Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHAMMER LUG connector type 602 for general use (for air, gas, oil transmission). It features a replaceable edge seal (NBR) that reduces vibration of the flowing medium and provides protection for the seal (metal/metal) against corrosion. Set includes: male part, female part + nut. Color: orange (male, female parts), black (nut). Material: chromium-molybdenum steel 4130. Connection: for welding (wall XXH). Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 6000 PSI (414 bar).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with external thread compliant with DIN EN 12713 standard and BSP external thread. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary joint type 1000 designed for connections of rigid or flexible hoses, wherever there is rotational movement or oscillations between individual parts of the installation. Material: nickel-plated steel. Sealing: PTFE. Operating temperature: up to +200°C. Connection: BSP female, BSP male. Rotations: slow, oscillating. Working pressure: from 20 bar to 50 bar (depending on the size of the joint).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect socket with hose end designed for washing installations, deionized water filtration, industrial machines, leak detection, etc. The distinctive design (does not include balls and securing sleeves) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 3/4" with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight double BANJO fitting type DRS, intended for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel installations, air systems, etc. Material: carbon steel, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWeldable nipple with external BSPT thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhite identification ring (gas) for Hansen Beverage quick coupling socket. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMB cover, without chain, for TW loading connectors. Used for VK (male) parts, serves as a pressure-resistant plug. Material: brass. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Seal type TWF, seal material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO fitting with external BSP thread type AI 13550 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Seal: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Flat sealing between internal components. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with a hose end. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK FW connector plug for welding (butt welding) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with PN 10 flange, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDDC dry disconnect coupling plug with internal BSP thread made of aluminum, widely used in road, rail, marine, aviation transport, as well as in the petrochemical, chemical, and pharmaceutical industries. Installed on the tank side. The plug design is based on a piston valve (opens during connection and closes when disconnecting the coupling, eliminating liquid leakage). Meets all safety, environmental protection, and reliability requirements for the transfer of hazardous, toxic, or expensive liquids. Manufactured according to NATO standard STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). The couplings comply with ATEX, TDT, ADR, RID, IMDG, pressure directive 97/23/EC. It also has the recommendation of the European Chemical Industry Council CEFIC. Sealing: o-ring (viton), flat gasket (PTFE). Working pressure: 10 bar. Operating temperature: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, strong clamp with a hinged closure for heavy loads with turned-up edges of the band, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design ensures uniform pressure around the entire circumference, providing optimal sealing. The movable bridge allows for multiple installations without the need to remove the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three-point welds on the band, a high-strength screw with a spacer along with securing half-rollers guarantee maximum and reliable pressure. The clamp features markings on the band for minimum and maximum diameter as well as the material from which it is made. The W4 version of the clamp is made entirely of stainless steel and is intended for demanding applications where high corrosion resistance is essential - for marine applications and in the food industry. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be used. Important! Exceeding the tightening torque value will cause the screw housing to bend; the use of pneumatic tools for installation is not recommended. The band and bridge are made of AISI 430 steel, while the screw and rollers are made of galvanized steel. The maximum working pressure of up to 45 bar depends on the type of hose and the diameter of the clamp.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve designed for the unloading of IBC pallet containers, allowing for unloading without the need to disassemble the cover. For installation on the upper covers of the inlet with a 2" threaded opening. Material: polypropylene. Spring: stainless steel. Seal: polyethylene (LDPE). Opening pressure: 0.069 bar (1 psi).