Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose made of platinum-cured silicone rubber. Used in the pharmaceutical, cosmetic, and biotechnology industries, medical devices, cell culture, sterile filling lines, water for injection (WFI), chemistry and blood analyzers, and liquid chromatography. Can be used in peristaltic pumps – moderate lifespan. Characterized by an exceptionally smooth inner surface that prevents the deposition and adhesion of contaminants inside the hose and the growth of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth inner layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenic ensure total fluid purity in sensitive applications. Meets hygiene requirements of US FDA 21 CFR 177.2600, NSF-51, 3-A, and USP Class VI as well as ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Sterilization possible by steam (30 min, 1 bar, 121°C), ethylene oxide, or radiation (up to 2.5 Mrad). Full roll length of the hose is 15 m. Hose available in inch and metric sizes. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: silicone (platinum). Maximum operating temperature: +204°C. Brittleness temperature: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft, and flexible hose for laboratory and food applications. Ideal for analytical devices, condensers, incubators, desiccators, as gas and drainage lines. Suitable for food and biopharmaceutical products. Also commonly used for cooling computer processors. The glassy smooth, pore-free inner surface prevents the deposition and adherence of contaminants inside the hose and facilitates cleaning. Complete repeatability of hose parameters across all batches. Can be used with peristaltic pumps, but lifespan is limited. The hose is free from phthalates and BPA (Bisphenol A). Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. Sterilization possible by steam, ethylene oxide, or radiation. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full roll length of the hose is 15 m. Available VACUUM version with thicker walls for vacuum applications. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality, flexible hose in cream color, specifically designed for the pharmaceutical industry, biotechnology, and laboratories. It has high fatigue resistance, exceptionally long service life in peristaltic pumps, and good resistance to spallation (the chipping of micro-particles from the hose material due to rotor pressure). It also features very low permeability to gaseous media, low absorption levels of transmitted products, and good resistance to acids, bases, and oxidation. Ideal for use in diagnostic processes, sampling and culturing of in vitro cell cultures, vaccine production, bioreactors, sterile filling lines, fermentation processes, extraction, and purification. The opaque wall of the hose protects sensitive products from UV radiation. The hose complies with USP Class VI requirements and is completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Compliant with ISO 10993 for contact with blood, bodily fluids, and tissues for up to 30 days. Meets NSF-51 requirements for food contact. Multiple sterilization by steam in autoclaves is possible (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (gamma Cobalt 60 up to 5 Mrad). Flame resistant (UL 94-HB). Full hose roll length is 7.5 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: thermoplastic elastomer (TPE). Operating temperature: from -51°C to +135°C. Brittleness temperature: -75°C. Hardness: 64° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International with strict standards maintained. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack flexible universal hose with exceptional resistance to aging, weather conditions, and ozone, with good chemical resistance. Resistant to temperatures in a wide range from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, resistant to abrasion. Excellent for use in peristaltic pumps. Used for transfer and dosing in industry and services, e.g., for dispensing soap and disinfectants, cleaning agents, caustic soda, etching and galvanizing chemicals, in glass and window washing systems, etc. The soft hose material (61° Shore (A)) is very flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used hoses made from traditional rubber blends such as EPDM and chloroprene. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone (300 pphm). Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Characterized by low gas permeability compared to rubber hoses. Hose connection by welding is possible. The VACUUM version with thick walls is designed for continuous operation with vacuum and is resistant to cracking and aging. Full hose roll length: 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy-beige flexible hose, odorless and tasteless, non-toxic. Resistant to temperatures ranging from -60°C to +135°C. Extremely flexible, elastic, with high fatigue resistance to deformation, abrasion-resistant. Excellent for use in peristaltic pumps. Used for dispensing and portioning cold and hot food products, for soap, detergents, and disinfectants, for paints and toners, pesticides and fertilizers, as well as in laboratories. The soft hose material (61° Shore-A) is highly flexible and provides excellent longevity of up to 1000 hours of operation in a peristaltic pump. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets FDA 21 CFR 177.2600 requirements for food contact. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning in the installation, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Material: TPE (Norprene® – thermoplastic elastomer). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCreamy, flexible chemical hose with a multi-layer construction designed specifically to combine chemical resistance with high longevity in peristaltic pumps. Smooth inner layer with very good chemical resistance, free of plasticizers, resistant to acids, bases, salts, alcohols, and ketones, with low absorption and adsorption of water-based fluids. Outer layer made of thermoplastic elastomer (Norprene®) provides excellent properties and high longevity when used in peristaltic pumps. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1520 and is resistant to most cleaning and disinfecting agents. Sterilization by steam, ethylene oxide, or radiation. Ideal for dosing soap and detergents, laundry detergents, and dishwashing liquids. Used for the production and dosing of various chemicals in all sectors of industry. Full hose roll length is 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: polyolefin / TPE (Norprene® - thermoplastic elastomer). Operating temperature: from -60°C to +74°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTranslucent, yellow, flexible hose designed specifically for fuel and lubricating oils. Resistant to swelling and hardening due to hydrocarbon exposure, significantly reduces the risk of cracking and leakage. Minimal extractability ensures fuel cleanliness, and low permeability to aromatic substances protects the operator and the environment. Ozone and UV radiation resistant. The flexibility of the hose facilitates installation even in tight spaces. The translucent wall allows for flow monitoring. The hose is resistant to most petroleum products and fuels (including those with up to 10% ethanol) and can be used for gasoline, kerosene, diesel, heating oil, lubricants, cutting fluids, and glycol-based fluids. Widely used and proven in thousands of applications: small engines, automotive, recreational vehicles, lawn mowers, saws, cooling and lubrication systems, cutting and polishing equipment. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, reinforced flexible hose made of platinum-cured silicone rubber. Designed for higher pressures. Used in the pharmaceutical, cosmetic, food, biotechnology industries, sterile filling lines, water treatment systems, vaccine production, bioreactors. Characterized by an exceptionally smooth internal surface that prevents the deposition and adhesion of contaminants inside the hose and the development of bacteria. This facilitates complete cleaning and sterilization of the hose. The smooth internal layer also reduces flow resistance through the hose. Low extractability, non-toxicity, non-hemolytic, and non-pyrogenicity ensure total fluid purity in sensitive applications. Minimal biological load (bioburden). Meets hygienic requirements of the American FDA 21 CFR 177.2600, 3-A, and USP Class VI. Sterilization possible by steam (30 min, 1 bar, 121°C), CIP and SIP cleaning of installations, ethylene oxide, or radiation (up to 5 Mrad). Full hose roll length 15 m (from internal diameter 31.8 mm – 7.5 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: silicone (platinum). Maximum operating temperature: up to +160°C. Brittleness temperature: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible hose completely free of plasticizers for chemical and food applications - requiring high chemical resistance due to the nature of the substances (e.g., wine - alcohol, acids - orange juice) or used cleaning and disinfecting agents. Resistant to acids, bases, salts, alcohols, and ketones, with very low levels of absorption and adsorption. This minimizes the risk of changing the properties, taste, and smell of the fluid even with repeated use of the hose. The glassy smooth, pore-free inner surface prevents the deposition and adherence of contaminants inside the hose and facilitates cleaning. Resistant to chemical cleaning and disinfecting agents. Not recommended for hydrocarbons. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA 21 CFR 177.1520, NSF-51. Possible sterilization with ethylene oxide or radiation (up to 2.5 Mrad). Compliant with REACH - does not contain hazardous and prohibited substances. Proper incineration of used hoses does not release hazardous substances (e.g., hydrochloric acid). The hose is used for both food substances (e.g., wine dispensing) and chemical applications: detergent installations, ink dispensing, acid filling for batteries, chemical analyzers. Full hose roll length 15 m (for internal diameter 25.4 mm - 7.5 m). The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: polyolefin. Operating temperature: from -75°C to +54°C. Brittleness temperature: -75°C. Hardness: 75° Shore (A). Density: 0.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, strong, and flexible hose made of polyester-polyurethane, free of plasticizers, exceptionally resistant to abrasion and tearing, characterized by flexibility even at low temperatures and withstands cyclic temperature changes. The hose is produced with strict dimensional tolerances from batch to batch, ensuring safe, repeatable connections with fittings. Resistant to oils, greases, fuels, and a range of chemicals. Durable against weather conditions and intensive daily use. It is used in various industrial sectors: fuel and lubrication systems, for cooling fluids in automotive applications, for air in pneumatics and industrial automation, for the transfer of abrasive and viscous products, sludges, and powders, as well as for electrical hose protection. Full hose roll length