Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNON-SKIVE clamp sleeve for rubber hydraulic hoses with spiral reinforcement type 4SP, 4SH, R13, and R15. Use only with the appropriate NON-SKIVE hydraulic fitting from the same supplier. Material: carbon steel, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose made of platinum-cured silicone rubber. Used in the pharmaceutical, cosmetic, and biotechnology industries, medical devices, cell culture, sterile filling lines, water for injection (WFI), chemistry and blood analyzers, and liquid chromatography. Can be used in peristaltic pumps – moderate lifespan. Characterized by an exceptionally smooth inner surface that prevents the deposition and adhesion of contaminants inside the hose and the growth of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth inner layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenic ensure total fluid purity in sensitive applications. Meets hygiene requirements of US FDA 21 CFR 177.2600, NSF-51, 3-A, and USP Class VI as well as ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Sterilization possible by steam (30 min, 1 bar, 121°C), ethylene oxide, or radiation (up to 2.5 Mrad). Full roll length of the hose is 15 m. Hose available in inch and metric sizes. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: silicone (platinum). Maximum operating temperature: +204°C. Brittleness temperature: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for finishing treatment of pipe ends after cutting (removal of burrs from the outer and inner edges). Designed for pipes made of both carbon steel and stainless steel. Maximum pipe diameter: 42 mm. Voltage: 230 V. Power: 0.18 kW. Speed: 50 rpm. Weight: 30 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality thin-walled BARRIER hose for refrigerant flow in a single polyester braid for use in automotive and industrial air conditioning and refrigeration systems operating on R134a, R1234yf, R404a Suva MP52, and R22 mineral and synthetic oils PAG, POE, and PVE. The outer layer is resistant to abrasion and weather conditions. Standards: SAE J2064 type C class I. Inner layer: black CR rubber separated by a nylon (PA) layer. Reinforcement: polyester braid. Outer layer: black CIIR rubber, micro-perforated. Working pressure: 35 bar. Operating temperature: from -35°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong suction and discharge hose with an inner layer made of chemically resistant polyethylene with ultra-high molecular weight (UPE, UHMWPE), black and white MARBLE type, smooth, antistatic (R<106 Ω). The inner layer is resistant to most acids and bases as well as many other aggressive chemicals (at elevated but not very high temperatures), making the hose widely used in the chemical and petrochemical industries. The MARBLE type UPE inner layer also complies with food hose requirements, features a low friction coefficient during flow, and prevents medium deposition on the walls. This significantly facilitates cleaning and allows for use in the cosmetic, pharmaceutical, and food industries as well. Reinforced with synthetic cord and steel spiral. The outer layer is made of chemically resistant EPDM rubber, antistatic (R < 106 Ω), abrasion-resistant, ozone-resistant, and weather-resistant. Compliant with EN 12115:11 requirements (type Ω/T, fully antistatic (R < 109 Ω) - ensures the dissipation of electrostatic charges through the hose walls, allowing use in all explosion hazard zones. Standards and requirements: Chemical hoses: EN 12115:2011 (type Ω/T). Food industry, contact with food (inner layer): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. Explosive atmospheres: ATEX directive (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Installation: use smooth fittings with a spigot ("tail" to the hose) without sharp or high ribs that could cut or damage the UPE inner layer when tightened. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Installation with clamp sleeves or band clamps. Inner layer: white-black UPE polyethylene. Confirmation of resistance and application conditions requires contact with Tubes International, especially for temperatures above 50°C. Inner layer: white-black UPE polyethylene. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar - depending on the hose diameter. Operating temperature: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal, strong, and highly flexible rubber suction hose, designed for air, water, and light chemicals. It can be used for dispersive water-based epoxy and polyurethane paints. Not suitable for oils, fuels, aromatic hydrocarbons, cellulose paints, chloroprene, and others containing aromatic solvents (e.g., toluene, xylene) or gasoline. For chemical applications, we recommend contacting Tubes International. Inner and outer layers are antistatic (R<109 Ω/m), outer layer resistant to ozone, aging, and weather conditions. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (temporarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for automotive brake systems. Manufactured according to DIN 74310 standard, it features high abrasion resistance. The outer layer is resistant to ozone, aging, and weather conditions. Inner layer: black EPDM rubber. Reinforcement: high-strength synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with increased lifespan compared to the standard. Confirmed hose lifespan of 400,000 impulse cycles. Standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily +120°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in pneumatic systems, hydraulic systems, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Maintains flexibility at low temperatures. Shore hardness (A): 95°. Available in natural and blue colors. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, tear-resistant, and kink-resistant spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with straight sections of 100 mm and 500 mm and ends with external BSPT threads. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on hose diameter). Operating temperature: from -40°C to +75°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE FX hose is an optimal solution for industrial applications where high flow rates, chemical and temperature resistance, and permeation resistance are required. It is perfectly suited for the transfer of chemicals, fuels, oils, paints, solvents, adhesives, dyes, gases, and steam, detergents, water, and food substances. At operating temperatures above +160°C, the maximum working pressure specified in the table should be reduced by 1% for each 1°C above this temperature. For example, at a temperature of 180°C, the maximum working pressure for the AF-FXSS-10 hose is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. In cases where a substance that is a poor conductor and has potential electrification properties flows through the PTFE hose, the electric charge will accumulate on the inner surface of the PTFE, and to avoid static electricity issues, an antistatic AS variant of PTFE is used. Antistatic Teflon in the AS version contains graphite evenly distributed in the PTFE and has a resistance R <10^8 Ω (according to ISO 8031 annex A). Hose material: smooth inside, corrugated outside PTFE (Teflon) - natural white and antistatic - black. Reinforcement: AISI 304 steel braid. Working pressure: from 50 bar to 110 bar - depending on the hose diameter. Operating temperature: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, semi-transparent smooth-walled PTFE hose with excellent chemical resistance. Designed for low-pressure installations, chemicals, paints, adhesives, liquid and gaseous fuels, oils, lubricants, air, gases, water, steam, and water-based fluids. Used in all types of industry. The hose is not antistatic (does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic plug connections. Can also be used as mechanical guidance for hoses or rods due to the low friction coefficient and self-lubricating properties of Teflon. Flame retardant (UL94 V-0) and with a high oxygen index (LOI). Safety factor n = 4:1. The burst and working pressure of the hose decreases at operating temperatures above 20°C and is dependent on its height. Hose material: smooth PTFE (Teflon). Shore hardness (D): 58. Operating temperature: from -200°C to +260°C. Working pressure: from 2.3 bar to 10.8 bar - depending on the hose diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure delivery hose, reinforced with steel, designed for conveying superheated steam. The outer layer is resistant to high temperatures and weather conditions. Not intended for steam cleaners ("dry steam cleaners"). For water vapor, use special screw-on fittings designed for water vapor. To extend the lifespan, the hose should be emptied of steam after use to avoid condensate buildup. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord of steel wire. Outer layer: black or red micro-perforated EPDM rubber. Working pressure: 18 bar. Operating temperature: from -40°C to +210°C (temporarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for high-pressure cleaning devices with cold and hot water. Resistant to abrasion, ozone, and detergents. Not suitable for steam cleaning. Standards: EN 1829-2:2008, EN 853 1SN or EN 853 2SN - dimensional compliance. Inner layer: black synthetic rubber. Reinforcement: single steel braid or double steel braid. Outer layer: black or blue synthetic rubber. Working pressure: from 210 bar to 400 bar, depending on the diameter and type of hose. Operating temperature: from -40°C to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA is a suction and discharge hose designed for the transfer of juices, beverages, milk, water, wine, beer, alcohols with a concentration of up to 50%, and other food products. Not recommended for fatty substances such as oils. Besides food applications, it can be used in industries such as construction and agriculture for light chemicals, dirty water, sludges, sewage, and other fluids that do not contain fats, oils, and hydrocarbons. It is also suitable for air, and the steel spiral embedded in the hose wall allows it to be used for vacuum transfer of powders, granules, and other mildly abrasive bulk materials. When dealing with such substances, wear resistance and potential static electricity issues should be considered. The smooth inner surface reduces flow losses and ensures ease of cleaning. Standards and requirements: Food industry, food contact: compliant with European regulations 1935/2004/EC and 10/2011/EU (simulative fluids A, B, C, and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: galvanized steel spiral. Working pressure: from 2 bar to 7 bar - depending on the hose diameter. Vacuum at 20°C: from 0.7 bar to 0.85 bar - depending on the hose diameter. Operating temperature: from -5°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug ANFOR with "tail" for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong screw clamp with a hinged closure for heavy loads features a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made from high-quality steel band with a width ranging from 18 mm to 26 mm. The rolled edges of the band prevent damage to the surface of the hose on which the clamp operates. The clamp has markings on the band indicating the minimum and maximum diameter as well as the material from which it is made. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be utilized. Material: all components made of AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOPFLEX® is a safety system that protects equipment from damage and employees from injury in the event of a hose being pulled from the fitting. A hose pulled from the fitting will be held in place by a hose. The clamp, equipped with a rubber seal, ensures stable fastening regardless of changing working pressure. The safety device is intended for hydraulic hoses and is selected for specific types of fittings (metric, inch, flange, etc.). Additionally, the appropriate STOPFLEX® clamp (index OP-SFO-...) must be purchased for the given hose diameter. The system has been tested on hoses operating under the maximum working pressure specified according to the following standards: EN 853, EN 854, EN 855, EN 856, SAE J517. Proper operation is guaranteed provided that the working pressure specified in the standards is not exceeded.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type U throttling check valve (plug-in connection at the inlet and outlet of the valve) regulates the flow of air in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality two-way ball valve type BKH with BSP internal thread, designed for high-pressure hydraulic and industrial installations. To properly select the valve for media other than hydraulic oil and for high operating temperatures, consultation with Tubes International is required. Working pressure depends on the sealing material of the valve. Material: steel (body, ball, stem). Seals: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: from -40°C to +100°C (PA); from -40°C to +150°C (PVDF); from -200°C to +250°C (PTFE); from -20°C to +100°C (NBR); from -20°C to +200°C (FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure needle valve designed for installation in a system or panel mounting. Mainly used in harsh conditions for sampling, flow shut-off, and testing stations. Standard with a V-type stem (valve operation close - open). Each valve is factory tested. Connection material: AISI 316 steel. Stem material: AISI 316 steel. Valve sealing: metal/metal (AISI 316 steel). Packing seal: PTFE or GRAFOIL. Operating temperature: up to +204°C (PTFE), up to +648°C (GRAFOIL). Working pressure: up to 690 bar. Connection: NPT female.