Is the THERMOCLEANÂ® hose nozzle with clamping sleeve and hygienic finish made from AISI 304 stainless steel corrosion-resistant and suitable for food environments?

Yes. The THERMOCLEANÂ® hose nozzle with clamping sleeve and hygienic finish is made of AISI 304 stainless steel, which provides good corrosion resistance and is commonly used in food industry applications. Its hygienic finish and integration with the THERMOCLEANÂ® flexible hose indicate it is designed for cleanable, food-safe environments. However, if the application involves aggressive chemicals, high chloride exposure, or requires certification to specific food-contact standards (e.g., NSF, FDA, EU regulations), verify those requirements and consider AISI 316 stainless steel or certified components as needed.

Does the THERMOCLEANÂ® hose nozzle with clamping sleeve and hygienic finish meet food-grade hygiene standards and certifications?

The THERMOCLEANÂ® hose nozzle with clamping sleeve and hygienic finish is made from AISI 304 stainless steel and features an integrated clamping sleeve with a hygienic finish tailored for the flexible THERMOCLEANÂ® hose. AISI 304 provides good corrosion resistance and is commonly used in food-related applications, and the hygienic finish reduces crevices where contamination can accumulate. However, from the provided description alone no specific food-grade certifications (e.g., FDA, EU 1935/2004, NSF) or tested compliance are stated. Therefore, while the design and material are compatible with food-industry use, formal confirmation of meeting official food-grade hygiene standards requires documentation or certification from the manufacturer.

What cleaning agents and temperatures are safe for the THERMOCLEANÂ® hose nozzle with clamping sleeve?

The THERMOCLEANÂ® hose nozzle with clamping sleeve is made of AISI 304 stainless steel and features a hygienic finish. Safe cleaning agents and temperature guidelines: - Alkaline and neutral detergents: Safe. Use commonly recommended food-industry alkaline cleaners and neutral detergents for stainless steel. They effectively remove oils, proteins and general soils without damaging AISI 304 when used at recommended concentrations. - Chlorine-based cleaners (bleach): Use with caution. Low concentrations (ppm levels typical for sanitation) are generally acceptable for short contact times, but repeated or prolonged exposure to high concentrations can promote corrosion or pitting in AISI 304. Rinse thoroughly after use. - Acidic cleaners/descalers: Use with caution and only when necessary for scale removal. Mild acid solutions (diluted citric or phosphoric acid) can be used for short durations; strong mineral acids (hydrochloric, sulfuric) and high concentrations should be avoided because they can attack AISI 304. - Solvents and specialty agents: Non-chlorinated solvents compatible with stainless steel are acceptable for removing specific residues. Avoid aggressive halogenated solvents that may harm the metal or hygienic finish. - Temperature: AISI 304 retains good corrosion resistance and mechanical properties across typical cleaning temperatures. Clean with hot water up to about 80â90Â°C (176â194Â°F) for manual or mechanical cleaning. For steam or high-temperature CIP, short exposures at higher temperatures are tolerated, but avoid prolonged exposure above 100Â°C if seals or any non-metallic components are present in the clamping sleeve assembly. - Mechanical cleaning: Soft brushes and non-abrasive pads are recommended to preserve the hygienic finish. Avoid steel wool or highly abrasive tools that can scratch the surface and reduce corrosion resistance. - Rinse and dry: Thoroughly rinse all cleaning agents and dry or allow to drain to prevent residue or pooling that could promote corrosion. If the system includes nonâmetal parts (seals, gaskets) or if you plan to use aggressive chemistries or very high temperatures, consult the equipment supplier for specific compatibility and concentration/time limits.

THERMOCLEAN® hose nozzle

Additional information

Material	SS – stainless steel

Special nozzle integrated with a clamping sleeve with a hygienic finish designed for the flexible hose THERMOCLEAN®. Material: AISI 304 stainless steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TR-THERMO-12-BZ140-08-SS	End fitting for THERMOCLEAN hose 1/2" with GZ 1/2" BSP, AISI 304	12	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Special nozzle integrated with a clamping sleeve with a hygienic finish designed for the flexible hose THERMOCLEAN®. Material: AISI 304 stainless steel.