Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for hot water mixed with fluids anti-freeze. used in systems cooling and heating, for pumps in engines and machines. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. made in accordance with the standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the diameter hose. Operating temperature: od -40°C up to +120°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four layer spiral wire steel. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 445 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSemi-transparent, yellow, flexible hose designed specially for fuels and oils lubricating. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV. flexibility hose facilitates its installations even in tight places. semi-transparent wall allows na monitoring flow. hose is resistant na most products petroleum-based and fuels (also with addition ethanol for 10%) and can be used for gasoline, kerosene, oil drive and heating, agents lubricating, coolants for cutting and na base glycol. commonly used and proven in thousands applications: small engines, automotive, vehicles recreational, mowers garden, saws, installations coolant and lubrication, equipment for cutting and polishing. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyurethane hose spiral intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to abrasion, breaking and kinking, with success used also in industry automotive. its high flexibility maintained is even po many years use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with a male BSP threadT (without springs for diameter outer 16 mm). The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on the diameter hose). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA very light, flexible suction-delivery hose intended for conveying chemical substances. made with thermoplastic vulcanizate TPV – material combining advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows na use go for many substances, among others acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant na conditions atmospheric, aging and abrasion (abrasion resistance compliant with ISO 4649:150 mm 3 ). low weight and small radius bending hose ensure ease operation, co can be advantage at transfer with tankers and container. Na special order Available version VACUPRESS SUPER CHEMI (diameter for 63 mm) with layer inner lined polyethylene (LLDPE) co increases resistance chemical hose and allows its use among others for concentrated acids hydrochloric and sulfuric, for acid nitric and for aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: braid polyester, spiral steel galvanized. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +20°C : od 7 up to 15 bar - depending on diameter hose. temperature use: from -25°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +130°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-FXAM-10 is: 70 bar – (170°C-160°C) x 1 = 70 bar – 40% = 42 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid aramid. pressure working: from 35 bar to 77 bar - depending on diameter hose. temperature use: from -70°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose delivery of reinforcement steel for conducting steam saturated. Layer inner o sound resistance na high temperature, steam saturated and phenomenon pop-corningu (destruction layer internal through penetration condensate steam). withstands momentarily steam superheated o temperature 230°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant na temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. factor safety: 10:1. length standard: 60 m. Inner layer: black rubber IIR. Reinforcement: double steel wire cord. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for high-pressure systems grease constant. standard: DIN 1283. Inner layer: polyester. Reinforcement: single a synthetic braid. Outer layer: polyurethane (130A), micro-perforated polyurethane (130C). Operating temperature: od -40°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible high quality hose polyurethane with a braid manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. hose strong od similar hoses, PVC, retaining its shape, resistant to kinking, hydrolysis and abrasion, flexible in low temperatures. Contains no cadmium, silicone, plasticisers or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: a polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at a temperature of 20°C: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: from -30°C to +70°C (momentarily +100°C). As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling NiTO of AISI 316 stainless steelL with a thread external BSP. Available in two systems: 1/2″ and 3/4″. Used in conditions of increased requirements for hygiene and corrosion resistance (e.g. the food industry, hospitals). element from different systems cannot be connected directly, e.g. a 1/2″ socket with a 3/4″ plug. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Material sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling with a BSPT male thread and a shut-off valve, intended for installations water, chemical, pneumatic, itp. Compared to massive traditional couplings with balls and a locking sleeve, it has a very low weight. A very efficient valve allows large flow rates and minimal leakage. This coupling also allows slight rotation of the connected hose, which prevents it from twisting and accidental disconnection. Applications: chemical photographic processes, filling installations for batteries and accumulators, sprayers, pneumatic installations and non-freezing liquids, etc.. It is characterized by high mechanical strength and chemical resistance. They are suitable for autoclaving. Length L - total length. Material: polysulfone. Sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling plug with a flange PN10, type F.46, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling plug with a thread external BSP with wide application np.: for transferring and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pressure and vacuum pumps, for building temporary water and air installations in construction, mining and agriculture, and for irrigation systems. Material: steel carbon, galvanized. Maximum Working pressure: 12.5 bar (for