Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpigot with a thread external for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). pushing spigot in coupling obtain possibility connecting for installation a thread external. Material: brass. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature pressure-reducing valve type RML (push-in connection at the valve inlet and outlet), intended to reduce a higher pressure to a lower pressure downstream of the valve. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut type UM with a metric or BSP thread, similar to DIN 3870, for S and SF type spigots. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnreinforced and very flexible hose with transparent PVC intended for pressureless (or under very low pressure) conveying water, beer, wine, alcohols with a concentration up to 20%, juices, drinks, other liquids food. Not is recommended for milk and products milk and for oils and greasy substances food. used also for liquids in use general-industrial, for light chemicals (e.g. diluted acids and bases) and as A guard pipes, lines, cables etc. For the hose, the stated pressure value is the approximate value of the recommended working pressure, assumed for a typical PVC hose, at a safety factor of 5:1. Use of the hose at a specific working pressure should be preceded by a test under operating conditions. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to a few bar, depends on temperature. Operating temperature: from -5°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutter for hoses plastic o diameters in the scope 3 ÷ 12 mm. color: orange.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp for mounting panel for pressure gauge type FM 632 with rear connection.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible A braid steel, used for securing hoses against damage mechanical, abrasion and temperature. ensures also increase ich strength at elevated pressure. can be clamped a clamp crimp or sleeves. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutting ring, type B11, for connecting copper pipes and plastic hoses to type B fittings. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P20 CS Powered is motor electric 1.6 kW o voltage 12 V or 2.2 kW o voltage 24 V, powered with battery, Intended in particular for equipment cars service and vehicles technical. Diameter crimp set knob micrometric. indicator reaching diameter crimp, signalled is electrically using indicator light LED. press occurs in two versions in which head crimping can be placed po right or left side. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWidely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric and abrasion. Not is resistant to oil, not recommended also for air with mist oil. W comparison with a hose "Tubes 2116" has thicker wall. Inner layer: white EPDM rubber. Reinforcement: a polyester braid. Outer layer: red or blue EPDM rubber micro-perforated. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled connector with a BSPT male thread type AI 13280 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO bolt with O-rings, type D7, for type R28, R29 fittings. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-vulcanizing tape silicone PYROSIL used for sealing cover PYROJACKET and tape PYROTAPE. Nie has layer adhesive, ale overlapping na each other or na PYROJACKET or PYROTAPE vulcanizes in several seconds. resistant na radiating heat, moisture and vibration. Ze regard na very good strength dielectric, is suitable na insulator electric. at mounting recommended is overlap 50% and clean, dry surface. Nie is recommended for contact with flame and splashes molten metal. Material: silicone in color rust. Operating temperature: up to +246°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection Tee "T" with a male BSP threadT, made entirely of steel AISI 316L, series 60210. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee through-flow, series F type R 5 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn O-ring gasket, type F.3, for a FERRARI coupling socket. Material: rubber SBR/NR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA profile gasket for a TW (tankwagen) coupling, type GSD (for a 4" coupling, an O-ring gasket type TWO is used). Material: hypalon (SCM). Temperature range (approximate): from -20°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream, flexible hose chemical o multilayer the structure designed specially, to connect resistance chemical with high service life in pump peristaltic. smooth Layer inner o very sound resistance chemical, free of plasticizers, resistant na acids, bases, salts, alcohols and ketones, o low absorption and adsorption liquids na base water. Layer outer with thermoplastic elastomer (Norprene®) ensures excellent properties and high service life at use in pump peristaltic. hose meets requirements hygienic and for contact with food: American FDA 21 CFR 177.1520 and is resistant na most agents cleaning and disinfecting. sterilization steam, oxide ethylene or radiation. perfectly is suitable for dosing soaps and detergents, agents washing and for rinsing vessels. used for production and dosing various chemicals we all fields industry. Length of a full hose roll 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). temperature use: from -60°C to +74°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 250 bar to 420 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose SILICONE 1, o two layers fabric coated silicone and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for extraction gases in industry metallurgical, foundry, industry glass and ceramic, for hot air in dryers industrial, in printing houses and paper mills, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. not recommended for continuous dynamic bending. