Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStem for tools EST-L intended for skiving outer layer rubber hoses hydraulic demanding larger length skiving. Material: hardened steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule IL13 for rubber hydraulic hoses with spiral reinforcement type R13 and R15. Use only with an INTERLOCK hydraulic fitting from the same supplier. Assembly - external and internal skiving. Diameter D1 - outer diameter. Diameter D2 - inner diameter. Diameter D3 - lock diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType L ferrule intended for crimping a hydraulic-type fitting (fittings as for high-pressure hoses, type Z) onto industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. The ferrule length L should not exceed the length of the fitting tail Lk. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible hose A universal o exceptional resistance na aging, conditions weather and ozone, o sound resistance chemical. resistant na temperature in wide the scope from -60°C to +135°C. extremely flexible, flexible, o high resistance fatigue na deformation, resistant na abrasion. excellent for use in pumps peristaltic. used for conveying and dosing in industry and services np. for dispensing soaps and agents disinfectant, agents cleaning, soda caustic, chemicals for etching and electroplating, in systems washing glass and glass panes itp. soft Material hose (61° Shore (A)) is very flexible and ensures excellent service life for 1000 hours use in pump peristaltic. hose is alternative for used often hoses with traditional mixtures rubber such jak EPDM, chloroprene. It has good chemical resistance to a range of chemical substances, especially acids and bases, oxidizing agents jak np. water oxidized, hypochlorite sodium czy ozone (300 pphm). resistant na range fats animal and vegetable. Not recommended for hydrocarbons. resistant na aging and radiation UV. is characterized low permeability for gases in comparison with hoses rubber. possible is connection hose through welding. version VACUUM o thick walls Intended is for continuous use with vacuum and is resistant na cracking and aging. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for cold and hot water for heavy conditions use, demanding high flexibility, resistance to abrasion, conditions atmospheric and ozone. used m.in. for cooling and temperature control moulds injection. It can be used for air. use for temperatures above +95°C reduces service life hose. Not is resistant to oil, not recommended also for air with mist oil. recommended assembly rings or ferrules clamping. Inner layer: black EPDM rubber. Reinforcement: a synthetic braid. Outer layer: black, blue or red EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +95°C (20 bar), od -30°C up to +140°C (10 bar), momentarily up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for industrial systems refrigerant (alternative for copper tubes) and air conditioning automotive (only for function filling and testing). W particular for freons (R22, R134a, R404a, R407c, R410a, R507) and oils compressor type POE and PAG. hose in sizes od 1/12" for 1/4" can be also used for conveying CO 2 (R-744) - use CO 2 as the medium refrigerant requires pressures about 10 times greater than in case conventional freons. Inner layer: polyamide (PA), for diameters od 1/12" for 1/4" blend PA with TPE (elastomer thermoplastic). Reinforcement: a polyester braid. Outer layer: micro-perforated, resistant to abrasion, polyurethane. Working pressure: from 45 bar to 120 bar, depending on the diameter hose. Operating temperature: od -45°C up to +130°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, formaldehydes, alcohols industrial and glycols. often used in plants industrial for discharge contaminants water and water process. appropriate also for water sea. Layer inner and outer antistatic R≤10 6 Ω/m. Available version delivery (without spiral steel) - hose ORLANDO. Vacuum: 0.9 bar. Inner layer: black rubber EPM (EPR). Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPM (EPR). pressure working: 10 bar. temperature use: from -40°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose intended primarily for washing rooms and equipment in industry food. It can be used for air, cold and hot water, oil, liquids hydraulic, light chemicals, liquids cleaning. strong, flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions atmospheric and abrasion, oil and fats, o elevated resistance to fats animal. Due to high strength and low extensibility especially recommended for hose reels drum. Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue blend rubber Chemivic® (NBR/PVC). Working pressure: 20.7 bar. Operating temperature: od -29°C up to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 300.000 pulse cycles. standards: EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable hose intended for discharge aggressive chemical vapours and for use in elevated temperature. good resistance to temperature, good resistance to vapours acids and solvents. resistant also on radiation UV, ozone, hydrolysis and corrosion biological. strength on bending. used for mechanical extraction vapours, air conditioning and ventilation in vehicles mechanical (buses, cars and trailers camping, boats recreational etc.), on inlets air for engines and compressors, in dryers granulates and plastics, in blow-moulding machines film etc. Other diameters are available on special order in the scope 15 ÷ 800 mm. version flame-retardant P2SP SE is compliant with requirements standards DIN 4102 B1 for materials construction. Hose material: fabric polyester