What is the recommended temperature range for the DIN 3015 standard insert, rubber, type 101 used in two-part clamp assemblies?

The recommended operating temperature range for the DIN 3015 standard insert, rubber, type 101 used in two-part clamp assemblies is -40Â°C to +80Â°C.

How should the DIN 3015 standard insert, rubber, type 101 be cleaned and maintained to ensure long-term performance?

To clean and maintain the DIN 3015 standard insert, rubber, type 101 for long-term performance: - Regular inspection: check monthly for cracks, hardening, cuts or deformation and for secure seating in the clamp. - Cleaning: remove pipe and wipe the rubber surface with a soft cloth dampened with mild soap solution or isopropyl alcohol (max 70%). Avoid aggressive solvents (ketones, strong hydrocarbons) that swell or degrade rubber. - Rinse and dry: after cleaning with soap, rinse with clean water and dry completely before reassembly to prevent trapped moisture. - Lubrication: if needed for installation use a thin film of compatible silicone-based or water-soluble lubricant; avoid petroleum-based oils. - Storage: keep spares in cool, dark, dry conditions between -20Â°C and +25Â°C, away from ozone sources and direct sunlight. - Temperature use: operate within -40Â°C to +80Â°C; avoid prolonged exposure near limits to prevent accelerated aging. - Replacement: replace when signs of permanent deformation, significant hardening, cracking or loss of grip appear.

Can the profiled surface of the DIN 3015 standard insert, rubber, type 101 be customized for different pipe materials?

Yes. the profiled (grooved) surface of the DIN 3015 standard insert, rubber, type 101 can be adapted for different pipe materials, but within practical and material limits. Key points: - Purpose of profiling: Grooves and profiles are intended to improve grip, protect the pipe surface, and accommodate variations in pipe diameter and finish (smooth, coated, corrugated). Different pipe materials (steel, stainless steel, copper, plastic, coated pipes) may require different groove depth, spacing or softer/harder rubber contact to avoid damage or slippage. - Customization options: Manufacturers can alter groove geometry (depth, pitch, shape), surface texture, and rubber compound hardness (durometer) to suit the pipe material and application. For delicate or easily scratched surfaces (polished stainless steel, plated or painted pipes), shallower or smoother profiles and softer elastomers are used. For slippery or oily surfaces, deeper or more aggressive profiles and higher-friction compounds may be selected. - Constraints: Any modification must remain compatible with the insertâs operating temperature range (â40Â°C to +80Â°C) and overall dimensions specified by the DIN 3015 clamp system to ensure fit and function. Extreme changes in profile or material may affect load distribution, longevity, chemical resistance, and compliance with the intended DIN clamp performance. - Recommendation: Specify the pipe material, surface condition (polished, painted, galvanized, plastic), diameter tolerance, and service conditions (temperature, chemicals, vibration). Discuss with the supplier/manufacturer to choose an appropriate groove design and rubber compound while ensuring the insert still meets DIN 3015 mounting and performance requirements. In summary: Yes. profile customization is feasible and commonly done to protect and secure different pipe materials, provided the insertâs dimensions, temperature limits (â40Â°C to +80Â°C) and functional requirements are respected.

Insert DIN 3015 standard, rubber, type 101

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)
Standard length [m]	10, 15, 2, 25, 7.5

