Is the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 compatible with deionized water systems and safe at up to 8.3 bar and 0â71Â°C?

Yes. The Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 is described specifically for deionized water filtration and washing installations, is made of polypropylene with EPDM Oâring sealing, and its rated working pressure (up to 8.3 bar) and operating temperature range (0â+71Â°C) match your stated limits . so it is compatible with deionized water systems and safe to use up to 8.3 bar and 0â71Â°C.

Does the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 require special maintenance when used with deionized water at up to 8.3 bar?

The Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 does not require special maintenance beyond standard good practice when used with deionized water up to 8.3 bar. Recommended actions: - Inspect EPDM Oâring periodically for swelling, cracking or hardening and replace if degraded. - Check threads, valve operation and hose connection for leaks; tighten or re-seat as needed. - Flush periodically to prevent particulate buildup; avoid aggressive cleaners that can attack polypropylene or EPDM. - Operate within specified temperature (0â71Â°C) and pressure limits (â¤8.3 bar). - Store and install to avoid prolonged UV exposure and contact with incompatible chemicals. Following these measures will ensure reliable service without special maintenance regimes.

Can the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 be used for leak detection in deionized water systems?

Yes. the Bulkhead connector for hose, with valve, polypropylene, PLC series DN 6.3 is appropriate for leak detection in deionized water systems, with some practical limits. Why it fits: - Application description explicitly lists leak detection as an intended use. - Materials are compatible: polypropylene body resists deionized water chemistry; EPDM Oâring provides reliable sealing for aqueous systems. - Pressure and temperature ratings cover typical leakâtest conditions: up to 8.3 bar and 0Â°C to +71Â°C, adequate for most laboratory and industrial leak checks. - Medium-sized quick coupling and integrated valve simplify connection/disconnection and controlled isolation during testing. Considerations and limitations: - Confirm system operating pressure and temperature remain within the stated limits (â¤8.3 bar, 0â71Â°C). - EPDM is generally suitable for deionized water but verify against any aggressive additives, solvents or highâpurity requirements (e.g., ultraâpure water applications may require different elastomers or metal fittings to avoid contamination). - For very low leakârate detection or high vacuum/negative pressure tests, ensure the couplingâs sealing performance meets detection sensitivity; quick couplings can have higher permeation/leak paths than welded or compression fittings. - Check for compatibility with your fluid cleanliness standards and any regulatory/material traceability requirements. In summary: suitable for routine leak detection in deionized water systems within the specified pressure/temperature range and provided EPDM and polypropylene meet your purity and compatibility needs.

Plug bulkhead quick coupling for hose, with valve, polypropylene, series PLC DN 6.3

All products, Industrial plastic quick couplings/

Additional information

Material	P – material (plastic)

Medium size plug bulkhead quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L – total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CC-PLV-28-PP	Plug PLC DN6.4 for hose 1/4", with a valve, bulkhead, polypropylene	-	8.3	In stock	0 zł		Enquiry
CC-PLV-30-PP	Plug PLC DN6.4 for hose 3/8", with a valve, bulkhead, polypropylene	-	8.3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Medium size plug bulkhead quick coupling with fitting for hose intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L – total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: from 0°C to +71°C.