Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal two-part, flanged ball valve type 2019S with full bore, lever lock, and actuator connection according to ISO 5211, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: stainless steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: flange PN16 according to DIN 2501. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The characteristic design (does not contain balls and protective sleeves) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK FW connector socket for welding (butt welding) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector socket KLAUDIA with "tail" for hose with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbows for butt welding for pressure applications made from pipes. 3D model compliant with standard EN 10253-2. Equivalent to the execution according to standard DIN 2605-1 type 3. With material certificate EN 10204 3.1. Commonly used in the industry for the construction of installations and pipelines, among others as components of complete welded angular ends for metal and rubber hoses (welded with threaded and flanged ends) and other connections and fittings. Other sizes and materials, including elbows with metric dimensions and elbows according to ASME, are also available upon request. Note: These are standard type A fittings according to EN 10253, with the same thickness for the ends to be welded and the body. Their pressure resistance is lower than that of a straight pipe of the same diameter and thickness. The working pressure of the elbow should be determined using the pressure correction factor provided in standards EN 10253 or DIN 2605-1 (the given values are indicative and range from 0.7 to 0.8 of the pressure corresponding to the dimension of the pipe). Material: carbon steel. Working pressure: from 71 to 262 bar - depending on the diameter.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDRL type double BANJO end for soldering. Material: carbon steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVB plug for TW (tank truck) loading connections. Used for MK (female) parts, it serves as a pressure-resistant cap. Material: aluminum. Operating temperature: from -20°C to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINI clamp with a single screw designed for industrial hoses with relatively small diameters and relatively thin walls. Equipped with a tape tongue that protects the hose from contact with the screw and ensures even circumferential pressure. The turned edges of the clamp do not cause damage to the hose. The clamp fits perfectly and adheres to the surface of the hose, providing a strong, uniform grip. The hexagonal head screw has notches allowing the use of various types of tools for installation. Material: electrolytically galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP internal threaded coupling intended for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction ring NiTO made of stainless steel AISI 316L with external and internal BSP threads. Used in conditions with increased hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Material: AISI 316L steel. Working pressure: up to 25 bar. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with connections for welding for use in pipe connections of industrial installations. Sealing of the screw fitting cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1/2" with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap with internal trapezoidal thread compliant with DIN EN 12713 standard, fully compatible with threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal one-piece ball valve type 2017K with reduced flow and lever lock, intended for industrial installations. It can be used for air, gases, water, steam, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. The working pressure depends on the operating temperature. Body material: stainless steel CF8M. Ball material: stainless steel CF8M. Lever material: stainless steel AISI 304. Ball sealing: PTFE / RTFE. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN connector with internal BSP thread intended for industrial and handling installations of bulk substances and granulates. Not suitable for the transmission of steam and gases. The connector has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: AISI 316 steel. Working pressure: 16 bar. Sealing: black FKM-VITON rubber. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDST type adapter with external metric thread, 60° cone sealing. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional heavy-duty couplings with balls and protective sleeves, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsY-branch connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing coupling with internal BSP thread intended for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUNI-FLEX S type pipe clamp designed for connecting and repairing metal and plastic pipes (non-fixed axial connection, flexible - only with rubber gasket). Application: water, water-based fluids, sewage, light chemicals, air. Material version: AISI 316Ti steel (housing, screws - class A4-80, solid pins). Sealing: EPDM rubber. Operating temperature: from -30°C to +125°C. Nominal pressure: PN 16 (pressure class for shipbuilding and marine applications; safety factor 4:1, assuming a positive result from a one-time pressure test at four times the maximum pressure, after which the clamp cannot be reused). Maximum operating pressure: 25 bar (for other industrial applications and static conditions; safety factor 1.5:1, assuming a positive result from a pressure test at 150% of the maximum operating pressure, after which the clamp can be reused multiple times). The working pressure values apply to the installation of clamps on round steel pipes with a minimum wall thickness, installation according to the instructions, and tightening with a torque wrench specified on the clamp. Available version with incomplete pins, version "L" (example index: UN-FLEX-L-...).