Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for cleaning hoses, for use with devices ULTRACLEAN. nozzle can also use for cleaning pipes, pipes thick-walled and fittings. is to most popular type nozzles. Size: 1/4" ÷ 2".- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle extended straight o diameter hole 3 mm for guns for air, terminated a thread metric M12x1.25. diameter tubes: 5 mm. Available length: 115 mm, 165 mm, 265 mm and 415 mm. Material: brass nickel-plated. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose smooth with PTFE o excellent resistance chemical in various versions color. made with high quality PTFE with addition dye (Material compliant with FDA). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use for high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: PTFE (teflon), colored. hardness Shore (D): 60. pressure working: od 5.5 up to 20 bar. temperature use: from -200°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with a thread external. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling NiTO of AISI 316 stainless steelL with a thread internal BSP and a shut-off valve. Available in two systems: 1/2″ and 3/4″. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with a thread external NPT, with valve and without valve shut-off, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. The ergonomic shape and large release button provide convenient handling and ease of use. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. Length L - total length. Material: polypropylene. Sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: from 0°C to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow socket-and-plug STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized. sealing: NBR (O-ring), teflon (ring oporowy).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight BANJO fitting type RS, similar to DIN 7642, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting type CNW for welding-in made of carbon steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands, clamps or special sheet-metal ferrules of the CNFL type. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 45° NON SKIVE SAE 3000 (SFL 45), series light, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° INTERLOCK SUPERCAT, O-ring or other gasket in the flange groove, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Hose fitting, NiTO type A with a BSP female thread with a flat seal, knurled nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled body of the BANJO coupling with a cutting ring, type D17. Through-bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing socket made of stainless steel, type 62310, with BSP female thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple long with a thread external NPT, type 113H, for pipe connections intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp intended for securing hoses on standard (smooth) fittings with a safety flange. Material: clamp – brass, screws and nuts – galvanized carbon steel. Working pressure: 25 bar (with an appropriately selected hose and EN 14420-3 fitting).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm-drive lock, equipped with a spring to compensate for dimensional changes in the connection (hose shrinkage due to cold flow of the material or due to large temperature changes). The spring is a set of 8 disc (Belleville) springs – washers under the screw head. This maintains the clamp's grip and sealing around the entire circumference of the hose, preventing leakage from the installation. The clamp's spring mechanism automatically increases or decreases its diameter while maintaining the clamp's grip. Particularly recommended in the case of large temperature changes. Correct clamping is indicated by the screw end protruding beyond the lock housing and by the flattened disc springs. The clamp's inner insert protects the hose surface from damage. Installation tightening torque 5.6 Nm (max. 9.6 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 14.3 mm (9/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover spiral intended for securing hoses (cables) against abrasion and crushing. It also serves to hold a group of hoses (cables) in the molds of a bundle. resistant na conditions atmospheric, radiation UV, ozone, fire (in accordance with UL94VO), oil, oil drive, water. SPIRALINA FLEX in ratio for ordinary cover SPIRALINA has thinner wall and is more flexible. non-conductive - conductivity surface 10 10 Ω. Material: hard PVC (has memory shape). length standard: 20 m. Operating temperature: from -10°C to +60°C (momentarily up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal cover reflective made with fabric PYREFLECT BLANKET double stitched na required diameter. reflects above 90% energy heat radiation. used in cases, when radiating heat (radiation infrared) must be stopped and reflected. resistant na abrasion, water and oil. good resistance na flame. Na request Available in version VCO with hook-and-loop (velcro) in the scope diameters od 19 mm for 305 mm. The hook-and-loop mounting means that the cover can be easily installed without disconnecting lines, cables or pipes. Material: fabric aramid, foil aluminum. Operating temperature: up to +343°C (momentarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing double-cone (barrel) intended for mounting line for systems lubrication at use typical ends tube and seamless pipes of steel or brass. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-pressure ASTRA water gun for industrial applications. The outlet part is terminated with a female 1/4" BSP thread. The gun is also available with a swivel connection to the installation. Housing material: high-strength plastic. Working pressure: up to 350 bar. Flow rate: 45 l/min. Operating temperature: up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight in use Gun powered compressed air made with strength and resistant to corrosion acetal intended for suction e.g. oil engine, oil hydraulic, liquid refrigerant etc. standard equipped in transparent tank o capacity 1.2 l and 2.0 l. facilitating monitoring course extracted oil or other liquids and in tube suction o length 1.5 meter terminated rigid tube o diameter outer Ø 10 mm (length tubes 26 cm). possible continuous work thanks to lock lever. W case oil engine recommended suction at warm engine – min. temp. oil 50°C. important! Not should use for liquids explosive e.g. gasoline. Material: Gun, A handle, Cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; hose suction – PVC; tube – polyamide (PA11). pressure operating: 6 ÷ 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEconomical, light Water gun NiTO LIGHT DUTY with rear trigger. made with brass, A guard with blue polyurethane. has adjustable nozzle outlet and smooth adjustment flow. maximum Working pressure: 8 bar. Maximum Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 223X made of polyamide with a flow rate of 60 l/min, intended for AdBlue® and water. As standard it is equipped with a serrated tail for a 1" hose. It does not have an automatic medium shut-off system. It is not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: glass-fiber reinforced polyamide. Color: blue. Flow rate: 60 l/min. Swivel connection: no.