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVMP relief valve limiting the maximum oil pressure in hydraulic systems. It allows free flow of fluid between the P connections. When the pressure exceeds the set value, the T path opens and excess oil drains to the tank. The opening pressure value is set using a screw (adjustment with an Allen key, locked with a locking nut). The valve is equipped with a pressure gauge connection (GW 1/4" BSP) and mounting holes. Body material: galvanized steel. Valve material: galvanized steel. Sealing: NBR. Maximum working pressure: 300 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gate valve type 2029 with metal-metal sealing and non-rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: AISI 316 steel. Disc material: AISI 316 steel. Handwheel material: aluminum. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FPR type check valve is designed to close the flow of hydraulic fluid in one direction and allow free flow of fluid in the opposite direction. Standard opening pressure: 0.5 bar (also available in 3, 6, and 10 bar). Permissible flow direction A → A1. Material: galvanized steel (body), hardened steel (stem). Sealing: metal-metal. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread (rotating or fixed nut) compliant with DIN EN 12713 standard and hose end. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling plug for transfer coupling type VK with internal BSP thread. Designed for installation on hose ends or piping systems with external BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (excluding liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type B1 external thread connection with a cutting ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type C1 external threaded socket coupling designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality 90° angled connection with external BSPT thread, made entirely of AISI 316L steel, series 60110. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic, and medical industries. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external cylindrical thread, series F type R 31 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, coated with nickel in a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angled plug connector with external thread, type R31, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic dispensing gun type 227X made of stainless steel with a flow rate of 40 l/min, intended for AdBlue and water. Standardly equipped with a swivel connection GW 1" BSP, which prevents hose twisting. Features an automatic medium shut-off system. Designed for compatibility with all dispensers at fuel stations. Not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: stainless steel coated with rubber. Color: blue. Flow rate: 40 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever valve allowing for quick opening and closing of flow. The design of the valve with a double-jointed disc ensures good sealing. Used in agriculture, equipment for sewage tankers, and in industry. Complies with the requirements of the PED Directive 2014/68/EU. Maximum constant working pressure across the full range of operating temperatures. Body material: brass. Valve material: brass. Lever material: carbon steel. Stem sealing: fiber. Body sealing: NBR. Connection: BSP thread. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and elastic, easy to operate suction and discharge hose designed for the transfer of fatty and non-fatty food substances, requiring the use of odorless and tasteless rubber. It contains no plasticizers, phthalates, or animal-derived substances. The inner layer made of NBR is resistant to standard cleaning agents and processes used in the food industry. The outer layer is resistant to temporary contact with animal and vegetable fats. Particularly recommended for applications requiring a small bending radius with good pressure and vacuum resistance. Widely used in the dairy industry and for the transfer of milk under normal operating conditions. Not recommended for transfer applications in heavy working conditions and under pulsating pressure. Standards and requirements: 1) General: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) Food industry, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Inner layer compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, RAL (German Institute for Quality Assurance and Certification). Inner layer: white NBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew socket PVS of hydraulic quick couplings designed for installations with very high pressures, where there are significant mechanical loads. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Can be connected/disconnected when there is residual pressure in the system. End caps must be ordered separately. Material: carbon steel. Sealing: NBR. Flow: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. Burst pressure: 1/4" - 2100 bar (connected coupling), 3/8" - 1850 bar (connected coupling), 1/4" - 1800 bar (disconnected socket), 3/8" - 1850 bar (disconnected socket). Operating temperature: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket NiTO made of AISI 316L stainless steel with internal BSP thread. Used in conditions with increased hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., socket 1/2″ with plug 3/4″. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP thread for free flow, intended for cold and hot water. The double-sided seal of the socket without a valve seals both the plug and the threaded connection to the installation, ensuring high durability. Material: brass (balls, spring - stainless steel). Working pressure: 16 bar. Sealing: EPDM (approved for KTW, DVGW W270 for drinking water). Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with external NPT thread. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector socket ANFOR with "tail" for hose for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
