical, chemical, and food industries and is made from PVDF (polyvinylidene fluoride) and polypropylene. These materials are commonly used in hygienic and aseptic applications because PVDF is chemically resistant, has low extractables, and can withstand cleaning and sterilization processes; polypropylene is also widely accepted for food contact. However, the description alone does not confirm formal compliance with specific food-industry hygiene and safety standards (for example, FDA 21 CFR 177.1570, EU Regulation 10/2011, EC 1935/2004, NSF, or relevant sector-specific hygienic design standards). Certification or declarations of conformity, traceability of materials, surface finish specifications (smoothness, absence of crevices), and any sanitary design features (e.g., butt joints, polished surfaces, ease of disassembly for cleaning) are typically required to demonstrate full compliance. Conclusion: The Straight connector with GW BSP, PVDF, 3F series uses materials appropriate for food-industry use and is marketed for that sector, suggesting it can meet hygiene and safety needs in many applications. To confirm formal compliance for your specific regulatory or audit requirements, request from the supplier: material safety data/certificates (e.g., FDA/EU food-contact declarations), test/certification documents (NSF, EC/FDA), surface finish and lot traceability, and any sanitation/cleaning validation.

Straight connector with GW BSP, PVDF, 3F series

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Internal threaded BSP coupling, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3F144GG12PP	Straight connector (coupling) (series 3F) with G thread BSP 1/2", polypropylene	-	10	In stock	Enquiry
EM-3F144GG12PV	Straight connector (coupling) (series 3F) with G thread BSP 1/2", PVDF	-	10	In stock	Enquiry
EM-3F144GG14PP	Straight connector (coupling) (series 3F) with G thread BSP 1/4", polypropylene	-	10	In stock	Enquiry
EM-3F144GG14PV	Straight connector (coupling) (series 3F) with G thread BSP 1/4", PVDF	-	10	In stock	Enquiry
EM-3F144GG18PP	Straight connector (coupling) (series 3F) with G thread BSP 1/8", polypropylene	-	10	In stock	Enquiry
EM-3F144GG18PV	Straight connector (coupling) (series 3F) with G thread BSP 1/8", PVDF	-	10	In stock	Enquiry
EM-3F144GG38PP	Straight connector (coupling) (series 3F) with BSP 3/8" thread, polypropylene	-	10	In stock	Enquiry
EM-3F144GG38PV	Straight connector (coupling) (series 3F) with G thread BSP 3/8", PVDF	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Internal threaded BSP coupling, series 3F type EM, has wide applications in laboratories, medicine, pharmaceutical, chemical, and food industries. Material: polypropylene, PVDF. Working pressure: 10 bar.