Is the Adaptor - cap with GW BSP, carbon steel, type A112A compatible with high-pressure systems and what is its maximum pressure rating?

Yes. The Adaptor - cap with GW BSP, carbon steel, type A112A (high-pressure plug type A112A with internal BSP thread, hexagonal head, carbon steel, galvanized) is designed for high-pressure applications. Its maximum allowable pressure depends on the specific size (thread diameter) and the applicable standards for carbon steel plugs with BSP threads, but typical galvanized carbon-steel BSP caps of this construction commonly withstand working pressures in the range of 250â420 bar (3,625â6,090 psi) for smaller sizes, with lower ratings for larger diameters. For exact maximum pressure rating for your specific size and service conditions (temperature, medium, thread class), consult the manufacturerâs technical datasheet or pressure table for type A112A or contact the supplier to obtain the certified working pressure and safety factors.

Does the Adaptor - cap with GW BSP, carbon steel, type A112A require specific installation torque for the hexagonal head?

Adaptor - cap with GW BSP, carbon steel, type A112A Format: Based on the description (high-pressure plug type A112A with internal BSP thread, hexagonal head, carbon steel, galvanized), no specific installation torque is provided. General practice: tighten to a firm, leak-free fit using an appropriate wrench, avoiding excessive torque that can strip threads or deform the hex head. For pressurized or critical systems, follow system manufacturer torque specs or use standard torque values for carbon steel BSP fittings of the corresponding size (consult torque tables) and apply thread sealant or PTFE tape as recommended. If exact torque is required, obtain manufacturerâs datasheet or technical support.

Can Adaptor - cap with GW BSP, carbon steel, type A112A resist corrosion in marine environments?

Adaptor - cap with GW BSP, carbon steel, type A112A Format Adaptor - cap with GW BSP, carbon steel, type A112A Format described as carbon steel, galvanized (zinc-coated), offers limited corrosion resistance in marine environments but is not optimal for long-term exposure to sea water or highly corrosive atmospheres. Galvanization provides a protective zinc layer that delays corrosion by sacrificial protection, which can be effective against mild moisture, occasional splashing, and short-term outdoor use. However, in marine conditions. characterized by high salinity, continuous humidity, and salt spray. galvanized carbon steel is prone to rapid coating degradation (pitting, white rust on zinc, and eventual exposure of base steel), leading to accelerated corrosion. For reliable corrosion resistance in marine environments, consider materials or treatments superior to standard galvanization: - Stainless steel (e.g., 316/316L). excellent resistance to chloride-induced corrosion. - Duplex stainless steels. higher strength and improved chloride resistance. - Non-metallic options or additional protective coatings (e.g., epoxy, hot-dip galvanizing with thicker coatings, or specialized marine-grade plating) can improve performance but require careful selection and maintenance. Conclusion: Adaptor - cap with GW BSP, carbon steel, type A112A Format with standard galvanization can resist corrosion only for limited periods in marine settings; for long-term durability and safety in continuous or harsh marine exposure, choose stainless steel or specially treated alternatives.

Adaptor – cap with GW BSP, carbon steel, type A112A

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	30

Adaptor – high-pressure plug type A112A with internal BSP thread, with hexagonal head. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A112A-04	Blind plug G1/4 BSP	-	350	In stock	Enquiry
TI-A112A-06	Blind plug G 3/8 BSP	-	250	In stock	Enquiry
TI-A112A-08	Blind plug G1/2"	-	225	In stock	Enquiry
TI-A112A-12	Blind plug G1/2 BSP 3/4	-	200	In stock	Enquiry
TI-A112A-16	Blind plug G1 BSP 1	-	160	In stock	Enquiry
TI-A112A-20	Blind plug G1/4"	-	160	In stock	Enquiry
TI-A112A-24	Blind plug G1/2 BSP 1.1/2	-	160	In stock	Enquiry
TI-A112A-32	Blind plug G1/2 BSP 2	-	100	In stock	Enquiry