Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Used for installations at lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. resistant to chemicals, safe physiologically, free of taste. Meets BGA and FDA requirements. Available in colour natural, black and blue. Hose material: polyethylene LDPE. Working pressure: from 5 bar to 17 bar, depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine - hose spiral polyamide intended for all kinds equipment pneumatic, systems control, etc. Terminated on both sides with a straight section and ends with a male BSPT thread. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery intended for conveying LPG (molten and gas) and gas natural. Layer outer resistant to action ozone and conditions atmospheric. antistatic (R 6 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. made in accordance with the standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery intended for conveying wine, beer, juices fruit etc. substances food free of fats, requiring the use of rubber free of odour and taste. Contains no phthalates or bisphenol A. Designed for high-class wines and alcohols, for use in breweries and distilleries. Widely used in the spirits industry for conveying strong alcohols with a concentration up to 96%. It has copper wires ensuring electrical continuity between the hose ends, which increases the safety of conveying high-proof, flammable alcohol (during assembly, contact of the wire with the end must be ensured). Layer outer resistant to abrasion, aging and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat.2, D.M. 21/03/73. Inner layer: white rubber butyl (IIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber butyl (IIR). Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose suction-delivery for agriculture, industry food and applications universal. intended water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons). also for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C). Not recommended for milk and dairy products or food substances containing fats and oils. Reinforcement with a rigid-PVC spiral, impact-resistant, provides good resistance to vacuum and kinking of the hose. The outer surface is corrugated, smooth inside. hose AGROFLEX LD complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: green transparent PVC. Reinforcement: white rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6 bar. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hose is made of a smooth, seamless PTFE tube. The PTFE tube of the hose is extruded under strictly defined and controlled conditions, which ensures its highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength na stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose pod high pressure. Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. - as well as for classic high-pressure hydraulic oil installations. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1; if a factor of 4:1 is required (np. acc. to EN 16643) should multiply values through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% na each 1°C above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 55 bar to 240 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Reinforcing insert used for flexible hoses, for AI 13000 type connectors. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn electrical connector for 22 mm coils, cable diameter: PG9. color: black or transparent.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling plug with a thread external BSP with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality three-way ball valve type "L" with threads internal BSP and holes mounting in body, intended for high-pressure installations hydraulic. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShut-off valve type V2V L, two-position, two-way, terminated with push-in connections on both sides (hose - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VM80 limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in holes assembly. Material body: aluminum. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 260 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FPS valve enables free flow of hydraulic fluid in one direction (A → A1) and opening of fluid flow in the opposite direction (A1 → A) provided that a pressure control signal "X" is applied. standard pressure opening flow free (A → A1) 0.5 bar. The required pressure of the control signal "X" for opening flow in the opposite direction (A1 → A) is determined by the product of the actuation coefficient and the pressure on the A1 side. Material: steel galvanized (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with male thread and protective spring, designed for hoses made of soft plastics. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight push-on coupling, type C3, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° with a male BSP thread, series S, type PLM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with a thread external tapered BSPT, series F type R 1C NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with a thread external for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with a thread internal metric and a plug type CAMLOCK A, with gasket, for use np. in tankers railway. Material: aluminum. Sealing: NBR. pressure working: 6 bar. Operating temperature: from -20°C to +30°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBalancer with automatic a lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics, a also helping prevents accidental bleeding, co protects against potential damage. load capacity spring adjustable is using flat wrench. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 2500 mm. thickness cable: 2.5 mm. Operating temperature: up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 16 channel, flat-jet, terminated a thread external 1/4" BSP. ideal for cleaning and cooling. Bez adapter. Material: blue polyamide. pressure Maximum: 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle HYDROJET for lances. Material: steel stainless. Connection: 1/4" NPT male. Working pressure: up to 280 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with fitting for hose, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. The ergonomic shape and large release button provide convenient handling and ease of use. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with a female thread and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils). For the valve, an EPDM O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with a thread internal NPT. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable with each other (different plug diameter), which allows avoiding mistakes in connection. Recognizing the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug has no notch. pressure working: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK B with a BSPT male thread or NPT, made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling socket with "tail" for hose with wide application np.: for transferring and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pressure and vacuum pumps, for building temporary water and air installations in construction, mining and agriculture, and for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of the gasket material. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. Maximum Working pressure: 12.5 bar (for fluids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNRO / VNROHP check valves intended for closing the flow of hydraulic fluid in one direction and opening free flow of fluid in the opposite direction. standard pressure opening 1 bar (also available with other pressure opening od 0.2 bar up to 6 bar). Permissible flow direction: A → A1. Valves type VNROHP equipped are in additional ring sealing allowing na operation at maintaining higher coefficient safety. Material of body and stem: carbon steel with a zinc-nickel coating, stainless steel AISI 316Ti. Sealing: NBR - steel carbon, Viton (FPM) - steel stainless. Operating temperature: from -35°C to +100°C (NBR); from -20°C to +200°C (Viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal orawith a thread external NPT, type 116H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow made of stainless steel, type 62520, with BSP female thread and BSPT male thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow with BSPT male thread and BSP female thread, type A10, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting banjo intended for installation using soldering on metric tubes made of carbon steel. Fitting has hole D matched for diameter external tubes. Version with a hole banjo F matched for bolts with metric thread. Material fittings: carbon steel raw (without galvanizing). To select material lutowniczego and techniki soldering please contact Tubes International.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial A fitting integrated with a clamping ferrule o finish hygienic Intended for flexible hose THERMOCLEAN®. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type CNW for welding-in made of AISI 304 steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands, clamps or special sheet-metal ferrules of the CNFL type. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange straight INTERLOCK SUPERCAT, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with metric male thread, with 24° cone sealing, O-ring (CES), series heavy, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with a BSP male thread, 45° internal cone. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA weld-on spigot, type WRS, for an EN 1092-1 PN16 flange, for mounting with an RS shell clamp or for crimping with a TI-LR, TI-LDR ferrule. Material: steel AISI 304.