is 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: tygothane® - polyurethane-polyester (PU). Operating temperature: from -73°C to +79°C (temporarily up to +93°C). Brittleness temperature: -73°C. Hardness: 82° Shore (A). Density: 1.20 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft, and highly flexible hose with exceptionally long service life for use in peristaltic pumps (LFL - "long flex life"). It has high fatigue resistance and exceptional spallation resistance (spallation - chipping of hose material particles due to pump rotor pressure). One of the best TYGON® hoses for peristaltic pumps - service life of 1000 hours (at back pressure of 0 bar). Resistance to particle spallation eliminates the need for frequent filter replacement and minimizes the risk of contamination. Suitable for high-viscosity fluids, viscous fluids, and shear-sensitive fluids. Widely used in the food, cosmetic, pharmaceutical, and chemical industries, in production and laboratories. The hose is free from phthalates and BPA (Bisphenol A). It meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF, USP Class VI, international ISO 10993, Japanese #370/1959. Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Full hose roll length is 7.5 m (from internal diameter 19 mm - 3 m). Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -46°C. Hardness: 56° Shore (A). Density: 1.17 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, colorless, transparent, flexible hose that is odorless and tasteless, non-toxic, and free of DEHP phthalates. Specifically designed for use in peristaltic pumps. Used for dispensing and portioning cold and hot food products, for soaps and detergents, for paints, and in laboratories. The soft hose material (60° Shore (A)) is highly flexible and provides excellent longevity of over 500 hours of operation in a peristaltic pump. The hose is a good alternative to commonly used PVC or silicone hoses. It remains flexible even at -40°C and withstands elevated temperatures up to +121°C. It has good chemical resistance to a range of chemicals, such as acids and bases. Not recommended for fats, high-proof alcohols, and hydrocarbons. Resistant to ozone, oxygen, and sunlight, and is difficult to ignite. Characterized by low extractability (migration of material components into the medium). Meets hygiene and food contact requirements: European 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51. Sterilization possible by steam, ethylene oxide, or radiation. Full hose roll length: 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: tygoprene® - thermoplastic elastomer styrene (TPE). Maximum operating temperature: up to +121°C. Brittle temperature: -66°C. Hardness: 60° Shore (A). Density: 0.9 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, and flexible hose made of fluoroelastomer (Viton), resistant to fuels, solvents, oils, and chemicals, particularly at elevated temperatures. Used for concentrated acids, bases, alcohols, chlorinated and aromatic solvents, hot fuels, and oils. Suitable for peristaltic pumps. Resistant to aging, ozone, sunlight, and weather conditions. Flame-retardant. The opaque black wall of the hose protects light-sensitive substances. Used in laboratories and general industrial applications. Provides an economical alternative to VERSILONTM F-5500-A hose. Full roll length of the hose is 50 m (for internal diameters from 4 mm to 12 mm - 25 m, from 15 mm - 5 m). The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: fluorine rubber (FKM). Operating temperature: from -20°C to +200°C (temporarily up to +300°C). Brittleness temperature: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrystal clear, flexible, and completely biocompatible medical hose free of phthalates (DEHP). Intended for use in dialysis equipment, blood transfusion and drainage, infusion, chemotherapy, inhalation, minimally invasive procedures, catheters, and medical laboratories. Can be used with peristaltic pumps, but lifespan is limited. High transparency of the hose and non-wettability of the inner surface ensure good flow visualization and easy complete drainage of the hose. Can be connected with mechanical clamps, thermally welded, ultrasonically welded, or glued. Compliant with ISO 10993, European Pharmacopoeia 3.1.1.2, USP Class VI, and REACH requirements. Completely non-cytotoxic, non-hemolytic, and non-pyrogenic. Sterilization by steam in autoclaves, ethylene oxide, or radiation (up to 2.5 Mrad). Full hose roll length is 15 m. Medical hoses of different hardness are available, e.g., TYGON® ND100-80 (hardness 80° Shore (A)). The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special, DEHP-free). Maximum operating temperature: +74°C. Brittleness temperature: -42°C. Hardness: 65° Shore (A). Density: 1.19 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCream-beige flexible hose reinforced with polyester braid, odorless and tasteless, non-toxic. Resistant to temperature over a wide range from -60°C to +135°C. Flexible and elastic, resistant to deformation and abrasion. Used for pressure transfer, dispensing, and portioning of cold and hot food products, for soaps, detergents, and disinfectants, for paints and toners, pesticides, and fertilizers. The hose is an alternative to commonly used PVC or silicone hoses. It has good chemical resistance to a range of chemicals, particularly acids and bases, oxidizing agents such as hydrogen peroxide, sodium hypochlorite, or ozone. Resistant to a variety of animal and vegetable fats. Not recommended for hydrocarbons. Resistant to aging and UV radiation. Meets hygiene requirements and food contact standards - US FDA 21 CFR 177.2600, NSF-51, and 3-A. Multiple sterilization possible with steam in autoclaves, CIP and SIP cleaning of installations, ethylene oxide, or radiation methods. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: norprene® - thermoplastic elastomer (TPE). Maximum operating temperature: up to +135°C. Brittleness temperature: -60°C. Hardness: 61° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of odor and taste, non-toxic, phthalate-free and BPA (Bisphenol A) free. Designed for the transfer and dispensing of food products, particularly dairy products, spices, vitamin concentrates, flavors, etc. The smooth, non-porous inner surface of the hose eliminates the problem of product particle settling and bacterial growth. Resistant to alkaline cleaning agents. Can be used with peristaltic pumps (moderate lifespan). Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full roll length of the hose is 15 m (from an inner diameter of 50.8 mm - 6 m). Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystal-clear, flexible chemical hose with a multi-layer construction featuring an inner layer made of FEP fluoropolymer with unique resistance and chemical inertness. It exhibits significantly greater flexibility than rigid hoses made entirely of Teflon or other fluoropolymers. The smooth inner layer, resistant and chemically inert, eliminates the risk of fluid contamination. Resistant to a wide range of chemicals from corrosive substances to MEK-based solvents. The hose meets hygiene requirements and is suitable for food contact: US FDA 21 CFR 177.1550, free from phthalates and BPA (Bisphenol A), non-toxic, and does not leave any odor or taste. Sterilization with ethylene oxide. Used in various industrial applications: chemical flow, pharmaceuticals, food and beverage production and packaging, paint, solvent and adhesive manufacturing, inks and toners, photographic chemicals, fertilizers and pesticides, in semiconductor production. Full hose roll length: 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: special FEP / PVC. Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnown and proven for years, a lightweight and soft natural rubber hose in light brown color. Easy to install due to its softness (hardness 40° Shore – A), flexibility, and elasticity (maximum elongation 500%). It has properties similar to latex. Abrasion-resistant, with good resistance to acids and bases. Used for liquids and gases, for various industrial applications such as dispensing and dosing soaps and detergents, alcoholic and dairy products, laboratories. Sterilization with steam for 30 minutes (1 bar, 141°C) or ethylene oxide. Full hose roll length is 50 m (from inner diameter 7 mm - 25 m). The specified working pressure is determined relative to the burst pressure with a safety factor of 1:5. Material: natural rubber (NR). Operating temperature: from -35°C to +70°C (120°C for moist heat). Brittleness temperature: -40°C. Hardness: 40° Shore (A). Density: 0.98 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible fuel hose with exceptionally low fuel vapor permeability through the hose wall. Meets American EPA and CARB requirements (permeability up to 15 g/m2/24h). Patented multi-layer hose construction with an inner layer of PVDF fluoropolymer resistant to fuels containing up to 100% ethanol. Resistant to swelling and hardening due to hydrocarbons, significantly reduces the risk of cracking and leakage. Minimal extractability ensures fuel purity, and the exceptionally low aromatic substance permeability protects the operator and the environment. Ozone and UV radiation resistant (ANSI B175.1 D). The flexibility of the hose facilitates installation even in tight spaces and is maintained at low temperatures, ensuring hassle-free fuel withdrawal in any position. The transparent wall allows for flow monitoring. Thanks to the inner layer of PVDF, the hose is resistant to most chemicals and fuels. It can be submerged in fuel (only not recommended for repeated use at high external temperatures). Flame retardant (UL 94 HB). Used in modern lawn mowers, chainsaws, gas drills, hedge trimmers, and other gardening machines. Full hose roll length is 15 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVDF / TPE (multi-layer). Operating temperature: from -40°C to +82°C. Brittleness temperature: -90°C. Hardness: 78° Shore (A). Density: 1.27 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, glassy transparent, flexible hose free of phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products, particularly juices, beverages, and bottled water. Does not alter the taste and smell of products, and its non-wetting properties allow for complete drainage and easy cleaning by rinsing. Can be used with peristaltic pumps, but the lifespan is moderate. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF61, 3-A, Japanese #370/1959 and MHLW370(3-D). Sterilization by steam or ethylene oxide is possible. Compliant with REACH and California Proposition 65 – does not contain hazardous and prohibited substances. Full hose roll length is 15 m (from internal diameter 50.8 mm - 6 m). The specified working pressure is relative to the burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, universal laboratory hose free of phthalates (DEHP). An excellent solution for complex laboratory equipment installations requiring small bend radii and multiple curves. This ultra-soft hose is resistant to twisting and kinking and remains flexible at low temperatures (down to -55°C). Due to its softness, it does not require high forces for compression, making it an ideal solution for peristaltic pumps with low torque or battery-powered. It has a longer lifespan in peristaltic pump applications compared to typical silicone hoses, while also possessing good chemical resistance to a range of corrosive media (acids, bases, salts, alcohols). Compliant with FDA requirements for food contact and REACH. Sterilization only with ethylene oxide. Full hose roll length: 15 m. The specified working pressure is defined relative to the burst pressure with a safety factor of 1:5. Material: PVC (special, DEHP-free). Maximum operating temperature: +52°C. Brittleness temperature: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible reinforced hose designed for higher pressures. Made of polyether - polyurethane, free of plasticizers, exceptionally resistant to abrasion and tearing, characterized by a small bending radius and flexibility even at low temperatures. Withstands cyclic temperature changes. Resistant to oils, greases, fuels, and a range of chemicals. Used in various industrial sectors: transfer of abrasive and viscous products, sludges and pastes, transfer of granules and powders, lubrication and degreasing, for cooling fluids in automotive applications, for air in pneumatics and industrial automation. Used in the food and cosmetic industries - meets FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 requirements for food contact and NSF-61 for use with drinking water (with hose length limitations depending on diameter). Full hose roll length 30 m (from internal diameter 31.8 mm - 15 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: tygothane® - polyurethane - polyether (PU). Operating temperature: from -73°C to +82°C. Brittleness temperature: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, high-quality flexible hose made of fluorine rubber, resistant to solvents, fuels, oils, aggressive chemicals, also under elevated temperature conditions. Used for cleaning solvents (dry cleaning, solvent recovery systems), aggressive chemicals, acids and bases, hot oils and fuels. Suitable for peristaltic pumps. Resistant to ozone, sunlight, and weather conditions. The opaque black wall of the hose completely protects light-sensitive substances. The production process of the hose with post-vulcanization heating removes any residues and ensures minimal outgassing, required in vacuum and space applications. Full roll length of the hose is 15 m. Working pressure specified relative to burst pressure with a safety factor of 1:5. Material: fluoroelastomer (FKM). Maximum operating temperature: +204°C. Brittleness temperature: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced polyester braided hose, odorless and tasteless, non-toxic, free from phthalates and BPA (Bisphenol A). Designed for the transfer and dispensing of food products under higher pressure. Smooth, non-porous inner surface of the hose eliminates the problem of product particle settlement and bacterial growth. Resistant to alkaline cleaning agents. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Possible sterilization with ethylene oxide. After installing fittings with appropriate hygienic design, cleaning by CIP method is possible. Full hose roll length 15 m (from internal diameter 38.1 mm - 6 m). Working pressure defined relative to burst pressure with a safety factor of 1:4. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystal-clear, flexible hose free of odor and taste, non-toxic, phthalate-free, and BPA (Bisphenol A) free. Designed for the transfer of milk and dairy products, used in milking equipment. The smooth, non-porous inner surface of the hose eliminates the problem of fat deposition, product particles, and bacterial growth. The built-in blue tape on the hose wall assures the customer of receiving the original TYGON® S3™ M-34-R hose, specifically designed for transporting raw milk. Meets hygiene and food contact requirements: European 1935/2004/EC and 10/2011 EU (for conditions and substances according to certification), American FDA, 3-A, Japanese MHLW370(3-D). Cleaning by rinsing according to a special procedure. Compliant with REACH and California Proposition 65 - does not contain hazardous and prohibited substances. Full hose roll length: 30 m. Working pressure defined relative to burst pressure with a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. Brittleness temperature: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: Product packaged in the Clean Zone of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTraditional, well-known, and proven over the years, hose made of natural red rubber. Easy to install due to its softness (hardness 45° Shore – A), flexibility, and elasticity. Resistant to abrasion, with low permeability for gases and good resistance to acids and bases. Used for liquids and gases for various industrial applications and in laboratories. Meets FDA requirements for food contact. Sterilization by steam for 30 minutes (1 bar, 141°C) or ethylene oxide. Full hose roll length is 25 m. The specified working pressure is determined relative to the burst pressure with a safety factor of 1:5. Material: natural rubber (NR). Operating temperature: from -30°C to +70°C (125°C for moist heat). Brittleness temperature: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: Product packaged in the Clean Room of Tubes International (CLEAN ROOM) adhering to strict standards. Return of the product after opening the packaging is not possible.
