Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPush-on bulkhead coupling, type C4, designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and clamping it by tightening the nut. Material: nickel-plated brass. Working pressure: 18 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality coupling bulkhead straight, made entirely of steel AISI 316L, series 60050. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight, type R19, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with a thread external for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: brass. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter 2-position VME1-000 intended for mini valves VME or valves mounted in panel control with series 70.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with BSP male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section) and socket WEO for use in hydraulic systems; is used to easy connection line hydraulicznego terminated wtykiem WEO. Po connection plug has freedom of movement in the socket, co zapobiega screwing lines in trakcie installation. Working pressure: 350 bar (for sizes for 3/4"), 250 bar (for rozmiaru 1"). Material: case-hardened steel. Operating temperature: from -30°C to +100°C. sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose industrial intended for washing hot water floors and equipment in industry food, dairy, paper etc. is suitable also for use external. resistant to conditions atmospheric, ozone and abrasion. Inner layer: white rubber SBR. Reinforcement: a synthetic braid. Outer layer: white rubber SBR. Working pressure: 10 bar. Operating temperature: od -40°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle extended straight type Star-Tip, reducing level noise; installations directly for the body the gun. Sound level below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with the OSHA 1-13.1 standard. (European Agency for Safety and Health at Work). length nozzle: 300 or 500 mm. pressure working: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling socket 1" with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with a thread external NPT and valve intended is for detection gases, devices medical, analyzers chemical, printing inkjet, as equipment devices optical, itp. The characteristic design (it does not contain balls and a locking sleeve) allows easier, secure one-hand connection and disconnection. An audible click signals a successful connection. Length L - total length. Material: acetal. Sealing: NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with a thread internal BSP intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 45° NON SKIVE with BSP female thread, with 60° cone sealing with an O-ring (DKOR 45), intended for crimping onto hoses type 4SP, 4SH, R13 and R15 using a ferrule TI-N.... Assembly: without skiving gumy hose. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting 90° INTERLOCK with metric female thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngled fitting 90° type RBU with a nut, spherical, 60° cone seal, intended for low-pressure rubber and plastic hoses, unreinforced and with textile reinforcement, with an external steel braid. Commonly used in flexible lines for sanitary fittings, fuel and air installations, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHex nut for the ball fitting - insert for a nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with a BSPT male thread intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard rubber pressure gauge o diameter disc 63 mm, fully role protection against impacts and destruction. Intended for pressure gauge with connection lower and rear.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong cover equipped in a fastener Velcro® - „hook-and-loop” along the entire section, easy for installations na bundles lines and for disassembly. fabric with which made is SAFE WRAP is characterized excellent strength na stretching (EN ISO 13934-1) and is in 100% waterproof (EN 24920). SAFE WRAP meets also requirements standard ISO 3457 (carried out test porosity). is characterized high resistance na abrasion. Available in other diameter internal. Material: black fabric polyamide coated with outside black polyurethane. Operating temperature: from -20°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA blade spare for cutter TC15 (SH-TC15).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing sealing MKV with a thread internal BSP for couplings transfer TW. Do Applications with a ring closing MKH. Together they molds an MK coupling. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). Intended for liquids, bulk materials and gases (except liquefied gas and steam). Material: steel AISI 316. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing coupling (type the gasket GSD, for 4" type TWO): hypalon. sealing thread (type the gasket GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGun PROFICLEAN 416 with regulation stream flow and a lever drain with protection. solid and light aluminum The design. A handle coated rubber NBR. especially recommended for machine tools CNC for coolant and for washing parts. standard in gun nozzle Ø 2 mm. Material: forged aluminum (body), aluminum anodized on black (regulation flow), brass nickel-plated (nozzle), NBR (A handle). Pressure operating: from 4 bar to 6 bar. Pressure working: up to 25 bar. Operating temperature: od +5°C up to +90°C. weight: ok. 750 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimping press P20 X to basic stationary device for workshops and small plants, producing lines hydraulic o diameter internal for 1.1/2”. press with simplified system hydraulic, intended is for performing single lines (production unit). Powered is motor electric occurring in two variants supply: 1 phase 230 V o power 1.5 kW and 3 phase 400 V o power 2.2 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp adjustable is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or Hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA 90° flange connection of compact design with a flange of a hole pitch diameter from 26 mm to 72 mm, with a BSP female connection thread. Used in hydraulic pump connections. Supplied as standard with a set of bolts, washers and an O-ring. Material: carbon steel, galvanized. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with a BSP female thread type AI 13500 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 22 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO bolt with washers, with female thread, type D9, for type R13, R14, D12, D17, D5, D6 fittings. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee "Y" with BSP female threads, type A23, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandle assembly for pipes in system SPEEDFIT. Material: plastic plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: galvanized carbon steel (W1).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gasket for a railway nut, compatible only with nuts of KGW-type fittings. Material: EPDM. Operating temperature: from -30°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality rubber hose delivery manufactured in USA o layer internal made with resistant chemical polyamide (nylon). very smooth surface inner reduces losses flow and ensures ease cleaning. Reinforcement synthetic a braid textile ensures high resistance pressure and small deformation pod pressure. smooth Layer outer with rubber synthetic, resistant na contact with chemicals and oil (RMA Class B – resistance medium). Dla hoses o diameter internal 1/4" and 3/8" Layer outer antistatic R 6 Ω. hose intended for applications industrial, in particular for solvents organic and substances petrochemical. good resistance polyamide na many solvents allows na use hose in industry paint, for conveying paints, varnishes, adhesives and resins. should always take into account resistance chemical and any problem electricity static. W particular antistatic hoses o diameters 1/4" and 3/8" are wide used as hoses for paints supply pressure A gun spray in workshops automotive, construction and industry. checking resistance chemical: table resistance chemical PA (selection initial), confirmation resistance and conditions use through Tubes International. assembly: should use fitting with a spigot ("tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with polyamide. possible is use typical ends hydraulic. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly depending on pressure working hose clamps clamping, ferrules clamping or for greater diameters clamps shell. typical factory hoses for guns spray have often fitting screw-together repeated use. Inner layer: polyamide (PA), without silicone. Reinforcement: braid textile single for 1/4" and 3/8", double od 1/2". Outer layer: black rubber synthetic. pressure working: 52 bar. temperature use: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose intended for extraction and conveying under slight overpressure dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. hose made is with polyether - polyurethane and has good resistance to abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope conveying bulk, dry materials food. complies with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 1895/2005/EC, 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „d”. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Reinforcement spiral with hard PVC ensures good resistance to crushing. Used in various industrial applications, in particular in industry agricultural – food, plastics, materials construction etc. versions: standard and antistatic - has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective earthing cable ensures sufficient for many applications level discharge charges electrostatic. the given Wall thickness hose, measured is between spiral. Hose material: transparent polyether-polyurethane. Reinforcement: rigid-PVC spiral. Operating temperature: od -25°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. standards: exceeds EN 853 1SN, ISO 1436-1SN, SAE 100R1-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 40 bar to 225 bar depending on the diameter hose. Operating temperature: od -50°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, flexible hose completely free of plasticizers for applications chemical and food - demanding high resistance chemical, of regard na character substances (np. wine – alcohol, acids – sok orange) or used agents cleaning and disinfecting. resistant na acids, bases, salts, alcohols and ketones, o very low level absorption and adsorption. minimizes to risk changing properties, taste and smell liquid even at repeated use hose. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. resistant na chemical agents cleaning and disinfectant. Not recommended for hydrocarbons. meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA 21 CFR 177.1520, NSF-51. possible sterilization oxide ethylene or radiation (for 2.5 Mrad). compliant with REACH – nie contains substances hazardous and banned. appropriate combustion used hoses nie causes release hazardous substances (np. hydrogen chloride). hose used both for substances food (np. dispensing wine) jak and chemical: installations detergents, dispensing paints printing, filling accumulators acid, analyzers chemical. Length of a full hose roll 15 m (for diameter internal 25.4 mm – 7.5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: polyolefin. temperature use: from -75°C to +54°C. temperature brittleness: -75°C. Hardness: 75° Shore (A). Density: 0.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. is characterized flame retardancy and resistance on sparks welding, hot chips metal. resistant to hydrolysis, corrosion biological, radiation UV, solvents and detergents. withstands vacuum 0.9 bar. The calibrated outer diameter allows use with push-in connectors. Hose material: flame-retardant polyurethane PUR. Working pressure: 20 bar. Operating temperature: od -35°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial high-pressure version hose PTFE SMOOTHBORE o thickened wall of specially processed PTFE (reduced micro-porosity) for applications with gases high-pressure in double braid (braid aramid and steel) and with external layer with Hytrel. Layer outer with Hytrel made is in four colors: black, blue, green and red, for markings purpose hose for defined kinds gas. when required is simultaneously Layer inner HPG and antistatic AS, possible is use hose HPG/AS (color red), with additional thin layer antistatic AS inside basic layer internal with natural PTFE HPG. assembly: use fitting and ferrules series AF-TL... Material hose: smooth PTFE (teflon) HPG. Reinforcement: braid aramid + braid of steel AISI 304. Outer layer: micro-perforated Hytrel (color polyester). pressure working: 300 bar. temperature use: from -50°C to +70°C (of regard na layer external with Hytrel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying water or compressed air in systems irrigation, agriculture, mines, on squares construction etc. Layer inner smooth, co ensures minimal losses flow. Layer outer lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant to abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. Not requires washing and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). use for air should be always preceded analysis risk in case accidental disconnection or bursting hose. Hose material: black blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: from 10 bar to 25 bar (water), from 7 bar to 18 bar (air) - depending on the diameter hose. temperature use for water: od -20°C up to +80°C, momentarily up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for high-pressure systems grease constant. standard: DIN 1283. Inner layer: blend polyethylene. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -20°C up to +40°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, hose suction-delivery intended for pressure conveying water, beer, wine, alcohols with a concentration up to 20%, juices, drinks, other liquid substances food and light chemicals. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with galvanized wire steel, embedded in layer internal, PVC, ensures good resistance to vacuum and kinking hose. smooth Layer inner reduces losses flow and ensures ease cleaning. thanks to reinforcement a braid hose has high resistance pressure and small deformation under pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: a polyester braid, steel spiral. Working pressure: from 10 bar to 20 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -5°C up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery pliable and flexible, A universal hose suction-delivery intended for water, liquids and light chemicals. used for loading and unloading tankers, IBC containers and for conveying liquids in installations industrial, itp. retains high flexibility at sub-zero temperatures ambient. smooth inner wall facilitates maintaining hose in cleanliness and increases unloading efficiency by 20% compared with typical rubber hoses. Layer outer resistant to abrasion and conditions atmospheric. W industry food It can be used for conveying and transfer food hydrated, acidic, alcohols for 20% np. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 2 h). Not recommended for milk and dairy products or oils and greasy food substances. hose VACUPRESS SUPERELASTIC complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: white PVC. Reinforcement: steel spiral, a polyester braid. Outer layer: black PVC. Working pressure at a temperature of 20°C: from 5 bar to 20 bar - depending on the diameter hose. Operating temperature: from -25°C to +60°C. As the working temperature rises, the hose's working pressure value decreases.