fluids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve 2" in the "premium" version for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. As standard, equipped with a polyethylene (LDPE) gasket, which is characterized by very high resistance to chemicals compared to standard rubber seals such as EPDM, NBR or Viton. The valve is additionally equipped with a locking latch and a cap. Available valve outlet connection: male thread (trapezoidal, NPT) or CAMLOCK A plug. Material: polypropylene. Sealing: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality two-way ball valve type BKH L/S with external a thread metric, DIN 2353, intended for high-pressure installations hydraulic. Available as: L (light series), S (heavy series). Material: steel (body, ball, stem). Seals: PA (ball), NBR (stem). Operating temperature: from -40°C to +100°C (PA): from -20°C to +100°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation, securing against overload and stroke pressure during opening and enabling replacement. version straight (FT290) and version angled 90° (FT291). possibility mounting panel on the thread under knob. On special order available also in made of steel stainless AISI 316. Material: galvanised carbon steel (body), steel carbon (needle), polyamide 66 (knob). sealing: NBR/PTFE. Working pressure: 350 bar. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShut-off valve type V3V L, two-position, three-way, with venting of the pneumatic system, terminated with push-in connections on both sides (hose - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPRI used in systems hydraulic as element for closing flow fluid hydraulic in one direction and opening free flow fluid in direction opposite. Intended for screwing into an appropriately deep threaded hole. Supplied together with an O-ring, which constitutes sealing between valve, a threaded a hole. O-ring can install with one or the other side valve (depending on direction flow, which we want obtain). standard pressure opening: 0.5 bar. Permissible flow direction: A → A1. Material: steel galvanized (body), hardened steel (stem). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set plate end for system SKILLAIR, series 100, 200, 300 or 400.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting socket reducing systemu STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBulkhead fitting, type B4, with a cutting ring, designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on 90° angled coupling, type C6, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow through-flow, series F type R 4 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality coupling straight, made entirely of steel AISI 316L, series 60040. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter enabling connection gauge with a thread 1/8" for coupling 1/4", O-ring. Material: steel carbon. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsASTA version cover PROTECTOR completely antistatic, intended for use pod earth and in other special environment, which require conductive surfaces. compliant with the standard EN ISO 80079-36:2016, which is connected with the directive ATEX for devices non-electrical in spaces hazardous explosion. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for lances. Material: steel stainless. Connection: 1/4" NPT male. Working pressure: up to 350 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN 115 quick-coupling socket with a male thread and with a valve intended for hydraulic installations at very high pressures. Used in hydraulic presses, rescue equipment, hydraulic lifts, cutters, etc. Optionally, the socket can be fitted with a ring to prevent accidental disconnection. Supplied as standard with a cap to protect against contamination. Material: hardened steel, galvanized. Sealing: NBR. Flow: 6 l/min (Δp = 4 bar). Nominal diameter: 2.5 mm. Working pressure: 1000 bar (coupling connected). Burst pressure: 2600 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1/2" with a hose end and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils). For the valve, an EPDM O-ring.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK CRS with smooth fitting for hose (for a shell clamp) made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling socket with a thread external BSP, type F.14, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling socket with a weld-on connection with wide application np.: for transferring and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pressure and vacuum pumps, for building temporary water and air installations in construction, mining and agriculture, and for irrigation systems. When selecting a coupling for a medium other than water, attention should be paid to the correct selection of the gasket material. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. Maximum Working pressure: 12.5 bar (for fluids), 8 bar (for air). Vacuum tightness. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling socket with a flange PN 10 with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type R-4000 designed and manufactured in accordance with the PED 2014/68/EU directive. intended for high-pressure installations hydraulic and industrial. It closes the flow of medium in one direction and opens free flow of medium in the opposite direction. standard pressure opening: 0.5 bar (also available 1, 2, 3 and 5 bar). Permissible flow direction: A → A1. Material: steel galvanized, brass nickel-plated, steel stainless AISI 316L. Sealing: NBR - standard RA, RL; Viton (FKM) - standard RZ; EPDM - option. Operating temperature: from -20°C to +100°C (NBR); from -20°C to +200°C (Viton); from -40°C to +150°C (EPDM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal NPT, type 100H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow socket systemu STECKO for use in hydraulic systems for mining. Material: free-cutting steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPN16 fixed flange type CNWF made of AISI 304 steel with a "tail" for a hose. Intended for rubber hoses and industrial plastic hoses. Assembly by means of bands or clamps. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting flange 90° NON SKIVE SAE 6000 (SFS 90), series heavy, intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