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass coated red silicone. Reinforcement: spiral with wire steel, double outer cable with fibre glass. Operating temperature: od -70°C up to +250°C (momentarily up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible hose with a calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication and chemical systems. compliant with the standard DIN 73378. Available in colours: natural, blue. Hose material: polyamide PA 12 (nylon). Working pressure: from 11 bar to 40 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -10°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, bursting and kinking spiral hose intended for installations pneumatic automotive systems brake. resistant to oil, gasoline, ozone and radiation UV. retains high flexibility at low temperatures. terminated on both sides fitting with a thread external metric. The stated total length is the maximum hose length after stretching. Available in colour yellow and red. Hose material: polyurethane. Material springs: steel galvanised. The permissible Working pressure: 10 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose o smooth surface internal intended for compressed air, water, light chemicals, agents fungicidal, fertilisers and pesticides. commonly used in agriculture for sprinkling, irrigation, spraying. Layer outer resistant to abrasion and conditions atmospheric. Inner layer: black PVC. Reinforcement: a polyester braid (double polyester braid for version REFITTEX 80 BAR). Outer layer: black PVC. Working pressure at a temperature of 20°C: 20 bar (white stripe), 40 bar (blue stripe), 80 bar for diameter internal 13 mm, above 50 bar (red stripe). As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose welding for oxygen and acetylene. made according to standards ISO 3821. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in color red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: od -32°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFree of braid version TO (Tube Only) hose VISIFLON, made with high quality PTFE serrated spirally (clockwise) ensuring exceptional among hoses PTFE flexible, flexibility and resistance na vibration. hose VISIFLON TO can be used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents in conditions very low pressure. standard version VISIFLON TO made is with natural, semi-transparent PTFE, co allows visual control flow. version antistatic VISIFLON TO AS with PTFE with addition carbon (black) ensures discharge and dissipation charges electric for substances and conditions hazard electricity static. Material hose meets requirements FDA (21 CFR 177.1550 for VISIFLON TO, 21 CFR 178.3297 for VISIFLON TO AS). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). assembly hose requires straightening notches na length tail fitting, made na special equipment. fitting can be mounted then through crimping ferrules tube of steel stainless. value pressure working for hose PTFE VISIFLON without braid, applies only for temperatures 100°C, a in case vacuum for temperatures 80°C. above these temperatures occurs drop pressure working and vacuum. assuming use hose above these temperatures should to take into account and carry out appropriate test in conditions use. Material hose: spirally Serrated PTFE (teflon). temperature use: from -70°C to +100°C (up to +230°C). pressure working: from 2 bar to 4 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changing temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 55 bar to 240 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended specially for conveying AdBlue ® (AUS32, DEF) - 32.5% water solution urea. layer inner hose constitutes black, smooth, antistatic (R‹10 6 Ω/m) rubber EPDM vulcanized without content sulfur. Layer inner hose nie is contaminants additives aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel and zinc, co guarantees retention the highest cleanliness medium in accordance with the standard ISO 22241-2. is to particularly important in industry automotive, in which AdBlue ® fully role regulator in order to decomposition in catalyst SCR harmful for environment oxides nitrogen. its use allows na meeting European standards emissions exhaust EURO 4, 5 and 6. liquid AdBlue ®, to was effective, must be very pure, co forces use specialized hoses, tanks and fittings resistant na AdBlue® and non-contaminating go. fitting and fittings for AdBlue ® should be made of steel stainless or appropriate plastic. except for automotive, hose used is also in industry chemical, na example at production fertilizers nitric. Inner layer: black rubber EPDM. Reinforcement: braid synthetic. Outer layer: black rubber EPDM. pressure working: 10 bar or 20 bar. temperature use: from -40°C to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conducting steam saturated, o sound resistance na high temperature, abrasion and ozone. on request Available hose acc. to standards EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM. pressure working: 6 bar. temperature use: from -40°C to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NiTO of AISI 316 stainless steelL with a thread internal BSP. Available in two systems: 1/2″ and 3/4″. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA strong two-screw clamp with a double band and a hinged closure for heavy loads. Two screws and solid pins ensure an accurate and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band 20 mm and 24 mm wide. The rolled edges of the bridges prevent damage to the hose surface. The clamp is marked on the band with the minimum and maximum diameter and the material. Screws are tightened with an Allen key. All components are made of AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press UPS Intended is for crimping using lever manual, hoses o reinforcement textile ferrules sheet-metal type EC. standard equipped is in two sets (po 8 segments clamping) jaws. range use o diameter internal crimped hoses for press UPS-3: DN 3 ÷ 8 (range diameters internal ferrules EC: 8 ÷ 17 mm), DN 10 ÷ 16 (range diameters internal ferrules EC: 18 ÷ 28 mm). Do press exists possibility purchase base o index EC-100250.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality three-way ball valve "L" type BK3L with a thread internal NPT, intended for high-pressure installations hydraulic. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VM45 limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in holes assembly. Material body: aluminum. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 260 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set connection for system SYNTESI type SY1 or SY2. W set available connector and 4 screw.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC on both sides with a thread internal trapezoidal compliant with the DIN EN 12713 standard. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AK swivel coupling with a female BSP thread and a male BSP thread intended for mounting in industrial guns, in particular washing guns at the point of connection to the hose, where, due to operating the gun, its rotation is required. Material: steel AISI 316. Working pressure: up to 30 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting socket systemu STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector PUSH-IN for hose terminated a BSPT male thread or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
