Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - insert acc. to EN14420-4 with smooth "a tail" for mounting a shell clamp RS. or for crimping sleeve TI-LR, TI-LDR. for Applications in industry, np. for connections with hoses flexible. Material: steel carbon, galvanized. pressure working: up to 25 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting with a thread internal, with a nut brass, for washers high-pressure. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° INTERLOCK with BSP female thread, 60° cone with an O-ring, for hose type 4SH, R13 and R15. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew-together threaded fitting type S1 with BSP female thread (with flat gasket), manufactured in accordance with EN 14424, intended for rubber hoses and certain types of thermoplastic hoses with soft textile reinforcement (without wire spiral). Widely used in the fuel sector in fuel and gas distribution lines (e.g., LPG). The basic version is made entirely of brass; also available in a chrome-plated brass version (nut and sleeve) and in a stainless steel version (fitting) with a chrome-plated brass sleeve. Material: brass (B), polyurethane (PU) gasket. Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: from -20°C to +65°C (from -30°C to +70°C for LPG).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass cross connector type AI 13510 intended for joining copper, brass, steel, aluminum, etc. pipes as well as plastic pipes and hoses (e.g. polyamide). Range of external diameters of the joined pipes from 4 to 14 mm. The tightness of the connection is achieved by clamping the ring onto the joined pipe and simultaneously pressing the pipe with the ring into the socket by means of a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / Details"T" connector for a hose, type NA. Intended for use in control systems, in installations for the transport of gases and liquids, in vacuum installations, etc. Working pressure: up to 10 bar. Material: acetal copolymer (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance bent type ST-85 intended for a high-pressure washer. Smooth regulation angle bend lance od 20° for 140° allows washing surface hard reachable e.g. chassis and roofs vehicles, tanks etc. Connections: (inlet) 1/4" BSP female / (outlet) 1/4" NPT female. Working pressure: up to 210 bar. Operating temperature: up to +150°C. Material: steel galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, flat (at rest), delivery hose intended for conveying water. economical solution for average conditions use. used in agriculture, construction and in other fields industry. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the diameter hose and temperatures and type hose (LD, HD). Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialized hose suction-delivery for water and sewage in installations sanitary na ships, boats motor, yachts, itp. hose odorless and impermeable odors of drainage sewage na outside (5-year warranty). Layer outer resistant na factors marine and conditions atmospheric. has resistance na vacuum. compliant with the standard EN ISO 8099. Na special order Available version SANITARY STAR / 7 o pressure working 7 bar. length standard: 60 m or 120 m. Inner layer: white rubber synthetic. Reinforcement: braid synthetic, spiral steel. Outer layer: white rubber synthetic. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. pliable and flexible, also in low temperatures. compressible, smoother inside in comparison hose ECO 0.4. O sound resistance to abrasion, resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.6 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature angled pressure-reducing valve type RMC (threaded connection with an O-ring at the inlet and a push-in connection at the outlet); thanks to its geometry it keeps the tubing parallel to the other installation components. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple double with a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar. The given dimensions are indicative and may differ slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 double clamp, type 301 (with a top plate) intended for quick, easy, durable and aesthetic mounting of pipes, cables and hoses in various branches of industry, in above-ground and marine installations. Made in accordance with the DIN 3015 standard. The clamp is mounted to the structure by welding the clamp base (it is also possible to bolt it on or mount it on a rail). As standard, the clamp has a profiled (grooved) surface of the pipe hole. A clamp with a smooth hole surface is also available, intended for hoses and cables, marked with the letter H at the end of the index code. In addition to the standard metal element, you can order: extension plates, rails and bolts for mounting clamp sets. The selection of element should be consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: from -40°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial oil for lubrication and maintenance equipment pneumatic in accordance with the standard DIN 51 524 – 2 with class viscosity VG 32 (in accordance with the standard ISO 3448). oil ten contains substances surface active, which ensure protection against corrosion in wide the scope temperatures od -20°C up to +80°C. packaging: 1 l, 5 l.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm-drive clamp with a band width of 9 and 12 mm, intended for quick and easy repeated fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The bridge's task is to enclose the spiral wire and ensure the clamp fits the hose accurately. Using a bridge in the clamp provides a tight connection that does not damage the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The clamp's unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. The number of segments depends on the clamp's minimum/maximum diameter. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing sealing MKV with a thread internal BSP for couplings transfer TW. Do Applications with a ring closing MKH. Together they molds an MK coupling. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). Intended for liquids, bulk materials and gases (except liquefied gas and steam). Material: brass. pressure: od -0.8 bar up to 16 bar. Operating temperature: from -20°C to +65°C (should take into account medium and Material sealing). sealing coupling (type the gasket GSD, for 4" type TWO): NBR. sealing thread (type the gasket GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready line for air made with hose WTZ o diameter 10 mm and o length 10 or 15 m. terminated brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) standard quick coupling pneumatic Eurostandard DN 7.2. the simplest solution for connection tools pneumatic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: from -5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducer symmetrical (reducer concentric) for welding butt for applications pressure made with pipes seamless, compliant with the standard EN 10253-4 (steel stainless). With an EN 10204 3.1 material certificate. Widely used in industry in the construction of installations and pipelines, among others as element of complete welded ends for metal and rubber hoses (welded with threaded and flanged ends) and other couplings and fittings. On request, other sizes and materials are also available, including reducers of more than two DN sizes and ASME reducers. Dla fittings type A (EN 10253‑4A) resistance na pressure can be slightly smaller than for tubes straight o tej same diameter D and wall thickness T. Working pressure reducer can determine using coefficient correction pressure the given in standards EN 10253 (for given sizes approximately 1.0 ÷ 0.9 pressure corresponding dimensionally tubes). Na special order Available are other types fittings for welding-on butt: elbow 45° and 180°, reducers eccentric, tees, caps. Material: steel stainless AISI 321, AISI 316Ti. Working pressure: od 61 up to 185 bar - depending on diameter.