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn MB cover, without a chain, for TW transfer couplings. Used for the VK (male) part, it constitutes a pressure-resistant cap. Material: steel AISI 316. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). gasket type TWF, Material the gasket: hypalon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P20 AP o pneumatic drive pump hydraulic Intended for workshops repair, points service, etc. occurs in two versions: with mechanical an index reaching diameter crimp (control set diameter crimp takes place at means two pins control) and electrical (battery) MS with indicator light LED informing o reaching diameter crimp, set knob micrometric. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, complete line high-pressure, based on hose VIPER, intended for tools hydraulic 700 bar, such as spreaders, shears, balancers for doors, keys czy lifts, in color yellow phosphorescent, well visible in weak conditions lighting. equipped is in limiters deflection hose za ferrules. line is tested pressure and supplied of appropriate certificate. Inner layer: polyamide. Reinforcement: high-strength, multilayer a steel braid. Outer layer: yellow phosphorescent polyurethane. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 700 bar. Operating temperature: od -30°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with a thread internal and a thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o other size. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge dust, sawdust, chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. dense spiral reinforcing ensures greater resistance to vacuum in ratio for hoses ECO 0.4 and ECO 0.6. pliable, less compressible, smooth inside and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.7 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rail intended for mounting clamp DIN 3015 heavy type 201 using a nut ADESP. Shipped in 2 m lengths. Material: steel carbon or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together tee "T", type B9, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality coupling Tee "T", made entirely of steel AISI 316L, series 60230. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStem for tools EST-S intended for skiving outer layer rubber hoses hydraulic machinable. Material: steel hardened.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType LDR, LD, LR ferrules are intended for crimping hygienic stainless steel fittings (with a serrated tail) type NH-xxK-xxx and fittings with a hose tail for an RS shell clamp, e.g., TW-KRS-xxx, NH-xxR-xxx, onto industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral – suction and delivery hoses). The ferrule should be selected taking into account the inner diameter Dw and outer diameter Dz of the hose. The ferrule length L may be slightly (a few mm) greater than the length of the fitting tail Lk. LR ferrules – only for fittings for a shell clamp, LD – only for fittings with a serrated tail, LDR – ferrules for both fitting types. Diameter D1 – outer diameter. Diameter D2 – inner diameter. Diameter D3 – lock diameter. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal hose industrial intended for washing hot water floors and equipment in industry meat, food, dairy, etc. Layer inner Meets FDA requirements 21 CFR 177.2600 and BfR XXI kat.3. Layer outer compliant with ISO 22196:2011 (Ref.1), antibacterial, resistant to fats animal and vegetable. Layer outer resistant to conditions atmospheric, ozone and abrasion. hose intended also on reels drum. Inner layer: white smooth synthetic rubber. Reinforcement: a synthetic braid. Outer layer: blue rubber PVC/NBR. Working pressure: 10 bar. Operating temperature: od -20°C up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream - beige flexible hose free of smell and taste, non-toxic. resistant na temperature in the scope od - 60°C up to +135°C. extremely flexible, flexible, o high resistance fatigue na deformation, resistant na abrasion. excellent for use in pumps peristaltic. used for dispensing and portioning cold and hot products food, for soaps, detergents and agents disinfecting, for paints and toners, pesticides and fertilizers and in laboratories. soft Material hose (61° Shore-A) is very flexible and ensures excellent service life for 1000 hours use in pump peristaltic. hose is alternative for used often hoses, PVC or silicone. It has good chemical resistance to a range of chemical substances, especially acids and bases, oxidizing agents jak np. water oxidized, hypochlorite sodium czy ozone. resistant na range fats animal and vegetable. Not recommended for hydrocarbons. resistant na aging and radiation UV. meets requirements FDA 21 CFR 177.2600 for contact with food. possible multiple sterilization steam in autoclaves, cleaning CIP and SIP in installations, oxide ethylene or method radiation. length full roll hose: 15 m. Material: TPE (Norprene® – thermoplastic elastomer). Maximum operating temperature: up to +135°C. temperature brittleness: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket oversized, type F.4, intended for socket coupling FERRARI. Material: rubber SBR/NR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery „FULL OHM” completely antistatic (Ω/T), intended for conveying substances highly flammable and very aggressive chemical. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), antistatic (R 6 Ω), mirror smooth, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic and spiral with wire steel. outer Layer type MARBLE (marbled), smooth, coated polyethylene (UPE), antistatic (R 6 Ω), meeting requirements FDA, free of smell and taste, resistant na abrasion, ozone and aging, chemicals and short-term operation aggressive acids. advantage layer MARBLE is also low factor friction - hose slides and nie soils surface with which is in contact, is easy for cleaning. excellent resistance chemical PFA and properties antistatic both layer internal jak and outer (R 6 Ω) and in across wall hose (R 9 Ω) make, that hose is costly, ale technically ideal solution for applications demanding highest safety, we all zones hazard explosion (ATEX). used in industry chemical, petrochemical, pharmaceutical and cosmetic, a also in biotechnology. Nie is intended for sterilization in autoclave. Na special order Available version with additional built-in cables copper (M/T). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP Class VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, nie cytotoxic (ISO 10993 Part 5); Outer layer: FDA 21 CFR 177.1520. Nie contains plasticizers, phthalates ani substances origin animal. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: black polymer PFA. Reinforcement: synthetic cord, steel spiral. Outer layer: white-black polyethylene UPE, rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. temperature use: from -35°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. non-conductive – resistance electrical blend rubber ≥108 Ω/m. Inner layer: white insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -40°C up to +120°C (outer up to +530°C).