A two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: rubber. Operating temperature: from -40°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-RB101-106,4X	Insert DIN3015 standard RB for a 6.4 mm pipe	-	-	In stock	Enquiry
TC-RB101-106X	Insert DIN3015 standard RB for a 6 mm pipe	-	-	In stock	Enquiry
TC-RB101-108X	Insert DIN3015 standard RB for a 8 mm pipe	-	-	In stock	Enquiry
TC-RB101-109,5X	Insert DIN3015 standard RB for a 9.5 mm pipe	-	-	In stock	Enquiry
TC-RB101-110X	Insert DIN3015 standard RB for a 10 mm pipe	-	-	In stock	Enquiry
TC-RB101-112X	Insert DIN3015 standard RB for a 12 mm pipe	-	-	In stock	Enquiry
TC-RB101-212,7X	Insert DIN3015 standard RB for a 12.7 mm pipe	-	-	In stock	Enquiry
TC-RB101-213,5X	Insert DIN3015 standard RB for a 13.5 mm pipe	-	-	In stock	Enquiry
TC-RB101-214X	Insert DIN3015 standard RB for a 14 mm pipe	-	-	In stock	Enquiry
TC-RB101-215X	Insert DIN3015 standard RB for a 15 mm pipe	-	-	In stock	Enquiry
TC-RB101-216X	Insert DIN3015 standard RB for a 16 mm pipe	-	-	In stock	Enquiry
TC-RB101-217,2X	Insert DIN3015 standard RB for a 17.2 mm pipe	-	-	In stock	Enquiry
TC-RB101-218X	Insert DIN3015 standard RB for a 18 mm pipe	-	-	In stock	Enquiry
TC-RB101-219X	Insert DIN3015 standard RB for a 19 mm pipe	-	-	In stock	Enquiry
TC-RB101-319X	Insert DIN3015 standard RB for a 19 mm pipe	-	-	In stock	Enquiry
TC-RB101-320X	Insert DIN3015 standard RB for a 20 mm pipe	-	-	In stock	Enquiry
TC-RB101-321,3X	Insert DIN3015 standard RB for a 21.3 mm pipe	-	-	In stock	Enquiry
TC-RB101-322X	Insert DIN3015 standard RB for a 22 mm pipe	-	-	In stock	Enquiry
TC-RB101-325,4X	Insert DIN3015 standard RB for a 25.4 mm pipe	-	-	In stock	Enquiry
TC-RB101-325X	Insert DIN3015 standard RB for a 25 mm pipe	-	-	In stock	Enquiry
TC-RB101-426,9X	Insert DIN3015 standard RB for a 26.9 mm pipe	-	-	In stock	Enquiry
TC-RB101-428X	Insert DIN3015 standard RB for a 28 mm pipe	-	-	In stock	Enquiry
TC-RB101-430X	Insert DIN3015 standard RB for a 30 mm pipe	-	-	In stock	Enquiry
TC-RB101-432X	Insert DIN3015 standard RB for a 32 mm pipe	-	-	In stock	Enquiry
TC-RB101-532X	Insert DIN3015 standard RB for a 32 mm pipe	-	-	In stock	Enquiry
TC-RB101-533,7X	Insert DIN3015 standard RB for a 33.7 mm pipe	-	-	In stock	Enquiry
TC-RB101-535X	Insert DIN3015 standard RB for a 35 mm pipe	-	-	In stock	Enquiry
TC-RB101-538X	Insert DIN3015 standard RB for a 38 mm pipe	-	-	In stock	Enquiry
TC-RB101-540X	Insert DIN3015 standard RB for a 40 mm pipe	-	-	In stock	Enquiry
TC-RB101-542,4X	Insert DIN3015 standard RB for a 42.4 mm pipe	-	-	In stock	Enquiry
TC-RB101-542X	Insert DIN3015 standard RB for a 42 mm pipe	-	-	In stock	Enquiry
TC-RB101-545X	Insert DIN3015 standard RB for a 45 mm pipe	-	-	In stock	Enquiry
TC-RB101-644,5X	Insert DIN3015 standard RB for a 44.5 mm pipe	-	-	In stock	Enquiry
TC-RB101-648,3X	Insert DIN3015 standard RB for a 48.3 mm pipe	-	-	In stock	Enquiry
TC-RB101-650,8X	Insert DIN3015 standard RB for a 50.8 mm pipe	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A two-part insert of a DIN 3015 type 101 clamp, made in accordance with the DIN 3015 standard. As standard, it has a profiled (grooved) surface of the pipe hole. Material insert: rubber. Operating temperature: from -40°C to +80°C.