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMKH closing ring for TW transfer connections. To be used with MKV sealing ring. Together they form the MK connection. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPipes with a seam for pressure applications made of stainless steel in accordance with standard EN 10217-7 (DIN 17457). Annealed pipes, longitudinally welded by TIG, HF, or laser with a smooth, matte, pickled surface. Weld coefficient v = 1.0. Tolerances D3 / T3. Testing category TC1 or TC2 – depending on the batch. With material certificate EN 10204 3.1. These pipes are characterized by good pressure resistance and can be used for pressure equipment subject to the Pressure Directive (2014/68/EU, PED). Commonly used in the industry for the construction of installations and pipelines. Material: AISI 304/304L (1.4301/1.4307), AISI 316L (1.4404). Standard pipe length (one section): 6 m. Shipping in sections: 1 m or 2 m, longer sections upon agreement of transport costs.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape intended for the production of hose clamps for hoses of any diameter. Standard length: 25 m. Tape width: 8 mm or 14 mm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC tee with external BSP thread, equipped with a gasket and 2x internal BSP threads. Material: polypropylene. Gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing tee with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKMU gasket intended for the socket of the KLAUDIA lever coupling. Material: EPDM. Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 3/4" with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with a double hose end. Used in conditions with increased hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK ERS connector plug with a smooth end for hoses made according to the American military standard MIL-C-27487 (A-A-59326). Commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4330 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP thread/GZ BSP. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN coupling with hose end, with lock (mounting with a shell clamp, compression sleeve, or straps) intended for industrial and bulk material handling installations, granules. Not suitable for steam and gas transmission. The coupling has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: aluminum. Working pressure: 16 bar. Sealing: white NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread connector, type VSL, with a smooth tail for hose, for EN 14420-3 / DIN 2817 clamp (only clamps RS 636... and RS-637...), for installation on industrial hoses - e.g., in handling applications. Also available in AISI 316 stainless steel coated with E-CTFE fluoropolymer lining and conductive CF-E-CTFE lining (R <106 Ω), suitable for very aggressive chemical substances. Working pressure: 25 bar (for AL version - 16 bar, PP - 6 bar). Connector material: brass (MS), AISI 316 stainless steel (SS), galvanized steel (ST), aluminum (AL), polypropylene (PP). Sealing: flat (face). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal DM adaptor with internal BSP thread is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size, material of construction, and manufacturer, the fittings have various shapes of flange for a wrench. Material: AISI 316 steel. Sealing: flat gasket (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). The tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: fiberglass-reinforced polypropylene. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 3/4" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / Details45° elbow with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angle connector for hose, type NA. Designed for use in control systems, in installations for the transport of gases and liquids, in vacuum systems, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUNI-GRIP S type pipe clamp designed for connecting and repairing metal pipes (axially fixed connection, with metal spring rings embedding into the pipe surface and a rubber seal). Application: water, water-based fluids, sewage, light chemicals, air. Material version: AISI 316Ti steel (housing, screws - class A4-80, solid pins). Sealing: EPDM rubber. Operating temperature: from -30°C to +125°C. Nominal pressure: PN 16 (pressure class for shipbuilding and marine applications; safety factor 4:1, assuming a positive result from a one-time pressure test at four times the maximum pressure, after which the clamp cannot be reused). Maximum operating pressure: up to 70 bar, depending on the clamp diameter (for other industrial applications and static conditions, safety factor 1.5:1, assuming a positive result from a pressure test at 150% of the maximum operating pressure, after which the clamp can be reused multiple times). The pressure values apply to the installation of clamps on round steel pipes with a minimum wall thickness, installation according to the instructions, and tightening with a torque wrench specified on the clamp. Available version with incomplete pins, version "L" (example index: UN-GRIP-L-...).