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGrease nipple hand lever 75/PK silver 500 g without tooling. Material body: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilencer with throttling MWSVL with a thread external used in systems compressed air in order to reducing level noise. The noise reduction that can be achieved by installing a silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the silencer axis, is on average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: from -10°C to +80°C. pressure working: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee reducing "T" with a thread internal BSP intended for use in pipe connections of industrial installations. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA tee reducing for the SPEEDFIT system, used in compressed-air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic plastic. pressure working: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum sleeve for mounting covers SAFE SLEEVE. diameter D1 - external diameter. diameter D2 - internal diameter. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BPMTKM for hoses termoplastycznych type MTKM or CNG. Diameter D1 - outer diameter. Diameter D2 - inner diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for the fitting NITO with a female thread type A.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber DOWTY, metric for connections high-pressure. Material: washer - steel carbon, sealing - NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 415 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible double hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 90°. Hose material: polyurethane PUR (blue + black). Working pressure: from 12 bar to 23 bar (depending on the diameter hose). Operating temperature: od -40°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose silicone Widely used in industry (e.g. in systems cooling and for hot air). exceptionally resistant to vapours oil mineral. hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: plies textile. Outer layer: blue silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high concentration carbon aromatic, hot oil and solvents. Ze regard na high general resistance chemical rubber FKM can be used for aggressive chemicals, in many cases also in elevated temperatures. used for transfer chemicals with tankers road and railway. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic and spiral steel. Layer outer with rubber chloroprene CR, antistatic, resistant na conditions atmospheric, ozone, abrasion and oils. built-in two copper cable for discharge charges electrostatic. compliant with EN 12115:11 (type M). Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Vacuum: 0.9 bar. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber CR. pressure working: 16 bar. temperature use: from -25°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling DN11.8 with fitting for hose, with a flange, facilitating fast connection spray gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA high-quality NiTO water quick coupling plug 1/2" with double fitting for hose, enabling Mounting hoses o two diameter. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium size plug quick coupling with a nut na hose, intended for installations washing, filtration water deionized, machines industrial, detection leakage, itp. Length L - total length. Material: acetal. Sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK E with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. both versions meet all required parameters and come from od reputable suppliers. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN quick-coupling plug cap, series 232 with a chain protecting against dirt and damage. Material: steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type FPU used in systems hydraulic as element opening free Flow rate in one direction. Flow rate throttled in direction opposite adjustable is using a knob. standard pressure opening 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow: A → A1 (free), A1 → A (throttled). Material: steel carbon, galvanized (body), steel (spring, stem), plastic (knob). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve 1/2" of steel stainless for multifunction use for water, agents cleaning, foam. can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall na its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. the connection: socket quick coupling DN11.8 in cover with rubber EPDM / BSP female with gasket flat (Viton). Material: steel AISI 304. pressure working: up to 60 bar. temperature use: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact, two-piece medium-pressure ball valve intended for demanding general applications. It can be used for precision fittings (instrumentation) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. Intended for in-line mounting. The valve is characterized by a large size range to ensure an adequately large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. Each valve is pressure-tested with nitrogen. Certified according to ISO 15848-1:2006 (E). Material the body: steel AISI 316. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: from -42°C to +204°C. pressure working: up to 137 bar (depending od temperature). connection: metric LET-LOK®.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal Two-part, flange ball valve type 2019S with full bore, a lock lever and connection for the actuator acc. to ISO 5211, intended for installations industrial. can be used for air, gases, water, water vapor, chemicals, products petrochemical, itp., taking into account chemical resistance material valve and sealing. Meets the requirements of the PED 2014/68/EU directive. Working pressure dependent is od temperature use. Material the body: cast steel stainless CF8M. Material the ball: cast steel stainless CF8M. Material lever: steel stainless AISI 304. sealing the ball: PTFE / RTFE. sealing stem: PTFE. connection: flange PN16 acc. to DIN 2501. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA set assembly system BIT (2 plate + 2 screw). Material: steel galvanized.