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe most popular type due to the high mechanical resistance of the material. Widely used for standard applications (air, water, oil, gas) but also for "choke and kill" connections, fracturing, and cementing. Set: male part, female part + nut. Color: red (male, female parts), blue (nut). Material: chrome-molybdenum steel 4130. Connection: GW NPT. Sealing: metal/metal (cone) + additional edge seal (NBR). Pressure: 15000 PSI (1034 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSJ swivel joint with a single bearing, designed for connections of rigid or flexible pipes, where it is required that no torsional moment is transferred to other elements of the installation. It is used in the chemical and petrochemical industry. The joint is not resistant to high bending moments; in such cases, it is recommended to use a swivel joint with a double bearing - heavy duty (available on request). The joint meets the requirements of the Pressure Equipment Directive 97/23/EC (PED), TDT, TÜV, Apragaz. Various combinations of the following connections are also available on request: BSP thread, NPT, BSPT, ACME, for welding, PN flanges, ASA, TW, TTMA, grooved joints. Material: AISI 316 steel. Operating temperature: from -40°C to +250°C. Rotations: slow, oscillating. Working pressure: up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal head plug with external BSPT thread (above 3/8" the plug has an octagonal head). Material: AISI 316 steel. Working pressure 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSF type end fitting with flat sealing, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Use nut type UM (EC-105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick filling/emptying cover for IBC pallet container with two vents. The cover is supplied with a gasket. Filling hole thread size: 2″ BSP. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with external BSP thread and flat gasket type AI 13485 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass. Gasket: NBR. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with 2 x internal BSP thread for use in pipe connections of industrial installations. Flat sealing between internal components. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: viton. Operating temperature: from -40°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with hose end, without flange, facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with a weldable connection, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate disconnect connector plug with internal thread made of AISI 316 stainless steel. Used in the chemical and pharmaceutical industries, agriculture, and loading systems. Not intended for gas media. Installed on the pressure side (tank side). The plug design is based on a ball valve, which ensures completely unobstructed flow. The plug is supplied with polypropylene caps. Connector material: body - AISI 316 steel, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHAMMER LUG coupling type 200 with a wide range of applications (for the transmission of water, air, gas, oil) meets the requirements of most medium pressure applications. The precise fit of the sealing surfaces of the female and male parts ensures reliable pressure sealing. Set: male part, female part + nut. Color: gray (male, female parts), blue (nut). Material: carbon steel A105. Connection: GW NPT. Sealing: metal/metal (cone). Pressure: 2000 PSI (138 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling plug for transfer connection type VK with internal BSP thread and E-CTFE lining. Designed for installation on hose ends or piping systems with external BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Used for the most chemically aggressive media, for which the corrosion resistance of AISI 316 stainless steel is insufficient. E-CTFE features very high chemical resistance over a wide temperature range (approximately from -40°C to +130°C). It is resistant to all acids, alkalis, and other aggressive substances (pH range 1 ÷ 14). It has high mechanical properties, particularly hardness and abrasion resistance. Material: stainless steel. Thread sealing (seal type GD): Teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing adapter with external BSPT thread and internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 3/4" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEAR CLIP clamp ring with 2 ears for mounting various types of low-pressure hoses reinforced with a braid or without reinforcement. Easy and quick assembly using specially designed pliers. Rounded edges inside the ring protect the hose from damage. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbows for butt welding for pressure applications made from pipes. 3D model compliant with standard EN 10253-4 (stainless steel). Equivalent to manufacturing according to standard DIN 2605-1 type 3. With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines, among others as components of complete welded angular ends for metal and rubber hoses (welded with threaded and flanged ends) and other fittings and valve components. Other sizes and materials, including elbows with metric dimensions and elbows according to ASME, are available upon request. Note: These are standard type A fittings according to EN 10253, with the same thickness for the ends to be welded and the body. Their pressure resistance is lower than that of a straight pipe of the same diameter and thickness. The working pressure of the elbow should be determined using the pressure correction factor provided in the standards EN 10253 or DIN 2605-1 (the given values are indicative and range from 0.7 to 0.8 of the pressure corresponding to the dimension of the pipe). Material: AISI 321 steel, AISI 316Ti. Working pressure: from 56 to 208 bar - depending on the diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S2 with external BSPT thread (seal on the thread), manufactured according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a stainless steel version (end fitting) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C - for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube end fitting type RST, without a nut, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible conduits for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
