Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass screw connector for hoses NiTO type A with BSP thread and flat sealing. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNut designed for connecting male and female parts of the HAMMER LUG connector, type 1502. Material: chrome-molybdenum steel 4130.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded nut, type VT124. Material: AISI 316 steel. The given dimensions are for reference and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for IBC pallet container with a vent and internal thread for BSP vent. The cover is supplied with a gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "T" fitting with external BSPT thread type AI 13220 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring type TWO is used). Material: nitrile (NBR, Perbunan). Temperature range (approximate): from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized 90° quick-connect plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with welding connection used for low and high pressure. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal two-piece ball valve with full bore type 2006SC, intended for industrial installations. Lever lock is not available in all sizes. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S4 with external BSP thread (flat sealing), made according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a chrome-plated brass version (end and sleeve) and in a stainless steel version (end) with a chrome-plated brass sleeve. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKN chain for TW connectors (tank truck). Material: AISI 305 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction nipple with external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket cover AKBO DN 11.8 preventing accidental damage. Available in colors: yellow, blue, or black. Material: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight tube connector with hose end type AI 13540 designed for connecting copper pipes to a hose. The range of external diameters of connected pipes is from 6 to 14 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipes for pressure applications manufactured according to standard EN 10216-1 for pipes made of carbon steel. With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines. Material: AISI 321 steel (1.4541), AISI 316Ti (1.4571). Standard pipe length (one section): 6 m. Shipping in sections: 1 m or 2 m, longer sections upon agreement of transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDHS type BANJO bolt with metric thread, with two holes. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with hose end intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, strong clamp with a hinged closure for heavy loads with turned-up edges of the band, recommended for securing thick-walled, reinforced industrial hoses and pipes. The unique design ensures uniform pressure around the entire circumference, providing optimal sealing. The movable bridge allows for multiple installations without the need to remove the hose. Manufactured in accordance with the RoHS Directive 2002/95/EC. Three-point welds on the band, a high-strength screw with a spacer along with securing half-rollers guarantee maximum and reliable pressure. The clamp features markings on the band for minimum and maximum diameter as well as the material from which it is made. The W4 version of the clamp is made entirely of stainless steel and is intended for demanding applications where high corrosion resistance is essential - for marine applications and in the food industry. The hexagonal head of the screw allows the use of commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches. Important! Exceeding the tightening torque value will cause the screw housing to bend; the use of pneumatic tools for installation is not recommended. The band and bridge are made of AISI 304 steel, while the screw and rollers are made of AISI 302 steel. Maximum working pressure up to 45 bar depends on the type of hose and clamp diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for PERROT lever connector. Material: carbon steel, galvanized. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug with internal BSP thread. Material: AISI 316 steel. Working pressure 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4171 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female thread. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhite IBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and external thread for hygienic connections (Rd, IDF, RJT). The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). Designed to facilitate the installation of, for example, a suction pump or ball valve (tap). A tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: polypropylene reinforced with fiberglass. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRDST type adapter with external metric thread, reducing, sealing cone 60°. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd piece - insert according to EN14420-4 with a smooth "tail" for mounting with RS shell clamp or for crimping with TI-LR, TI-LDR. For use in the industry, e.g., for connections with flexible hoses. Material: carbon steel, galvanized. Working pressure: up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrewed end fitting type S1 with internal BSP thread (with flat gasket), manufactured according to standard EN 14424, intended for rubber hoses and certain types of thermoplastic hoses, with soft textile reinforcement (without wire spiral). Commonly used in the fuel sector in fuel and gas distribution lines (e.g., LPG). Basic version made entirely of brass; also available in a chrome-plated brass version (nut and sleeve) and in a stainless steel version (end) with a chrome-plated brass sleeve. Material: brass (B), polyurethane (PU) gasket. Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector (four-way) type AI 13510 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 14 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble nipple with external BSPT thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure precise adherence of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMKV sealing ring with BSP internal thread for TW loading connections. To be used with MKH closing ring. Together they form the MK connection. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (except liquefied gas and steam). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4" type TWO): NBR. Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSymmetrical reduction (concentric reducer) for butt welding for pressure applications made from seamless pipes, compliant with standard EN 10253-4 (stainless steel). With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines, as components of complete welded ends for metal and rubber hoses (welded with threaded and flanged ends) and other fittings and valve components. Other sizes and materials are also available upon request, including reductions of more than two sizes DN and ASME reductions. For type A fittings (EN 10253-4A), the pressure strength may be slightly lower than for a straight pipe of the same diameter D and thickness T. The working pressure of the reducer can be determined using the pressure correction factor provided in the EN 10253 standards (for the specified sizes approximately 1.0 ÷ 0.9 of the pressure corresponding to the dimensions of the pipe). Other types of fittings for butt welding are available upon special request: 45° and 180° elbows, eccentric reducers, tees, end caps. Material: stainless steel AISI 321, AISI 316Ti. Working pressure: from 61 to 185 bar - depending on the diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing "T" fitting with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for NITO end with internal thread type A.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with hose end, with flange, facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with a dual hose end, allowing the installation of hoses with two diameters. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick coupling plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
