Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VMPP limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in Connection pressure-gauge (1/4" BSP female) and holes assembly. Material body: steel galvanized. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 400 bar. Operating temperature: od -20°C up to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve gate type 2010 with seal metal-metal and stem non-rising, intended for installation industrial. allows adjustment or throttling, at small speeds flow. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material gate: brass. Material a knob: steel carbon. sealing stem: EPDM (1/2" ÷ 1.1/2"), NBR (2" ÷ 6"). Connection: BSP female. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check pilot-operated (lock hydraulic) type FPD used in hydraulic systems as an element protecting against uncontrolled movement of a double-acting actuator (retraction / extension of the piston rod). Permissible flow directions: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). Material: steel galvanized (body), hardened steel (stem). Sealing: NBR. pressure opening: 3 bar, for size thread 3/4" - 0.5 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling reloading TW type VK with a thread internal BSP. Intended for mounting on hose ends or pipe installations having a male BSP thread. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). Intended for liquids, bulk materials and gases (except liquefied gas and steam). Material: steel AISI 316. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing thread (type the gasket GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on 90° angled coupling with BSPT male thread, type C5, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"T" tee fitting type AI 13200 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting push-in straight with a male BSP thread, series S, type PCM. economical solution for connecting flexible hoses pneumatic o metric and inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection push-in straight with a thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60000. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight through-flow for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling straight, series F type R 3 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for cleaning pipes metric, for use with devices ULTRACLEAN. sealing tubes with nozzle, occurs between surface front tubes, a restrictor is found inside nozzle. adapted for diameters external and wall thickness pipes metric. range sizes pipes: od 3 mm for 50 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of AISI 316 stainless steelL with fitting for hose. Available in two systems: 1/2″ and 3/4″. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket lever coupling ANFOR with a flange PN 10 for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling socket with a thread external BSP with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: SBR. Working pressure: up to 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check pilot-operated type FPDL used in hydraulic systems as an element protecting against uncontrolled movement of a double-acting actuator (retraction / extension of the piston rod). Permissible flow directions: V1 → C1 (and simultaneously C2 → V2), V2 → C2 (and simultaneously C1 → V1). valve equipped in 2 holes mounting shown na the photo. Material: body - steel galvanized (1/4", 3/8"), aluminum (1/2", 3/4"); stem - hardened steel. Sealing: NBR. pressure opening: 3 bar. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight NON SKIVE with metric female thread, with 24° cone sealing, O-ring (DKOS), series heavy, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with a fixed nut with a BSP female thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector CND karbowany intended for rubber hoses and industrial plastic hoses made of AISI 304 steel. Intended for assembly by means of bands or clamps. For repeated assembly and disassembly. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Straight connector type AI 13460 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-adhesive tape PYROTAPE intended is for wrapping ready lines and installations without ich disconnecting, in replacement cover PYROJACKET, a also for jej sealing na ends lines and objects o irregular shapes. resistant na splashes molten metal (nie adhere for cover), flame, moisture and abrasion. wall thickness nominal tape to 3.73 mm. at mounting recommended is overlap 30-50% and use tape PYROSIL or straps of stainless steel. tape nie should be used for lines dynamically bent. Material: fiber glass coated silicone in color rust. Operating temperature: from -54°C to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple for soldering type LN, spherical, 60° cone seal, similar to DIN 7608. Use a UM type nut (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with BSPT male thread, type A2, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 heavy clamp, type 201 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -30°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp according to EN 14420-3 (DIN 2817) intended for securing hoses on fittings with a safety flange. DN – hose inner diameter x hose wall thickness. Material: clamp – aluminum, screws and nuts – galvanized carbon steel. Working pressure: 25 bar (with an appropriately selected hose and EN 14420-3 fitting).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp with integrated, cast pressure "tongues". The clamp is intended for mounting fittings and couplings with a hose part ("tail") without a lock (safety flange), made of high-quality galvanized ductile cast iron (with yellow passivation free of hexavalent chromium). Material: galvanized ductile cast iron. With correct installation and an appropriately selected hose and fitting, working pressure up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 430 steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover spiral made with wire steel intended for securing hoses (cables) against abrasion, bending and crushing. standard length 5 m. Material: steel spring galvanized. gap between patterns: 5 mm (for wall thickness wire 1.6 mm), 6 mm (for wall thickness wire 2 mm), 10 mm (for wall thickness wire 3 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal A gun class "premium" for air, created for more demanding users. effectively cleans air surfaces with contamination. is characterized unrivaled force blowing and the possibility regulating rate. light construction, anti-slip handle and ergonomic shape the gun ensures large comfort use. resistant na impact and cracking housing qualifies device for use in difficult conditions. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). Material: polyoxymethylene (POM), elastomer thermoplastic (TPE), aluminum (Al). Sealing: NBR. pressure working: 16 bar. pressure bursting: 64 bar. Operating temperature: from -20°C to +60°C (16 bar) / up to +80°C (10 bar). level sound: 79 dB ÷ 103 dB.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWater gun for applications industrial BLUE KING made with brass (trigger, Bow and element valve of steel stainless, cover with rubber EPDM, seal with EPDM). thanks to slight sizes and ergonomic handle convenient lies in hand the operator. additional comfort ensures soft A guard made with rubber EPDM. easy and quick regulation nozzle, without needs use additional tools, allows on precision adjustment beam water for defined use. The design nozzle reduces wear water o 16% in ratio for standard guns for washing, not losing at this effectiveness cleaning. Gun equipped is in strong cover trigger, of steel AISI 304 in rubber cover, protecting against uncontrolled opening stream water and against damage. W lower parts handle installed is lock trigger Intended for continuous use. greater safety and high durability gun ensures double sealing stem. Connection: 1/2" BSP female. maximum Working pressure: 30 bar. Flow rate: 22.2 l/min (4 bar), 50 l/min (30 bar). Maximum Operating temperature: +95°C. weight: ok. 0.95 kg. dimensions: 190x145x50 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 223 made of aluminum with a flow rate of 60 ÷ 120 l/min, intended for diesel fuel. As standard it is equipped with a 1" BSP female swivel connection that prevents hose twisting. It does not have an automatic fuel shut-off system, so it is not compatible with dispensers at fuel stations. It is not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: aluminum. Color: silver. Flow rate: 60 ÷ 120 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun suction for removing dust and fine contaminants. W set end suction 250 mm, hose o length 500 mm and bag repeated use. Material: aluminum. Working pressure: 8 bar. pressure operating: 4 ÷ 8 bar. flow capacity: 500 Nl/min (at 6 bar). Operating temperature: -10°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum washer, type D11, recommended for sealing type A threaded connections and series D BANJO connections. The washer for the M5 thread is made of polyamide.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPress P16 HPZ with manual drive pump hydraulic (drive not is integrated with head), Intended for workshops repair, vehicles technical, points service etc. compact The design and small weight allows on performing repairs in space failure. has An electric (battery) indicator of reaching the crimping diameter. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). Dla range diameters crimp e.g. od 10 for 45 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, where largest diameter crimp obtained on jaws main, which range is 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPin STECKO as an element securing the plug-and-socket connection. Material: free-cutting steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° PUSH-IN for hose terminated a BSPT male thread or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with a thread internal and a thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o other size. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: steel AISI 316Ti.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter made of stainless steel, type 62040, with BSPT male thread and BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA MWSFE silencer with a male thread, used in compressed-air systems to reduce the noise level. reducer noise that can obtain through installing silencer, measured at pressure supply 5 bar, in distance 1m and pod angle 90° (in order to avoiding direct stream)od axis silencer, is average depending on size 30 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee, type C9, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
