Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp tubular type UNI-GRIP S Intended for connecting and repairs pipes with metal (connection axially fixed, with metal resilient rings driving in surface tubes and gasket rubber). Application: water, fluids based on water, sewage, light chemicals, air. version material: steel AISI 316Ti (housing, screws - Class A4-80, solid pins). sealing: EPDM rubber. Operating temperature: od -30°C up to +125°C. pressure nominal: PN 16 (Class pressure working for applications in industry shipbuilding, marine; Safety factor 4:1, assuming positive result single-use testing pressure four times greater, ale po which A clamp not can be used again). maximum Working pressure: up to 70 bar, depending on the diameter clamp (for remaining applications industrial and conditions static, factor safety 1.5:1, assuming positive result testing pressure 150% maximum pressure working, po which A clamp can be further repeatedly used). value pressures working apply for mounting clamps on round tubes steel o minimum wall thickness wall, mounting in accordance with instructions and tightening a wrench torque given on a clamp torque). Available version with incomplete pins, version "L" (example index: UN-GRIP-L-...).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover for an AKBO DN 11.8 quick coupling socket, protecting against accidental damage. color: blue. Material: polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover GPVC intended is for protection single hoses or bundles lines hydraulic and pneumatic. It protects the hose and secures the operator against oil spray in case of hose bursting. Material: PVC. Operating temperature: +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom short for welding for mounting clamp DIN 3015 standard complete type 100/101. For dimension group 0 there is one bolt hole. For dimension groups 1 ÷ 6 there are two bolt holes. Material: steel carbon or steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA displacement gear pump (hydraulic), TRALE, with external gearing, intended for use in the hydraulic systems of machines and equipment. Connections: threaded BSP. Direction of rotation: right. The stated maximum working pressure applies to continuous operation. Material: body and mounting plate – aluminum, rear cover – aluminum. Sealing: NBR. Medium: L-HM45 type hydraulic oil or equivalent. Fluid viscosity: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: from -20°C to +90°C (medium), from -20°C to +60°C (ambient).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTubes seamless for applications pressure made in accordance with the standard EN 10216-5 for pipes made of stainless steel. With an EN 10204 3.1 material certificate. Widely used in industry in the construction of installations and pipelines. Material: steel AISI 321 (1.4541), AISI 316Ti (1.4571). Standard pipe length (one section): 6 m. Shipped in sections: 1 m or 2 m, longer sections after agreeing on transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsActuator A compact series CMPC, with piston rod with a thread external, features small weight and short installation, co allows ich installing in hard reachable places. The special actuator profile is connected to the external covers by means of screws, which ensures its optimal axial rigidity and increases the variety of ways of its mounting. W equipped is in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows na easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal pressure working: 0.4 ÷ 0.6 bar, depending on diameter. maximum pressure working: up to 10 bar. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease lithium A universal for lubricator 75/PK, 400 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe EAR CLIP-W clamping ring is an improved version of the EARCLIP ring. It has an internal protective insert whose role is to protect the hose surface at the ring's clamping point and provide more even pressure around the circumference. Recommended for hoses of delicate construction. Rounded edges inside the ring protect the hose from damage. Material: AISI 304 steel (main ring), AISI 301 steel (insert).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee "Y" with a thread internal BSP intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "T" reducing of couplings push-in under hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee type TSM intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdhesive instant general use. adhesives wide range various substrates (metals, rubber, wood, cardboard, ceramics and most plastics). are suitable for use on surfaces o reaction acidic, such as surfaces chrome-plated or galvanised. gives high strength coupling, when element strictly adhere for each other. color: colorless. Working temperature range: od -40°C up to +120°C. Time to reach initial strength: 3-10 sek. Time to reach full strength: for 24h depending on material. certificate: P1 NSF Nr: 123000. Packaging - container 3 ml or 20 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA metal-rubber gasket for use in high-pressure installations (for quick couplings, adapters with a male thread). Working pressure: up to 1000 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn O-ring gasket type TWO for use in 4" tankwagen couplings - MB, MKV and MK. Material: hypalon (SCM). Temperature range (approximate): from -20°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose, for installations o lower pressures. It is characterised by high flexibility and lightness. meets standards: EN 854 2TE and EN45545-2. Inner layer: black, flame-retardant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose chemical o multilayer the structure with inner layer with fluoropolymer FEP o unique resistance and inert chemical. Characterized significantly greater flexibility than rigid hoses made completely with PTFE or other fluoropolymers. smooth Layer inner, resistant and inert chemical eliminates risk contaminants liquid. resistant na wide range substances chemical od substances corrosive for solvents na base MEK. hose meets requirements hygienic and for contact with food: American FDA 21 CFR 177.1550, nie contains phthalates ani BPA (bisphenol A), is non-toxic, nie leaves smell ani taste. sterilization oxide ethylene. used in various use industrial: flow chemicals, substances pharmaceutical, beverages food, production and packaging paints, solvents and adhesives, for inks and toners, for chemicals photographic, fertilizers and pesticides, in production semiconductors. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: FEP / PVC special. Maximum operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding of couplings for water for pumps fire-protection. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.., hoses of couplings (A complete lines) have certificate approvals CNBOP-PIB. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose delivery REDSIL, has versatile use in wide the scope temperatures. uses go both for hot air, as and e.g. in systems cooling. intended for liquids and gases, used in many branches industry between other chemical. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: od -50°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for conveying food, pharmaceutical and cosmetic substances: water, fruit juices, beer, wine, vinegar, alcohols with a concentration up to 96%, milk and dairy products, creams, soaps, aromatic substances, pigments and others. Resistant to fats and oils within the standard range of use. Good chemical resistance to light chemicals – acid and base solutions. The extruded, completely smooth inner and outer surface of the hose facilitates flow and cleaning. Reinforcement spiral with stainless wire steel, embedded in wall with TPE-S, makes go resistant to vacuum and kinking. transparent wall allows on easy visual control of the flow. The hose material is not vulcanised, is clean (contains no vulcanising additives), resistant to hydrolysis, does not promote bacterial growth, with low porosity and low permeability. Completely neutral in taste and odour, does not change the organoleptic properties of the medium. resistant to aging, conditions atmospheric and radiation UV. Cleaning by the SIP method, which noticeably shortens the service life, is not recommended. Use for high-proof alcohol (its vapours or other flammable substances) requires taking into account the hazards associated with static electricity. as hose reinforced only spiral (without braid) is characterized a certain elongation under pressure, therefore maximum pressure working hose is low (factor safety 1:5). Cleaning, disinfection or sterilisation of the hose must be carried out strictly according to the recommendations given in the catalogue sheet below. standards and requirements : 1) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C, D1, D2), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „e”. 2) Pharmaceutical industry: USP CLASS VI. Hose material: transparent TPE-S. Reinforcement: spiral of steel AISI 302. Working pressure: from 1 bar to 1.5 bar, depending on the diameter hose. Operating temperature: -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with a thread external NPT, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK A with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap with BSP female thread, type A8, intended for pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap (plug) ORFS with UNF female thread (sealing on the face surface), type VKA. Material: AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap tubes for the SPEEDFIT system, used in compressed-air installations. Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA bracket swivel intended for mounting on wall drums ECODORA series E-534. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe RFL L type U throttle check valve (push-in connection at the inlet and a threaded connection with an O-ring at the outlet, to the valve) regulates the airflow in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle adjustable type FPSB used in systems hydraulic as element control intensity flow. regulation flow realised is using a knob. permissible direction flow: A → A1, A1 → A. Material: steel carbon, galvanized (body), steel (knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve 1/2" of steel stainless for multifunction use for water, agents cleaning, foam. can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall na its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. the connection: BSP female. Material: steel AISI 304. pressure working: up to 60 bar. temperature use: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 5310, configuration T, intended for installations industrial. can be used for air, gases, water, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. connection: BSP female. Operating temperature: from -10°C to +110°C
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set of standard jaws for a FINN-POWER type P32 crimping press. Material: surface-hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA GUILLEMIN coupling with a male BSP thread intended for industrial and reloading installations for substances, bulk materials and granulates. Not suitable for transferring steam and gases. The coupling has a symmetrical design of the connection part. Made in accordance with the EN 14420-8/NF-E-29572 standard. Material: aluminum. Working pressure: 16 bar. Sealing: white NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with BSP female thread with swivel nut and hose fitting, type MSL, is intended for assembly onto rubber hoses and some plastic industrial hoses. Depending on the material used, they are suitable for all kinds of media: chemical substances, petrochemical products, liquefied gas. For very aggressive chemical substances, the couplings are coated with an E-CTFE fluoropolymer lining and a conductive CF-E-CTFE lining (R 6 Ω). Mounted using EN 14420-3 / DIN 2817 shell clamps (only clamps RS 636... and RS-637...). They can also be crimped with suitable ferrules. Working pressure: 25 bar. Coupling material: brass (MS), 316 stainless steel (SS), galvanized steel (ST). Sealing: flat gasket (supplied, standard polyurethane, PTFE for stainless steel). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adapter ADN with BSP, BSPT male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations. Depending on the size, material and manufacturer, the couplings have various shapes of wrench flats. Reducing adapters are also available. Material: AISI 304 or AISI 316 stainless steel. Sealing: flat (face) – BSP; on the thread (PTFE tape) – BSPT. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic sealant for threaded connections for 3" in installations metal. perfectly is suitable for applications ceiling and quick dispensing in low temperatures (e.g. in installations external). Not recommended for work with oxygen. Packaging capacity: 50 ml. Working temperature range: od -55°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA sensor proximity SQ type square for actuators is characterized certain and quick a bracket using screws eccentric, the possibility mounting using a screwdriver and wrench Allen 2.5 mm, edges thrust locating A sensor during mounting, increased resistance na factors atmospheric and moisture (IP 67, IP 68, IP 69K). Material housing sensor: polyamide (PA). Voltage supply: 5 ÷ 30V AC/DC (10 ÷ 30V AC/DC - HALL). Operating temperature: from -30°C to +80°C (from -5°C to +80°C - installations dynamic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle bent type Star-Tip, reducing level noise; installations directly for the body the gun. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). length nozzle: 90 mm. pressure working: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary head ST-458 with a ceramic insert, spray angle 20°. Marked with different colours to identify the calibration. Working pressure: 200 - 400 bar. Material: brass and plastic plastic, Adapter of steel stainless. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 232 screw-together quick-coupling socket with an NPT male thread and with a valve intended for hydraulic installations at very high pressures, with large mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. It can be connected / disconnected when residual pressure is present in the system. Carbon steel caps should be ordered separately. Material: carbon steel, galvanized. Sealing: NBR. Flow: 1/4" - 16.4 l/min, 3/8" - 21.3 l/min (Δp = 4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Operating temperature: from -25°C to +100°C.
