Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBP7 clamping sleeve for thermoplastic hoses type R7 (SAE100R7). Installation - no machining required. Material: AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMC-BP7 clamping sleeve for thermoplastic hoses type R7 (SAE100R7). Assembly - no machining. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBX8 clamping sleeve for thermoplastic hoses type R8 (SAE100R8). Installation - no machining. Diameter D1 [mm] - outer diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMetal-rubber gasket for use in high-pressure installations (for quick couplings, adapters with external threads). High-strength version. Working pressure: up to 1500 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with an extended temperature working range compared to standard hydraulic hoses. Standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 78 bar to 400 bar depending on the hose diameter. Operating temperature: from -50°C to +135°C (temporarily +150°C). For water and air, the maximum operating temperature is +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Standards: EN 856 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 280 bar to 450 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose designed for the most demanding applications. Excellent resistance to pulsating pressures. Thanks to a special rubber compound, the outer layer is antistatic, highly flame-resistant, highly resistant to ozone, weather conditions, abrasion, and UV radiation. Standards: EN 856 4SH, ISO 3862-4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose. Enhanced hose lifespan compared to the standard confirmed by a test of 1,000,000 impulse cycles. Outer layer is flame-resistant (MSHA). Standards: EN 856 R13, ISO 3862-1 R13, SAE 100R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 350 bar. Operating temperature: from -40°C to +120°C (temporarily +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with increased outer diameter for applications in mining. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 853-2ST. Installation: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for mining applications. Antistatic, non-toxic, flame-resistant outer layer. It has a certificate confirming compliance with safety requirements in explosion hazard zones. Standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 350 bar to 420 bar depending on the hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 2SC, SAE 100R16, SAE 100R2AT. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 165 bar to 400 bar depending on hose diameter. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGeneral-purpose hydraulic hose with reduced outer diameter and weight, and increased flexibility. Complies with standards: EN 857 1SC, SAE 100R1 AT. Inner layer: black synthetic rubber. Reinforcement: single steel braid. Outer layer: black synthetic rubber. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose in a double version (two hoses with a welded outer layer) designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAntistatic hose (R < 3x104 Ω/m) designed for the transmission of non-conductive media. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for the transfer of aggressive chemical substances such as paints and solvents. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose designed for high-pressure hydraulic systems. Inner layer: polyester. Reinforcement: aramid braid + steel braid (UH-OL8M-06 - hose reinforcement consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose consisting of two strands of STANDARD type hose. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: from -40°C to +100°C (for water and water-based fluids max. up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, antistatic (R<1.2x105 Ω/m) hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braiding. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Resistant to seawater. Micro-perforated on request (for gases and air). Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for natural gas (CNG - Compressed Natural Gas). Used for filling tanks of vehicles powered by CNG. Available in a double version with a venting hose. Standards: ISO 15500-17. Inner layer: black conductive polyamide. Reinforcement: one or two aramid braids + synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, and water-based fluids. Also available in a micro-perforated version (for gases and air). Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Exceeds SAE 100R8, ISO 3949-R8 requirements. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to seawater. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Resistant to very low temperatures and seawater. Suitable for operation in high humidity and saline air environments. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on hose diameter. Operating temperature: from -54°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible hose intended for solvents, paints, isocyanates, polyols, gases, air, water-based fluids. Standards: SAE 100R18, ISO 3949-R18. Installation: use fittings type Z. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: polyurethane. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert of DIN 3015 type 201 clamp made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part insert for clamp DIN 3015 type 301 made in accordance with DIN 3015 standard. It typically features a profiled (grooved) surface for the pipe opening. Insert material: rubber. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforcing insert for thin-walled pipes DIN 2353. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 117 quick coupling plug with internal thread and valve designed for hydraulic installations at very high pressures. It is a sister version of the 115 series, having the same operating parameters; however, their mutual connection is not possible. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Supplied standard with a plastic cap for protection against contamination. Material: hardened, galvanized steel. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Working pressure: 1000 bar (connected coupling). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN type V quick coupling plug with mushroom valve and internal BSP thread. The 1/2" quick coupling is compatible with the ISO-A standard quick coupling index HQ-IA12-M-08G. Mainly used in agricultural machinery. Material: galvanized steel. Operating temperature: from -25°C to +100°C. Sealing: NBR. Working pressure: up to 375 bar (depending on the size of the quick coupling). Flow is specified for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic quick coupling with shut-off valve and external metric thread (DIN 2353). Application: power hydraulics (hydraulic oil). Quick coupling mainly used in agricultural machinery. Commonly referred to as "euro couplings." Interchangeable with ISO-A quick couplings from other manufacturers. Material: galvanized steel. Seal of the coupling: NBR. Operating temperature: from -20°C to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate is given for a pressure drop of 3 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHANSEN quick coupling plug type HK with internal BSP or NPT thread. Compliant with ISO 7241-1 B standard. Interchangeable with ISO-B quick couplings from other manufacturers. Application: hydraulic power (hydraulic oil), industrial (water, steam, fuels and oils, gases, chemicals). Material: brass. Sealing: NBR (operating temperature from -40°C to +121°C), EPDM (operating temperature from -54°C to +149°C), EPDM236 (for use with steam at temperatures above +149°C). Working pressure: up to 207 bar (depending on the size of the quick coupling). Flow has been provided for a pressure drop of 3 bar.