impregnated black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHighly flexible and resilient hose polyurethane, having optimal properties mechanical and very high strength on compression in wide the scope temperatures. The calibrated outer diameter and wall thickness allow the use of easy-to-use push-in fittings from leading manufacturers. Resistant to abrasion, solvents, fuels, hydrocarbons. used in pneumatic and hydraulic systems, tool lines and industrial robots, etc.. Hardness per Shore (A): 90°. Available in colour natural, black, blue, green, red and yellow. Hose material: polyurethane PUR. Working pressure: from 9 bar to 14.3 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, resistant to abrasion, breaking and kinking spiral, reinforced hose intended specially for workshops automotive, for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 15 bar. Operating temperature: od -40°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine FEP (fluorinated ethylene propylene), material o properties close for PTFE. hose is characterized excellent chemical resistance, stability temperature dimensions and shape, smooth surface inner and external. good transparency hose allows na easy observation level or flow liquid. resistant na radiation UV. intended for low-pressure installations aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Ze regard na excellent properties insulating used in industry electronic and semiconductors. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. Material hose: FEP. hardness Shore (D) 55. temperature use: from -200°C to +206°C. pressure working: od 4.25 bar up to 13 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, resistant to kinking and action conditions atmospheric hose welding for acetylene made acc. to standards ISO 3821. Not recommended for gases generated based on fuels, oils and propane - butane (LPG). Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: smooth red rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose suction-delivery with completely made with resistant to abrasion polyurethane o high resistance to fats and oils. hose not contains phthalates and It can be used in industry food for conveying liquid and dry substances food. includes to: - in particular fats and oils food np. olive oil (simulant D2, up to +40°C and 30 min); - milk and its dairy products, drinks milk (simulant D1, up to +40°C and 30 min); - food hydrated, acidic, alcohol for 20 % and dry (simulants A, B, C, E; up to +70°C and 1 h). W use not involving direct contact with food (in industry, construction, agriculture) It can be used for water, light chemicals and other liquids based on fat and oils industrial (should take into account resistance chemical). used also for air, vacuum conveying dusts, powders, granulates and other abrasive substances bulk (should then take into account abrasion resistance and any problem electricity static). very smooth surface inner reduces losses conveying and ensures ease cleaning. transparent wall allows on visual control of the flow. Reinforcement dense spiral with wire steel ensures very good resistance to vacuum and kinking hose. made hose with polyurethane in comparison with similar hoses, PVC results considerably greater resistance on abrasion, greater strength (pressure working and vacuum) and greater range temperature at slightly smaller flexible. hose ARMORVIN TOTAL PU OIL TPHF complies with the European requirements 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C, D1, D2, E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 (d). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: transparent polyurethane. Reinforcement: galvanised steel spiral. Working pressure at a temperature of 20°C: from 3 bar to 7 bar - depending on the diameter hose. Operating temperature: from -40°C to +90°C, temperature medium, working pressure depends on temperature. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE V (VISIFLON) made is with high quality PTFE serrated spirally, ensuring exceptional among hoses PTFE flexible, flexibility and resistance na vibration. Jak each hose PTFE, Due to the unique properties of PTFE (large operating temperature range, resistance to most substances and chemical compounds, negligible adhesion surface), hose VISIFLON perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water itp. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses VISIFLON made with PTFE antistatic – version antistatic AS. antistatic teflon is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. selection hose in version standard with natural PTFE or in version antistatic should confirm in Tubes International. braid in version SS made is with annealed wire of steel stainless AISI 304 and ensures high strength pressure. at temperature use above +130°C maximum pressure working should reduced o 1% na each 1°C rise temperatures. available versions layer internal: standard (natural white) and antistatic (black). Material hose: spirally Serrated PTFE (teflon). Reinforcement: braid of steel AISI 304. pressure working: from 20 bar to 60 bar - depending on diameter hose. temperature use: from -70°C to +230°C. resistant na full vacuum for temperatures: +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery compliant with dimensions and requirements standards EN ISO 6134:2005 type 2 class A (Ω), of reinforcement steel, intended for conducting steam saturated and superheated. Layer inner o sound resistance na high temperature and steam saturated. can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na temperature, conditions atmospheric, abrasion and aging. antistatic R ≤10 6 Ω. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible and at the same time light hose suction-delivery intended for water, juices, drinks, alcohols with a concentration up to 20% and other products food. not advisable for greasy substances such as milk czy oils. resistant to vacuum and kinking thanks to embedded spiral with wire steel in wall hose. high advantage its is both transparent wall resistant to radiation UV, allowing on easy visual control of the flow media, as well as smooth jej internal parts reducing losses flow and ensuring ease cleaning. W ratio for hose ARMORVIN HNA is characterized greater pressure working and greater resistance on vacuum. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral steel (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in elevated temperatures. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: light green transparent PVC. Reinforcement: galvanised steel spiral. Working pressure: from 2 bar to 8 bar, depending on the diameter hose. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fixing bracket (angle bracket) intended for the systems: SKILLAR series 100, BIT, SYNTESI and NEW DEAL.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling reducing plug with fitting for hose, type F.11, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe PVS screw-together plug of a hydraulic quick coupling, intended for installations at very high pressures with large mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. It can be connected / disconnected when residual pressure is present in the system. Caps should be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1490 bar (plug disconnected), 3/8" - 1500 bar (plug disconnected). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling Hansen Beverage with valve and a thread internal UNF. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable with each other (different plug diameter), which allows avoiding mistakes in connection. Recognizing the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug has no notch. pressure working: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with fitting for hose, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: from 0°C to +71°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a thread external BSP with a hexagon pod wrench, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK F with a BSPT male thread or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. both versions meet all required parameters and come from od reputable suppliers. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe RFL L type B throttle check valve (push-in connection at the valve inlet and outlet) regulates the airflow in both directions. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFour-way ball valve "X" type MKHX with a thread internal BSP, intended for high-pressure installations hydraulic. standard Equipped with mounting holes. Material: steel (body, ball, stem). Seals: POM (ball), NBR (stem). Operating temperature: from -40°C to +100°C (POM); from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. Characterized compact design o relatively high flow. standard with stem type V (work valve close - open). each valve is factory tested. valve has special design, allowing on assembly panel without the need removal needle, thanks to this not loses warranty the manufacturer. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VM30 limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in holes assembly. Material body: steel galvanized (1/4"), aluminum (3/8" and 1/2"). Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 350 bar (1/4"), 260 bar (3/8" and 1/2"). Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve gate type 2000 with seal metal-metal and stem non-rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material gate: brass. Material a knob: steel carbon. sealing stem: EPDM. Connection: BSP female. Operating temperature: od -10°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread internal trapezoidal compliant with the DIN EN 12713 standard and with a thread external BSP or BSPT. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling reloading TW type MK with a thread internal BSP. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing coupling (type the gasket GSD, for 4" type TWO): NBR. sealing thread (type the gasket GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling straight for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting, type B3, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow swivel, screw with a thread external tapered BSPT, series F type R 31C NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight through-flow, type R3, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection push-in straight with a male BSP threadT, made entirely of steel AISI 316L, series 60000. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter IBC compliant of the standard DIN EN 12713 - thread internal trapezoidal na thread external. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSPT male thread / BSP female thread, type A4, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReel drum REELCRAFT series 30000 with drive manual for water, air and oil. is characterized high strength and resistance on vibration. The design twisted screws, no element welded. intended for applications industrial and terrain. A reel not is equipped in hose, which should order separately. Available version BA with gear. A reel tej series can also install on trolley. advantages: A reel o strong the structure for long hoses. Material: steel painted powder. Operating temperature: od -30°C up to +120°C.
